Theme
Digital Transformation
Green Transformation
HC FENG CO., LTD.
Product Description :
4 in 1 Coolant Purification System
1. Filtering floating debris and dirty particles
2. Oil/Water Separation, removes tramp oil down to 5% water content
3. Ozone Disinfection, eliminates bacteria and cleaned fluid backflow
4. Automatic control panel and pH detect device
CHIAH CHYUN MACHINERY CO., LTD.
Product Description :
■Double built-in spindles with high accuracy C axis, max. speed 10000 rpm.
■The large number of available tools increases your productive time, efficiency to process turning, milling, drilling and back machining.
■Front tooling system provides 6 O.D. tools, 5 I.D. tools and 3 radial live tools plus 2 expansion adapter live tool units.
■Back tooling system on Y2 axis can have a max. of 8 live tools, also provide two deep drilling holders beside the sub spindle.
YING HAN TECHNOLOGY CO., LTD.
Product Description :
5-AXIS VERTICAL MACHING CENTER BELONGS LINEAR WAYS ON THREE AXES, X, Y, Z -AXIS TRAVEL: 800x600x550mm, MEEHANITE CAST IRON IS TEMPERED FOR STRESS RELIEF TO ENSURE STRUCTURAL STABILITY WITHOUT DEFORMATION. REINFORCED COLUMN BASE GREATLY INCREASES STRUCTURAL STRENGTH AND WILL EXHIBIT ULTRA-HIGH STABILITY DURING HIGH SPEED OPERATION. WITH THE EQUIPMENT OF CNC TILTING ROTARY TABLE, THE MACHINE IS ABLE TO PERFORM 5-AXIS MACHINING, IT CAN MACHINE COMPLEX, MULTI-SIDED PARTS IN A SINGLE SETUP, THEREBY REDUCING SETUP TIME WHILE INCREASING PART ACCURACY.
HC FENG CO., LTD.
Product Description :
Replenishing Fluid automatically, accurate cutting fluid concentration. One equipment to multiple CNC machining centers. The supply line can be as long as 20 meters.
#Filtration by 3 filters #Sterilization by ozone # Oil-water mixer to precise mixing 0-10% cutting fluid #Stirring device avoid cutting fluid become stagnant water. #oil tank level meter for 50 gallon barrel low level detection.
HC FENG CO., LTD.
Product Description :
FOODIE (Chip/Sludge Removal Machine) works for :
Filtration/Removal of excess components
Chip/Sludge Removal
Fine Chip Removal
No downtime
No consumables
Backwater automatically & simultaneously
Air pressure drive w/o a plug
Vertically fast filter drying up to 90% efficiency
Precision filters effective up 20% for super filtration micro-fines
Easy to move
Filter accuracy can be adjusted
Extend cutting fluid life
SGCAM TECHNOLOGY CO., LTD.
Product Description :
主功能介紹：<br />
全中文畫面，易學、易懂、易用，為加工業最適合的加工軟體，操作軟體完全不用背指令。<br />
可由AutoCAD製圖畫出工件外形，再匯入DXF、IGS圖檔，轉換為CNC程式碼。<br />
不必畫3D圖形，一條輪廓線和一條路徑線一般2D圖即可輕鬆轉出車銑的加工程式。<br />
快速C軸填充式的輸入方式 ，很簡單的方式就能轉出C軸加工程式。<br />
參數式的C軸工法操作條件更改G碼自動跟著改變。<br />
製作程式時車銑工法可依加工順序任意作排序調整。<br />
3D實體切削模擬預覽，可避免干涉及過切事件發生。<br />
主軸和副主軸的獨動或同動會自動等待(指定機型) 。<br />
同一個程式中可同時指定不同的切削計算方式有走刀式、走心式、櫛式。<br />
車銑的刀具庫參數可依實際機台型號的刀具位置做個別指定。<br />
可在端面、圓弧面、橢圓面上做刻字。<br />
支援單筆劃字型刻字。<br />
系統支援：<br />
支援廠牌有Citizen 、Star、Miyano、Tsugami、洽群、縉錩、利高、精機、瀧澤、程泰、寶麗金…<br />
支援側銑側鑽等循環加工指令G87、G88、G184<br />
支援極座標G12.1 、G13.1、 G112 、G113<br />
支援圓筒補間G07.1、G107
TAIWAN MACHINE TOOL CO., LTD.
Product Description :
Strong casting and the perfect boxway stucture provides excellent cutting capacity for TTB-20MW Series. Sub-spinfle with milling function and Y-axis can satisfy customers' miltiple needs.
-The one cast base incorporates FEM analysis to achieve its optimal ribbing and structure to further enhance machine rigidity and stability.
-The 30 degree slant bed design has low center of gravity for easier swarf management and better erogonomic design. The TTB-20MW Series also offer optional rear type chip conveyor.
-To make sure the usage life of Y-axis ballscrew will get longer, there are three bearing on Y-axis ballscrew to enhance the support for pressure from top.
-The TTB-20MW Series can achieve maximum 20m/min for X axis and 25m/min for X axis. And the servo motors adopt absolute encoders for faster and more reliable positioning.
VICTOR TAICHUNG MACHINERY WORKS CO., LTD.
Product Description :
．Turning & Milling in one set-up
．Y-axis travel 260 mm (10.2")
．Max. turning dimension Ø500 x 1075 mm
．Turning spindle 4200 rpm / 15 KW with 8” chuck for Vmt-X200, or 3500 rpm / 22 kW with 10” chuck for Vmt-X260
．Milling spindle 12000 rpm / 22 kW
．with HSK-T63 / A63 tooling
．ATC-40 tools
MING YANG MACHINERY CO., LTD.
Product Description :
This heavy duty multi-tasking turning center is an advanced and economical solution designed to process precision complex parts with fast cycle times.
Power & Versatility: It has Double Spindles, a BMT 12 station turret and 4 gang tools for economical machining. Coupled with superimposed cutting it’s a powerful solution for precision complex workpieces with extremely fast cycle times.
Front Machining: BMT 45, 12 Stations, Up to 24 Tools, 7.5/11 kW Spindle Power, 55 mm Through Hole
Back Machining: GT42: 4 x 20 mm ID Tools, GT52: 4 x 16 mm ID Tools, Or 3x 20 mm ID Tools, Or 3x 25 mm ID Tools
