Theme
Digital Transformation
Green Transformation
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
Product Description :
1. KGC and KGCP types are suitable for grease NLGI grades 000, 00 and 0.
2. Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir.
3. KGC and KGCP types are controlled by PLC (Programmable Logic Controller). It can work with CV type Progressive Feeders which can supply fixed volume of grease. CV type Progressive Feeders can assure each of lubrication point has equal amount of grease.
4. Pressure switch can be added on request for checking if the piping works normally. The standard setting is at 60 bars and the standard specification is NC (Normally Closed) contact, which means if the pressure doesn't reach the default setting, it sends continuous signals. NO (Normally Open) contact is available on request.
5. Magnet Level Switch is also an optional accessory that can be added upon request. It sends continuous signal automatically when the grease level is lower than the minimum level.
6. For the first time use, slightly press the Feed button (F button) to feed grease immediately. F button can be used as manually grease feeding for no more than 3 minutes.
7. AC110V and AC220V motors have thermal controls. When the motor temperature reaches 100℃, the sensor will be on to stop the motor continue running about 5 minutes.
8. It has a pressure gauge that the operator can check the pressure easily.
9. It can be used for the machines requiring strictly rationing grease flow. It usually works with rubber or plastic machines, press machines, machine centers, woodworking machines, etc.
CAPTAIN SCIENCE CORPORATION
Product Description :
Established in 1935 as a subsidiary of The Felters Company, originally working primarily in the shock/vibration field, UNISORB® has grown to be the leader in providing a full spectrum of advanced products and innovative engineering for the installation of a wide variety of capital equipment used in General Manufacturing, Metalworking, Testing and Verification, Printing, Power Generation, and a wide variety of other areas.
ICOP Technology Inc.
Product Description :
The QEC-M series is an EtherCAT master that uses a dual-core, independently operating DM&P Vortex86EX2 processor for real-time, reliable synchronous EtherCAT control. The master core of the processor serves as the Arduino development environment; the slave core of the processor serves as the Real-time EtherCAT master. The two cores exchange data via Inter-Processors Communications (IPC).
