展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
LEADWELL CNC MACHINES MFG., CORP.
製品の説明 :
The 5 axes simultaneous processing, can reduce the times of workpiece unloading and the requirement of the jigs, shorten the processing time and improve performance. C-axis table using the DD motor provides high torque and rigidity and can solve the traditional worm gear backlash and worn problems. High torque and efficiency of the spindle with a complete high-rigidity structure applied results in roughing to finishing can be completed on the same machine, suitable for machining hard materials and non-ferrous materials processing.
X-axis travel: 1300mm
Y-axis travel: 610mm
Z-axis travel: 610/750mm
Table size: 1480x610mm
Max. table load: 1600kg
Spindle speed: 12000rpm
C-axis speed: 800rpm
X/Y/Z-axis rapid traverse: 36/36/30 m/min
Tool storage capacity: 30T
GPM CO.,LTD.
製品の説明 :
● External mount type:
■ Suitable for single/two spindles machines
■ 2 linear guide/1 ball screw design
■ Y axis travel: ±50~60mm
■ Y axis equipped with electromagnetic brake.
■ Additional motor brake is possible.
● Central mount type:
■ 4 linear guide center-mounted screw design.
■ Interference is reduced by about 30%.
■ Suitable for high-complex processing.
■ Applicable for medium~light cutting.
WIN HO TECHNOLOGY INDUSTRIAL CO., LTD.
製品の説明 :
High Speed Precision Lathe
1. Selective bed width:
S series: 300mm.
M series: 350mm.
L series: 400mm.
2. Varied spindle bore diameters:
S series: O58mm / O80mm (Option).
M series: O85mm / O105mm (Option).
L series: O85mm / O120mm (Option).
3. With FAG or SKF precision bearings installed on
spindle, maximum cutting depth can be 8mm on
50mm diameter and best roundness 0.003mm
(200mm long).
4. Equipped with plastic rear gears, shafts and
gears inside headstock are well protected if crash
should occur (S430 & S480 Series).
5. Thermal treated and precision ground alloy
gears.
6. Universal gearbox for both imperial and metric
thread-conversion table also attached.
7. Tracks of cross slide and bed are well lubricated
with lubrication pump (manual).
8. Overload device to ensure safety when
operating.
9. Wear-resistant phosphor bronze lead screw
nuts.
10. Durable reservoir oil bath type cross slide (for S
series).
11. Thermal treated Meehanite bed casting.
12. One-piece base for high rigidity and low
vibration.
13. High-capacity coolant tank offers sufficient
coolant output.
14. All series certified for CE.
Reservoir Oil Bath Type Cross Slide
SONG GIA INDUSTRIAL CO., LTD.
製品の説明 :
4 Key Advantages：
●. High-Precision Structural Design
Featuring a rigid body combined with precision grinding, this design enhances machining stability and concentricity to ensure consistent accuracy in every operation.
●. Through-Coolant Direct to Cutting Point
Integrated through-coolant channel effectively removes chips and prevents entanglement, extending tool life and maintaining cutting performance.
●. Full Range of Models with Flexible Compatibility
Compatible with a wide range of sliding head machines. Custom configurations are also available to meet specific machining needs.
●. Locally Manufactured
Designed and made in Taiwan, delivering stable quality with professional technical support always on standby.
https://www.songgia.com.tw/en/products/live-tools-for-cnc-lathes/bmt-series
HEIDENHAIN CO., LTD. (TAIWAN)
製品の説明 :
Collision protection is a major topic at HEIDENHAIN. The touch probes feature a large deflection path and offer additional safety with rated breaking points in the stylus or the connecting pin to the probe contact.
The TS 460 and TT 460 touch probes feature intelligent battery management in order to minimize current consumption. The touch probe switches in steps to the stand by condition: The longer a touch probe has been switched off, the less current it consumes. Activating a touch probe from a low standby level takes only a split second longer. This ensures high, application oriented availability.
HAWE Hydraulik Singapore Pte. Ltd. Taiwan Branch
製品の説明 :
Compact hydraulic power packs are a type of hydraulic power pack. They arecharacterised by a highly compact design, since the motor shaft of the electric drive also acts as the pump shaft. Compact hydraulic power packs are designed to supply hydraulic circuits with hydraulic fluid.
The compact hydraulic power pack type INKA consists of the tank, the integrated motor and the radial piston pump or gear pump directly attached to the motor
shaft. The directly mounted electronic communication box with integrated realtime operating system allows the operating state to be recorded and visualised. The
measured values of the integrated multi-sensor (including the motor speed) can be passed on to the higher-level machine controls via standardised interfaces and processed there.
The consistently modular design of the type INKA means that different usage volumes and delivery flows can be realised quickly and easily from the modular
system. Compatible, ready-for-connection, complete solutions can be assembled easily using a wide range of connection blocks and the valve banks that can be combined with them.
Features and benefits
■ Prepared for condition monitoring with integrated sensors and communication box
■ Optimum efficiency through under-oil motor cooling, direct power transmission,and sophisticated heat dissipation
■ Suitable for nominal operating modes S2 (short period operation) and S3 (periodic intermittent operation)
■ Resource-saving due to small oil filling volume
Intended applications
■ Machine tools and material testing
■ Hydraulic tools
■ Handling systems
■ Presses and processing machines
TAIHO TOOL MFG. CO., LTD.
製品の説明 :
The blade design that emphasizes cutting force and the unequal lead groove shape promote chip discharge and realize high-quality threading.
The lineup includes screw type for blind holes and through holes, and features that chips are discharged upwards.
The tip sample is for through holes, and the characteristic is that the chips are discharged downward.
There are two types of pipe specimens: parallel thread for mechanical bonding and tapered thread for tightness.
YING HAN TECHNOLOGY CO., LTD.
製品の説明 :
5-AXIS VERTICAL MACHING CENTER BELONGS LINEAR WAYS ON THREE AXES, X, Y, Z -AXIS TRAVEL: 800x600x550mm, MEEHANITE CAST IRON IS TEMPERED FOR STRESS RELIEF TO ENSURE STRUCTURAL STABILITY WITHOUT DEFORMATION. REINFORCED COLUMN BASE GREATLY INCREASES STRUCTURAL STRENGTH AND WILL EXHIBIT ULTRA-HIGH STABILITY DURING HIGH SPEED OPERATION. WITH THE EQUIPMENT OF CNC TILTING ROTARY TABLE, THE MACHINE IS ABLE TO PERFORM 5-AXIS MACHINING, IT CAN MACHINE COMPLEX, MULTI-SIDED PARTS IN A SINGLE SETUP, THEREBY REDUCING SETUP TIME WHILE INCREASING PART ACCURACY.
HOLDING ELECTRIC CO., LTD.
製品の説明 :
The magnetic grinding machine is an innovative product of Holding Electric, and has won invention patents from many countries in the world
This patented device generates a magnetic field that motivates magnetized pins to bounce rapidly and to grind parts
Features
1.For High Precision
2.Grind Every Corner:
Effect
1.Deburring
2.Polishing
SAFEWAY MACHINERY INDUSTRY CORPORATION
製品の説明 :
Clamping system : Air+Mechanical power +M code
Suitable for Robot for automation
Can be connected to any machines ( I/O cable )
Built-in solenoid valve-24V
Type of socket and cables must be provided by customer
Standard cable length : 2 meters ( optional )
