Theme
Digital Transformation
Green Transformation
FINTEK INDUSTRY COMPANY LIMITED
Product Description :
Initial pinch 3-Roll plate bending machine
Affordable single pinch bending application, flexible use of small space workshop
3 rolls camber designed with hardness HRC 50-53 degrees, dealing with various material processing
Build in high quality hydraulic system with overload protection
The first choice for petty workshops or personal studio, small invest and fast get back
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
Product Description :
1. KGC and KGCP types are suitable for grease NLGI grades 000, 00 and 0.
2. Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir.
3. KGC and KGCP types are controlled by PLC (Programmable Logic Controller). It can work with CV type Progressive Feeders which can supply fixed volume of grease. CV type Progressive Feeders can assure each of lubrication point has equal amount of grease.
4. Pressure switch can be added on request for checking if the piping works normally. The standard setting is at 60 bars and the standard specification is NC (Normally Closed) contact, which means if the pressure doesn't reach the default setting, it sends continuous signals. NO (Normally Open) contact is available on request.
5. Magnet Level Switch is also an optional accessory that can be added upon request. It sends continuous signal automatically when the grease level is lower than the minimum level.
6. For the first time use, slightly press the Feed button (F button) to feed grease immediately. F button can be used as manually grease feeding for no more than 3 minutes.
7. AC110V and AC220V motors have thermal controls. When the motor temperature reaches 100℃, the sensor will be on to stop the motor continue running about 5 minutes.
8. It has a pressure gauge that the operator can check the pressure easily.
9. It can be used for the machines requiring strictly rationing grease flow. It usually works with rubber or plastic machines, press machines, machine centers, woodworking machines, etc.
JARNG YEONG ENTERPRISE CO., LTD.
Product Description :
1. High rigidity body structure, machine base casting is integrally formed and high rigidity linear guide way, providing stabler, faster and higher precision.
2. Built-in main spindle is with C-axis function, high speed, big power, high precision and low vibration which can make surface of workpiece smoother.
3. Optional：Synchronous rotary guide bushing device, it's suitable for processing long workpiece which can reduce cycle processing time and improve production efficiency.
4. Sub-spindle is with C-axis function, it can work with live tooling for end side drilling, tapping and milling.
5. It can depend on different demand of machining to with or without Synchronous rotary guide bushing device.
6. Axes：Z1/X1/Y/C1/Z2/X2/C2 + 3 sets of live tooling devices (A/B1/B2)
7. Max. 23 tools, can do machining on front side and back side at the same time which can save time for processing.
8. With guide bush type travel is 180mm, min. offal is 150mm. Without guide bush type travel is 310mm, min. offal is 50mm.
HONG JI PRECISION MACHINERY LTD.
Product Description :
Drilling capacity is from Ø5mm to Ø40mm and the max. drilling length is 3000mm
The machine is suitable for drilling accessories of petroleum system, tube holes of heat-exchangers, long mechanical sleeves and long aerospace parts.
Slideways of all axis are harden box ways with heat-treatment to HRC52, this design has good damping to absorb vibration as drilling big and long holes.
The worktable is loaded on the harden box slideways with width 200mm. The max. loading weight on the worktable is 20tons.
The width of column is 2 meters with two sub-columns to provide the excellent support to Y-axis as moving up and down. Total weight of the machine is about 38tons.
SHAN HUA PLASTIC INDUSTRIAL CO., LTD.
Product Description :
善化工業股份有限公司專業生產符合SAE100R7、SAE100R8規範之高壓油管。<br />
擁有最多樣尺寸、顏色、配置及包裝供客戶選擇。<br />
產品特點為重量輕，約橡膠管重量的1/2，受壓力時，曲線不變。<br />
採用耐候、耐磨擦、耐油性的特殊材質。可耐用各式酸鹼，並可選擇外管顏色，便利於顏色管理，亦可選擇導電和非導電型，以確保機台人員的安全。<br />
用途方面，除了可以完全取代傳統橡膠管外，可用於各式高壓液體、高壓氣體、噴塗裝機、清水溝車、農業機具、轉向系統、船舶用管等，各式液、氣體配管均可使用。<br />
KAO FONG MACHINERY CO., LTD.
Product Description :
5-axis synchronous machining of the KMU series can be used for multi-faceted processing of workpiece clamping positioning at one time or processing deep hole mold and inverted hook area.
Three-axis structure using box-type construction design, which can effectively improve the rigidity of the machine.
X / Y / Z axis with high rigidity roller type linear guideway, with high rigidity, fast moving, low wear and other characteristics, which can greatly enhance the processing dynamic precision and stability and effectively increase production efficiency.
HAI JU TRADING CO., LTD.
Product Description :
High-strength connection and maximum sealing
Can you imagine high-quality products without screw connections?
Modern technology cannot do without them as detachable joints. In the industrial
sector, fluid technology, pneumatics and sealing technology are among the fields of
application. In those sectors, often additional functions such as sealing, insulation or
reuse of bolts are required – only to mention a few.
One classic example are adjusting screws on hydraulic components, steering boxes
and fuel injection pumps. For those applications, high-strength screw connections
with reusable bolts and sealing against leakage are essential. We provide the solution
that fulfils those high requirements: the SEAL LOCK® sealing nut. It prevents any
unwanted leaking of gaseous or liquid media. The SEAL LOCK® ring integrated on
the nut helps to achieve reliable sealing inside the thread without the use of
additional elements. It is reliable in two ways because it seals under the head and
inside the thread. Not to mention the easy installation.
The following figures show conventional solutions on the one hand and the
SEAL LOCK® sealing nut on the other hand.
