Theme
Digital Transformation
Green Transformation
TAILIFT CO., LTD.
Product Description :
全新推出ES-27全電伺服轉塔式沖床，採用全電系列AC伺服數控系統，具有高速、節能、高精度與低噪音的特色，加上過負載自動保護設計，是沖壓高精密薄鈑件的利器。它的集成式組裝方式，有效減少地面安裝空間。因具有沖孔、成型、滾切與攻牙等多功性能，可減少無效率工時的等待，大大提升加工效率。
另外節能方面，平均耗電顯著降低，無液壓油的消耗，是環性保護需求的綠色產品，這也是機身基座採O型龍門式架構設計，經世界級頂尖實驗室使用結構有限元素分析後，完成機身機座各部結構之靜性結構分析、剛性結構分析、暫態分析等應力結構性資料。
在構造機身基座之材料上，選用高強度鋼材焊接，引進尖端熱處理技術，消除焊接產生的熱內應力，使機身金屬結構完成統一機身機座，在精加工前更再經過高張力測試、正常化處理與震
動應力消除等三道防線嚴格把關，使機身組裝精度維持一致性。
EQP SERIES CO., LTD
Product Description :
Voltage Sensitivity: 10mV/(m/s²)±10%
Power Supply: DC15～36V
Constant Current: 0.5～10mA
Resonant Frequency: Approximately 40kHz
Frequency Response: 5～10kHz (±3dB)
Maximum Acceleration: 220m/s²
Shock Resistance: 49,000m/s²
Noise Level: Below 100μVRMS
Operating Temperature Range: -50～110℃
Detection Structure: Shear Type
Case Material: Titanium
Mass: Approximately 10g
TAIWAN MACHINE TOOL CO., LTD.
Product Description :
TMT TG series with meticulous design, is your best choice in precision finishing. Multi-performance, while satisfy different machining demand. Work table can be mounted with APC, 5 Axes or fix table.
-High cutting rigidity with ganty type structure design.
-Compact design less floor occupation.
-Without carring ATC system on moving parts to make it lighter, make sure cutting without vibration.
- Cutting area isolation to ensure the transmission system life longer and easier to install linear scale.
-High efficiency servo drive ATC system, C-C(T1-T2)only 4sec., with high stable performance.
-ATC install at the center of basement to reduce the width of machine to save the walking steps to loading and unloading workpiece.
CloudRiches Digital Technology Co., Ltd
Product Description :
雲馥數位 開設企業級別的 Azure OpenAI Service 技術工作坊，提供更符合企業需求的Azure OpenAI 服務，並由解決方案顧問擔任講師，完整介紹 Azure OpenAI Service 和 Azure OpenAI Studio。參與者將透過實際操作，學習如何創建和優化各種情境的提示(Prompt)。同時，瞭解到如何將 Azure OpenAI 服務運用至公司內部實際場域。此外，工作坊也會從中提供最佳實踐案例，讓參與者探索新的解決方案、原型設計和部署方式。
KAO MING MACHINERY INDUSTRIAL CO., LTD.
Product Description :
1. 門寬2.1米以下，底座採用雙線軌設計；門寬2.3米以上底座採用三線軌設計，並具有硬軌之高剛性結構，Z軸行程可達850mm。<br />
<br />
2. 三軸均配備大型滾柱式線性導軌；剛性與速度兼顧。<br />
<br />
3. Y軸採用階梯式導軌設計，上軌與下軌段差225mm的特殊設計，使主軸頭不易前傾，同時分擔了部份Y軸失利於立柱的推力，使主軸頭在重切削負荷時，非常穩定；並以垂直方式偏置排列，確保最佳結構剛性。<br />
<br />
4. 主軸以直結式傳動，減少軸不對心引起的振動，提高切削性能與精度。<br />
<br />
5. 最佳主軸頭中心對稱式設計，減少熱變位影響，確保主軸精度。<br />
<br />
6. 利用有限元素分析(FEA)先進實務觀念，設計出最佳化底座立柱及橫樑等主要結構剛性。<br />
<br />
7. 三軸使用高精度並施以預壓及預拉之滾珠導螺桿；X軸採中空設計並通過冷卻油，且螺桿兩端之稱軸承外環，有空氣冷卻之特殊設計，減少熱變形，確保最佳之定位精度。<br />
<br />
8. Z軸油壓平衡配重；在Z軸上使用兩支油壓缸抵消主軸頭重量，確保加工時的穩定性。<br />
CHING HSYANG MACHINERY INDUSTRY CO., LTD
Product Description :
1.A circular tube modifies an interior angle and an external angle at one time with fastness and precision.
2. It's simple and fast to switch the knife because of easy to buy the insert disc in the market.
3. Two-stage of feeding knife, and the idle stroke is smooth. It's available for adjusting the operation stroke according to the cutting volume.
4. There are automatic and manual functions, which are convenient for adjusting the machine.
5. Special automatic positioning device, which can automatically position, feed and chamfer, and fine-tune the length tolerance.
6. Oil mist cooling and lubricating system promotes insert life, and no chips will stay.
7. There is a pause switch at the final point so as to assure the flat plane and the accurate right angle of the work piece.
8. The axle head with phosphor & copper bushing can prolong the life.
9. It can be option the lifting rack to use with this machine.
SESAME MOTOR CORP.
Product Description :
Sesame Motor has engaged in offering excellent quality planetary gearboxes, gearheads and gear reducers to our valuable clients for almost 30 years. Multiple designs, models, performance levels and customized motor brackets to offer different ranges of power transmission solutions. Precision gear design and processing incorporate one-piece planet gear carrier and output shaft to provide higher radial load, increased service life and low backlash.
Visit https://www.sesamemotor.com/products/en/
