Theme
Digital Transformation
Green Transformation
WELE MECHATRONIC CO., LTD.
Product Description :
1.高剛性高穩定性結構
A. 底座：機器底座採用整體式鑄件，有效確保機器剛性。Z底座採4線軌設計，全行程範圍內直接落地支持，有絕佳的剛性及穩定性，確保整體長期幾何精度。
B. 滑座：滑座採用整體式鑄件，支撐於Z底座上，4線軌設計增加滑座負載剛性。
C. 立柱：立柱採用整體式鑄件，有效確保機器剛性；且固定不移動，大大減少主軸移動行程中所帶來的幾何精度誤差影響。
2. XYZ三軸及W軸導軌均採用先進的超重負荷型「滾柱」線性導軌，大幅度提高導軌「剛性」和「重切削能力」，也繼續保有「低摩擦力、低磨耗、低遲滯現象、低失位量、高速度、高精度、高動態特性、高壽命、不需調整」等線性導軌的優良特性。
3.XYZW四軸的均有過負載保護，如因誤操作造成撞機，可有效降低對機器的損傷。
4.雙編碼器回饋裝置（配置於XYZ三個進給軸)，B軸採用(圓光栅-角度編碼器) 廠牌：發格Fagor。
5.主軸箱等關鍵零件係利用「大型臥式搪孔機」及「大型高精度三次元量測儀（三座標量床）」確實達成應有的加工精度，確保優良的組裝基礎。
6.鞍頭：110主軸系統配備搪孔軸直徑110mm，搪孔軸行程W=500mm、3500 rpm(兩檔齒輪箱)。搪孔軸為氮化處理高硬度合金鋼件，前段支持使用傳統的硬化襯套外，後段附加線性導軌的加強支持，借助滾動低磨耗的特性，增長搪孔軸的精度壽命。
7.主軸前軸承採用直徑150mm的高精度主軸軸承，加上改良設計的軸承配置及潤滑設計，有效的提高主軸剛性和壽命。
8.主軸鬆刀採浮動式抓鬆刀裝置，鬆刀時不會施力於主軸軸承上，可長保主軸最佳精度；另，新式鬆刀缸配置設計，可使主軸於任一行程(W軸)位置換刀。
9.特殊設計的自動潤滑系統；潤滑油與切削液分開， 單獨收集可確保切削液的穩定性及工作環境的清潔。
10.刀庫採立柱側背式設計；刀庫與立柱接合，不同於落地型式，立柱固定不移動，刀庫與鞍頭配置可達成左右平衡架構，提高W軸動態穩定特性。
11.承襲歐美先進工具機廠的標準，以嚴格維護的「1.2米x1.2米」高精密度的方形標準平板做為精密度的基礎，對各項關鍵零件進行精密鏟花（刮研），使機器的各處結合面和滑動面均能達到正確的幾何精度，確保機器應有的精度和壽命。
12.採用的各項配套零組件均經過長期使用驗證，可確保機器長期運行的可靠性。
13.電氣箱採全密閉式循環熱交換系統，內部配線均參考德國工業安全標準，電源部份與訊號線區隔，以增加機器使用上的安全。
14.搭配高規格的Fanuc 0i MF Plus數控系統，標準功能包含：15吋彩色液晶螢幕、Fanuc全鍵式操作面板、1280米記憶容量、Ethernet網路接口、Flash記憶卡插口、Manual Guide i圖形對話式編程、剛性攻牙、手動剛性攻牙、AI contour control II等多項高規格功能，能經濟有效的滿足各種使用需求。
15.完整的品檢測試流程，搭配先進的自動光學直準儀、雷射干涉儀、球桿檢測儀、線上動平衡儀等精密檢測儀器，確保出廠的機器都能達到設計的性能和應有的功能。
16.經驗豐富的研發團隊，突破老舊的包袱，協助客戶達成各種特殊需求。
17.兼具經驗和熱誠的服務團隊和完整的服務體系，可以及時有效的讓用戶的機器長保最佳使用狀態。
STAND TOOLS ENTERPRISE CO., LTD.
Product Description :
◎Release magnetic sweeper has a magnetic device which enables to attract any metal items and spare parts laying on the ground without picking them up one by one
◎Pull the trigger to release magnetic force
◎Easy to use, safe and practical time saving device
◎Permanent magnet
SONG GIA INDUSTRIAL CO., LTD.
