展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
JAR HON MACHINERY CO., LTD.
製品の説明 :
1.Both cutting TAP and forming TAP are suitable.
2.Fully automatic tapping process. One operator can easily operate several machines at the same time.
3.By using proper master pitch gears(change gears A and B pair), highly accurate thread can be tapped. It is easy and quick to change different size.
4.The length of the tapping stroke can easily be adjusted for high accuracy which is suitable for tapping blind hole parts.
5.It has safe device to monitor the feeding, torque, radial, and clamping to keep TAP's long life and ensure safe working job.
6.It governed by PLC.
7.Long parts or those can't feed in vertical position are suitable.
8.Pre-work parts auto-checking and machine auto-stop if abnormal.
HUNG CHIH LIMITED COMPANY
製品の説明 :
ECOCLEAN has comprehensive range of cleaning equipment that provides
systems for virtually all types of cleaning tasks – for parts made of metal, plastic and glass. From coarse to intermediate to ultrafine cleaning, our systems do not
only provide an improved cleaning quality and a higher process reliability, but also guarantee cost and resource savings in your production. For the reliable and efficient
removal of oil, grease, emulsions and swarf.
CHUAN HONG PRECISION TOOL MFG. CO., LTD.
製品の説明 :
<<栓規‧螺紋栓規>>
"栓規"：專門檢查產品是否符合標準之量規。
"螺紋栓規"：專門量測產品(母螺紋)是否符合廠內、國家或國際標準。
<<錐度栓規‧錐度螺紋栓規>>
"錐度栓規"：專門檢查錐度產品(管用)是否符合標準之量規。
"錐度螺紋栓規"：專門量測錐度產品(母螺紋)是否符合廠內、國家或國際標準。
<<環規‧螺紋環規>>
"環規"：專門檢查產品是否符合標準之量規。
"螺紋環規"：專門量測產品(公螺紋)是否符合廠內、國家或國際標準。
<<錐度栓規‧錐度螺紋栓規>>
"錐度栓規"：專門檢查錐度產品(管用)是否符合標準之量規。
"錐度螺紋栓規"：專門量測錐度產品(母螺紋)是否符合廠內、國家或國際標準。
HOLDING ELECTRIC CO., LTD.
製品の説明 :
Holding Magnetic tools honing edge machines can achieve the following effects in a short time.
1. Trim the chipped and sawn edges to remove burrs and burrs.
2. Achieving consistent rounding processing, making the blade smooth, smooth, and sharp, durable.
3. Improve the surface finish and surface roughness of the workpiece.
4. Increase tool life and reduce the probability of chipping. The measured value can increase the tool life by up to 65%.
TSYR TZUN INDUSTRIAL CO., LTD.
製品の説明 :
1.With circuit protection of breaking for motor, once any wire of three phases power source is broken off, this unit could cut off current to motor to prevent motor from being burn out.
2. Drill sleeves、tapping adaptors and borer holder are with rapid adaptors, very convenient for replacement of cutters.
3.Tapping adaptors with torsion control, tap bits are protected from being twisted off.
4.MTM-932ADL comes with drilling force control unit for Auto-feeding:
When drill bit is worn out, this unit will drive feeding intermittently or stop feeding.
Once feeding becomes difficult while making a hole, Please replace a new drill bit or re-sharpen the worn out one in order to protect both drilling tool and machine body from being damaged.
5. MTM-932ADL comes with three intermittent breaking rates for breaking chips :
Choose different feeding rates according to different drill bits and material to perform Auto-feeding operation.
This device can break chips intermittently and discharge them while Auto-feeding is processing, so that chips would not roll on drill bit. Easier to discharge chips.
6. MTM-932ADL comes with three feeding rates for Auto-feeding:
Feeding rates are separately 0, 0.15 and 0.25, please choose suitable rate according to size of drill bit and material of work-piece for drilling.
7. The rotation speed of the MTM-932ADL can be changed quickly during running.
It's very convenient for the operator, and the efficiency is increased accordingly.
