Category
Digital Transformation
Green Transformation
JIN YEAR PRECISION CO., LTD.
Product Description : Features: 1.Pressure Constant. Clamping force can presetting, repeat use the same clamping force. 2.Vise body is made of ductile iron FCD-60. 3.Vise bed hardened to HRC45° and maintain accuracy for long. 4.Vise body height-size and the guide block side are all made with full control, can 2、3 or 4 vises to perform a job at a time. 5.The length of vise body is very short, but the clamping range is very big. It works with every kind of milling machine, CNC machine center.....
G-TECH INSTRUMENTS INC.
Product Description : A rotor that does not perform dynamic balance correction may produce unnecessary vibrations and thus reduce the productivity of the machine, as well as damage to the bearings. At the same time, it may cause damage to the outer frame or supporting device and foundation during severe movement. G-Tech HJ-4250S-A Hard Bearing Balancing Machine is applicable for tool machine spindles, high-speed built-in spindles, motor rotors / motors, rollers, fans, centerless grinding wheels. A maximum rotor weight of 500kg, a maximum rotor diameter of 1 meter, and measurement accuracy at low speed dynamic balance is 0.5gram-mm(max), and the can be 0.05gram-mm(max) at high-speed dynamic balance.
DKSH Taiwan Ltd.
Product Description : The PC R series evaporators have a heating system based on a heat pump and operate under vacuum at 5kPa and around 30°C (86°F). Heat exchange occurs within a conical jacket, and the boiling chamber inside part is cleaned by internal scrapers that continuously stir concentrate. This configuration is designed to produce a concentrate with a high final concentration and a distillate with low conductivity. •From 0,1 to 2 m3/day – 0.02 to 0.37 US gpm of distillate •Dramatic reduction of volumes and disposal costs •Matter recovery Extremely suitable when: •the wastewater has a high initial content of dissolved or suspended solids •the wastewater is already pre-concentrated •the daily volumes are relatively small •the distillate has to be of the highest quality •the concentrate has to be recycled
PARFAITE TOOL CO., LTD.
Product Description : 1.細長型設計,可進行深孔加工並克服干涉 2.刀具偏擺≦3μ,減少刀具磨耗,大幅提升面粗度 3.一體式結構設計,並經超冷處理可防止變形保持精度 4.特殊材質,可重複加熱使用數千次
Search Exhibitors PULL