Product Description :
【CROSS DRILLING/MILLING UNIT, 3-SPINDLE】
Speed ratio : 1:1
Maximum speed : 8000RPM
Tool clamping : ER11M
【DRILLING/MILLING UNIT FOR SUB SPINDLE】
Speed ratio : 1:1
Maximum speed : 8000RPM
Tool clamping : ER11
Machine :
33mm : SR-20R : STRB111203
36mm : SB-20R : STBB111201
47mm : SR-32J : STRB111301
BEST DIAMOND INDUSTRIAL CO., LTD.
Product Description :
Compared to resin bond and metal bond wheels, Electroplated Grinding Tools are noted for relatively large grit protrusion and higher abrasive concentration. This results in very free cutting properties and in high stock removal capacity. Besides, these tools are noted for:
1. Allow special shapes and profile tools to be made at short notice.
2. Cause very little change on wheel shape after used, suitable for precision grinding.
Application and Processing Material for Electroplated Grinding Tools :
1. Internal grinding: Suitable for the internal grinding of carbide and High Speed Steel. The smallest diameter of our electroplating area is 0.3mm so it could be used in drilling for fined ceramics.
2. Jig grinding: Mostly used in fined ceramics processing and precision grinding for quartz. Customized items are also provided to cater your needs. Common grit size is #80~#325, good for rough and fine processing.
3. Touchscreen Processing: Drilling and chamfering for the glass panel of the smart phone and tablet computer. In order to improve work efficiency, we could also combine different grit sizes in the same diamond mounted point.
4. Grinding for Cutting tools: Normal end-mill grinder and drill grinder go with electroplated wheel. Carbide can be ground by diamond wheel and High Speed Steel could be ground by CBN wheel. Bowl-shape wheel with standard specification is also provided, suitable for the grinding of turning tools.
5. Precision grinding: Electroplating can produce wheel of different shapes without deforming it. Therefore, it is suitable for precision grinding or trimming aluminum oxide wheel.
6. Gem grinding: shape grinding for gem, semi-precious stones, shell and jade.
Giant Red-Wood Int’l & Co. Ltd
Product Description :
RW-600A Hydraulic Riveting Machine (Mitsubishi 10” HMI)
(Without Feeding System)
-Safety Device to protect finger get injured
-Proportional Value Control System
-Double-Pumps hydraulic Designed
-Auto-Riveted Counting to avoid missing riveted
-Mitsubishi 10” HMI
-Control System: Mitsubishi PLC
-Pressure Range:2-53KN(6T)
-Horsepower：3HP
-C type throat depth：450mm
-C types throat height：400mm
-Power Voltage：220V Three-Phase
*Mitsubishi 10” HMI can ensure the pressure during the operation. It also can auto-check for faulty.
*Suitable Rivet：Nut up to M10, Bolt up to M8, FH Screw up to M6 (Carbon Steel)
* Proportional Value Control System: Specific Pressure adjust bottom designed, can adjust correctly pressure within 10 second, precision within+/-1%.
*Positive Stop System: Designed for soft working pieces to ensure the flat surface. Thickness accuracy up to +/-0.05mm
*OMRON 5” HMI can ensure the pressure during the operation. It also can auto-check faulty.
*Suitable Rivet：Nut up to M10, Bolt up to M8, FH Screw up to M6( Carbon Steel)
*Pressure control easy to operate: Specific Pressure adjust bottom designed, can adjust correctly pressure within 10 second, precision within+/-1%.
*Positive Stop System: Designed for soft working pieces to ensure the flat surface. Thickness accuracy up to +/-0.05mm
HSU PEN INTERNATIONAL PRECISION MACHINERY CO., LTD.
Product Description :
*Employs high rigidity, extra large radial and axial bearing.
*For models over 255, the tilting axis employs the latest full circumference brake, featuring even braking force without runout. Maximum clamping area, higher clamping force, no vibration and no braking delay is required. High torque combined with compact, rigid and enclosed structure ensure high cutting quality.
LEADWELL CNC MACHINES MFG., CORP.
Product Description :
Spindle nose A2-6 with 8” inch chuck for both spindles. The bar capacity of the main spindle is up to 52mm. Spindle uses high-power built-in motor with a maximum torque of 292Nm which for heavy cutting and surface milling operations. The capacity of the Y axis is ±50mm, which allow offset processing and increase the speed of milling.
Max. swing: 790mm
Max. turning diameter: 300mm
Max. turning length: 770mm
Bar capacity: 52mm
X1-axis travel: 235+15mm
X2-axis travel: 220+10mm
Z1-axis travel: 770mm
Z2-axis travel: 790mm
B-axis travel: 770mm
Y-axis travel: ±50mm
Spindle speed(Main/Sub): 4500rpm
Spindle nose(Main/Sub): A2-6
Spindle motor power(Main/Sub): 25kw
Number of tool stations: 16T
