Theme
Digital Transformation
Green Transformation
SUNG YANG MACHINERY CORPORATION
Product Description :
SAN YUAN Double Rail Wire Rope Hoist (Two Speed)
Three yuan double-track two-speed electric steel cable crane speed ratio
6 : 1 & 10 : 1.
The two-motor two-speed electric crane is designed as follows:
the fast/slow speed motor and the fast/slow speed brake are independent, and the fast/slow speed switching is performed by the clutch mode.
R PLUS TECHNOLOGY CO., LTD
Product Description :
1. Automatic detection cutting processing work. Prevent cutting process failure or missing.
2.After cutting the part surface smooth with better quality.Good quailty.High stability.
3.Best cutting state feedbacck signal function. Can be connected to the manipulator or robots. The installation is more convenient.Widely versatility.
4.Automatic testing possesses function. While system upfrades to industrial 4.0, ours products still can be used. Reducing the risk of investment and waste
TAIWAN MACHINE TOOL CO., LTD.
Product Description :
The Machine Center for next generation — TLV-850II
Applied field: general hardware processing, mold processing, precision parts
TLV-850II is known for its stability and capability of manufacturing with its high rigidity, which adopts the advantages from TLV-850. Furthermore, it applies the structure which fits the current trend.
－T-slot is used with the common specialization: 18mm
－Z-axis is adopted with the design of high rigidity, a bigger motor, and the strengthened structure so that it leads to perfect swarf performance.
－The tool magazine is well designed to provide the best stability.
－A stronger saddle and an enlarged base frame are also installed to stabilize the performance on cutting.
PALMARY MACHINERY CO., LTD.
Product Description :
Super rigid structure, stable without deformation. The double support bearing type spindles offer even grinding force on the contact surface. During grinding process, the stress is even on both ends of spindle to avoid taper shaped workpieces. Computer numerical control from 1 ~ 6 axes satisfy requests for customized specification. Fitted with wider wheel, suitable for efficient mass production.
YIDA PRECISION MACHINERY CO., LTD.
Product Description :
The MT-900 has a 5-axis milling head, two turrets, a tool magazine and twin spindles.
The design layout allows for maintaining a large work envelope for both lathe operations-turning and milling.
All six sides of a part can be machined without an operator having to manually resettle the workpiece, so nearly any parts can be machined in an automated manner.
SGCAM TECHNOLOGY CO., LTD.
Product Description :
主功能介紹：<br />
全中文畫面，易學、易懂、易用，為加工業最適合的加工軟體，操作軟體完全不用背指令。<br />
可由AutoCAD製圖畫出工件外形，再匯入DXF圖檔，轉換為CNC程式碼。<br />
參數式的加工資料設定，作CAM只需三個步驟：（1）選擇工法（2）指定加工參數（3）計算、轉出加工G碼。<br />
參數式的資料設定，圖形改變後，加工碼會自動隨之改變。<br />
智慧型功能：<br />
工法和加工的輪廓可直接複製修改，不必再重新指定。<br />
自動清角可自動清除前一把刀具，所留下來的角落殘料。<br />
鑽孔時依據孔徑大小，自動搜尋鑽孔的加工位置，不必每一孔都去點選指定。<br />
字型可自動截割輪廓外圍不用慢慢編修。<br />
支援單筆劃字型刻字。<br />
加工路徑最佳化，各加工路徑間依最短距離自動計算，且可指定各加工路徑間不提刀以縮短加工時間，達到最佳之加工效率。<br />
立體加工： 不必畫3D曲面圖形就可做出立體加工工法，簡單夾治具可自行製作。<br />
牽引面加工：可加工彎管、簡單的立體。<br />
規則面加工：規則斜面、四角錐面、圓錐面。<br />
旋轉面加工：圓球面、葫蘆形狀。<br />
Z軸投影加工：可在不等高的平面上作投影加工。
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
Product Description :
1. CEN03 type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors. With CAB or CBB type volume distributor, oil will feed during operation time. With CDB or T type volume distributor, oil will feed during interval time.
2. The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil.
3. It has a spark-eliminator inside to prevent the sparks producing when the electric current is running. The spark-eliminator can avoid PLC (Programmable Logic Controller) being interfered.
4. CEN03 type has a pressure switch device and been set up as 8kg/cm2, which assures the oil volume of lubrication point and check if the piping works normally. The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have signal. NO (Normal Open) contact is available on request.
5. It has a float switch that can detect the oil volume. When oil is lower than the minimum level, the float switch will automatically send a continuous signal.
6. It has a pressure gauge where an operator can check the pressure easily.
7. Do not press the force feed-oil (F button) more than three minutes in order to avoid overloading. When the temperature reaches 100℃, the sensor will be on to stop the motor continuing running about 5 minutes.
8. It can be used for the machines requiring strictly rationing oil flow. It is usually used for such as processing machines or projecting machines.
