Theme
Digital Transformation
Green Transformation
CHIEN CHENS MACHINERY CO., LTD.
Product Description :
Specification
Table size: 1515 x 470 mm
Longitudinal travel: 1300 mm
Cross travel: 600 mm
Y slide way width: 720 mm
Z Slide high: MAX 810 mm
Z Slide way width: 420 mm
Spindle taper: NT#40(BT)
Spindle motor: 5HP / 4P
Spindle speed: 70~3600 RPM
Feeding speed: 10~6000 mm/min
Ballscrew: Ø32 mm C5
Net weight: 3500 kgs
PRAISE PRECISION IND. CO., LTD.
Product Description :
NEW PRODUCT- CUTTING KNURLING TOOLS USED ON LATHE
Method of forming knurling
1. Press forming(Form knurling)
Press knurling tool directly to workpiece in turning on the lathe
to form the patterns. Pressure is applied to the lathe spindle, and the outside diameter of workpiece will become bigger
2. Cutting forming(Cut knurling)
The knurling tool is applied to workpiece just like cutting, less pressure
to lathe spindle and less machining resistance, forming a clear patterns, the best choice for using on CNC lathes
DEEP JET INDUSTRY CO., LTD.
Product Description :
1. With excellent features of coating to increase the tool's wear resistance and thermal conductivity to reduce the chip residue problem.
2. Use special flute design to decrease the chip-off problem during machining.
3. Increase machining accuracy and surface roughness.
TSWU KWAN MACHINERY CO., LTD.
Product Description :
本產品最大優點：
拆卸方便，清洗容易，省錢更兼具環保，
可重複使用的銅燒結濾油心，其精密度可達5μ-10μ
TAIHO TOOL MFG. CO., LTD.
Product Description :
The AERO series is very suitable for high-power equipment above 80KW.
It has a sharp cutting edges and grooves for great efficiency of discharging the chips. The coating is OSG's diamond coating with glossy surface. This bright and smooth surface optimizes the performance of the end mill, especially in aluminum alloy that weldability and lubricity are required.
The 3-short-blade type and center jet type (AERO-ETS, AERO-O-ETS) are corner radius end mills applied to roughing and finishing.
The 3-long-blade type and extra long blade type (AERO-ETL, AERO-EXTL) are corner radius end mills applied to roughing and finishing.
The 2-short-blade type (DLC-AIR-EDS) is corner radius end mills applied to roughing and finishing.
HOLD WELL INDUSTRIAL CO., LTD.
Product Description :
1.It divides into Axial & Axial Offset & Radial Offset & Angle Adjustable Type
2.Driven Coupling Type divides into DIN1809, DIN5480, and SPUR MT TOEM (Baruffaldi), DIN 5482, HAAS, Mori Seiki…
3.The accuracy is within 0.003mm
4.It can be applied on left and right hand turret.
JAR HON MACHINERY CO., LTD.
Product Description :
1.Both cutting TAP and forming TAP are suitable.
2.Fully automatic machine so a person can operate many machines.
3.Gear-pitch type auto. tapping will get a precise & accurate thread for finished workpiece.
4.It can option to add inverter or use servo motor to control the spindle speed.
4. Especially suitable for light workpiece.
PRECISION MOTION INDUSTRIES, INC.
Product Description :
●Equipped with lubrication unit G1, it can reduce the amount of oil used to meet the economic and environmental protection needs in response the carbon reduction trend.
●In required clean environment where it is necessary to avoid oil scattering, and also prevent to temperature rise caused by injecting too much oil.
●Contains more than 70% oil and can run more than 20,000km without oil supply, also easy to supply oil in difficult filling places and saving a lot of maintenance time.
●Even in an environment with water, there is no need to worry about oil and grease being washed by water.
●The extra lubrication unit equals an extra layer of scraping effect, which greatly reduces the chance of foreign matter invasion.
IGUS TAIWAN COMPANY LTD.
Product Description :
●拖鏈系統<br />
根據拖鏈類型預先選擇<br />
V高性價比，易於裝填的拖鏈，一片式，拉鏈式<br />
V極小，小及中型尺寸拖鏈，一片式和兩片式<br />
V防護電纜不受碎屑和污垢的影響 - 用於能量供應系統的拖管，兩片式<br />
V幾乎適用於所有應用的標準四片式拖鏈套件<br />
V低噪音，低磨損，無震動的三片式或六片式拖鏈<br />
V適用於3維和圓周運動的拖鏈，尤其適用於機器人應用<br />
V長行程拖鏈和特別應用的拖鏈解決方案。<br />
V浪管和軟管導向解決方案<br />
<br />
●用於移動供電的chainflex®<br />
用於移動供電的 chainflex® 耐彎曲電纜<br />
chainflex® 耐彎曲電纜是非訂製電纜，用於拖鏈中的運動應用或機器手臂應用，保證36個月無故障。 <br />
chainflex® 耐彎曲電纜符合EMC安全要求以及各種標準和準則，如UL、CSA、VDE、EAC、CTP、Interbus和Profibus。 c可採用多種護套材質。產品系列涵蓋了控制電纜、伺服電纜、馬達電纜、機器人電纜，以及總線電纜、數據電纜、編碼器電纜和光纖電纜。用於拖鏈的 chainflex® 耐彎曲電纜在長時間內完美運轉，承受眾多循環、高速和高加速度以及非常極端的環境條件。<br />
<br />
●訂製電纜 readycable®<br />
readycable® 全裝配電纜是適合在拖鏈中使用的易於連接的電纜。作為製造商和訂製廠商，igus® 從單一來源提供所有產品，從而減少生產時間和供應商的數量。產品組合包含廣泛的目錄產品系列，如根據製造商標準和不同工業標準訂製的電纜以及單獨或量產的部件。許多不同質量、不同類型、符合不同標準、不同認證的電纜可供選擇。所有部件都接受廣泛的品質檢查和功能測試。<br />
<br />
●組裝到好的 readychain®全裝配拖鏈<br />
客製的拖鏈系統:精簡從設計到組裝的流程<br />
我們即插即用的客製拖鏈可將採購選項、零件清單項目、聯絡人數量和安裝工作量降至最少。 這樣以避免不必要的倉儲空間和資源浪費。 它們創造出最佳的解決方案並增加加您的競爭優勢。 它們優化了拖鏈、電纜、接頭、空壓管、液壓管、金屬件、傳感器、PLC、軸承、線性滑軌裝置和其他機械零件的供應鏈。 <br />
拖鏈、電纜、模組化——以 igus® 的全裝配拖鏈優化流程！<br />
<br />
更多資訊: https://www.igus.com.tw/
RUN ACE CO., LTD.
Product Description :
The Bonfiglioli reducer combines many advantages such as extraordinary quality and extremely high cost efficiency. The product has a variety of mounting shaft configurations and motor interface options, and all options are standard, providing users with absolute flexibility. With many patented manufacturing technologies, Bonfiglioli products have ultra-long service life and reliability, and this product is the perfect partner for various motors.
CAMPRO PRECISION MACHINERY CO., LTD.
Product Description :
Campro presents the new NT series CNC lathe which is based on high quality cast iron for perfect stiffness and vibration characteristics. 30° cast iron inclined bed ensures quick chip evacuation. NT-208SM equips BMT Living Turret and C-axis control which enables machine to perform milling functions. Through synchronized control of 8” Main spindle / 6” Sub-spindle to complete the greatest amount of primary and secondary turning possible in one compact platform.
