Theme
Digital Transformation
Green Transformation
PARFAITE TOOL CO., LTD.
Product Description :
1.3μ以下跳動精度,可減少刀具磨耗,提升面粗度(刀具懸伸,為柄徑4倍量測值)2.具減振功能設計,可降低阻尼,提高加工穩定性3.夾刀操作簡單,縮短換刀準備時間4.重覆精度佳,可大幅節省校刀時間
Guhring Taiwan Ltd.
Product Description :
螺紋加工常應用於生產鏈末端，為零部件完成前的關鍵刀具，Guhring螺紋工具完美適用於生產鏈末端嚴苛的加工任務。<br />
●先端絲攻、螺旋絲攻、無屑絲攻、銑牙刀、內徑車牙刀、非標刀具訂製。<br />
●提供各類加工材質專用的螺紋切削工具，最大可加工硬度65HRC。<br />
●絲攻專用刀桿，降低機械誤差對絲攻所造成的軸向力，使絲攻加工壽命完全發揮。<br />
●特殊螺紋刀具訂製，提供最佳解決方案。
電子型錄：http://topwiner.com.tw/ebook/guhring/
DIATEC CO., LTD.
Product Description :
DR. KAISER修整主軸有多種型號，可以針對客戶工件需求提供適合的客製化產品。具備以下特點：
1.易於在齒輪磨床上安裝。
2.具剛性的液壓主軸安裝/夾緊系統。
3.具廣泛的轉速範圍，可適用同向或逆向修整。
4.配備空氣密封/過濾系統、溫度傳感器、主軸和鑽石修整輪的微平衡系統。
5.配備接觸性傳感器，自動優化修整過程及速率。
6.高軸向和徑向的跳動精度。
STANNY MACHINE TOOLS CO., LTD.
Product Description :
Large Diameter Boring System, the boring range Ø160~Ø1110.
7-LEADERS CORP.
Product Description :
Multipurpose End Mills with Corner Radius- 4 Flutes
Using UMG carbide material enable to enhance lubrication and wear resistance.
Effectively decrease the vibration by various helix geometry and unequal flutes designs.
Big chip breaker is designed to reach high removal rate for various work materials.
Cutting edge with corner radius design and nano multilayer coating AlCrN are suitable for carbon steel, alloy steel and stainless steel with impurities and sticky materials.
Suitable for various kinds of work materials from the end of roughing to finishing.
NINE-9 CUTTING TOOLS CO., LTD.
Product Description :
NC Helix Drill cuts material by helical interpolation; serrated cutting edge minimizes chip length.
Low spindle power is not a problem, good for drilling material that generates long, soft chips.
● Reduce Your Tool Inventory
Each holder can machine di erent diameters and hole depths, saving your tool inventory and cost!
No need to peck drill or dwell in operation even machine without internal coolant.
● Lower spindle power consumption Easy to cut!
• Thanks to the small cutting load of the serrated cutting edge and helical interpolation lower power consumption. Work quicker, smarter and achieve better results.
• Circular ramping milling, maximum ramping angle is 20°. For example: tool HD27 machining Ø50 mm hole, 9 mm pitch for aluminum, 6 mm pitch for carbon steel.
● Special insert geometry - exceptional swarfs control.
• Serrated cutting edge makes the chips short and small, and easier to evacuate.
• Eliminate swarf and vibration problems while drilling di cult material or deeper holes.
● “One tool” performs multiple applications
• Not only a drill, but an end mill too.
• Small radius path to cut a hole or step hole, various curved cavity shapes on di erent materials.
