Theme
Digital Transformation
Green Transformation
BORE AUTOMATION TECH. CO., LTD.
Product Description :
24V DC 16 Channels Relay Module, equipped with high qaulity OMRON G3DZ-DZ02P-DC24 SSR power relay, high quality WAGO PUSH-IN Type PCB terminal block, easy to replace pluggable relays, fully compatible with variety PLC /CNC controller, muti-functional protection , optimized installation effort
SONG GIA INDUSTRIAL CO., LTD.
Product Description :
【CROSS DRILLING/MILLING UNIT, 3-SPINDLE】
Speed ratio : 1:1
Maximum speed : 8000RPM
Tool clamping : ER11M
【DRILLING/MILLING UNIT FOR SUB SPINDLE】
Speed ratio : 1:1
Maximum speed : 8000RPM
Tool clamping : ER11
Machine :
33mm : SR-20R : STRB111203
36mm : SB-20R : STBB111201
47mm : SR-32J : STRB111301
YANMECH Industrial Co., Ltd.
Product Description :
【J Series：】
1. Adapter Plates can be selected.
2. Install side strips and chips cover sealed base jaw to prevent chips and coolant ingress.
3. The jaw can be individually operated, and irregularly shaped workpieces can be clamped.
4. Special specifications can be customized.
【L Series：】
1. Adapter Plates can be selected.
2. The jaw can be individually operated, and irregularly shaped workpieces can be clamped.
3. Special specifications can be customized.
Taiwan TeamA Tech. Co., Ltd.
Product Description :
Form 3L為 Formlabs 推出的大型光固化3D列印機，是一款成型空間達擁有達33.5*20*30cm的桌面級3D列印機，讓您的想像力不受限！採用最新專利研發的低應力光固化成型技術（LFS），擁有彈性樹脂槽與封閉式光學模組（LPU）等，大幅增加了機器的可靠與穩定性，精確度、平滑度及透度都大大增加，讓您的大物件也擁有精緻細節！搭配Form Wash L自動清洗機與Form Cure L溫控光固機，以磁力迴旋可一次清洗一個Form 3L平台或是兩個Form 3平台，並使用兩個500W加熱器與大功率紫外線燈全方位高度強化，發揮材料最佳性能！
Form 3L特色包含
1. 33.5*20*30cm 超大列印空間
2. 大型物件也有大大的細緻度
3. 彈性成型槽印大型實心物件也不怕
4. 專利LFS技術配合光學模組使透度平滑度大幅提升
5. 雙卡匣智能給料，安心列印不中斷
6. 高達20多種樹脂滿足外觀、功能驗證需求
7. 輕觸支撐材，好拆不麻煩
8. 繁體中文切片軟體PreForm超好用
YING HAN TECHNOLOGY CO., LTD.
Product Description :
5-AXIS VERTICAL MACHING CENTER BELONGS LINEAR WAYS ON THREE AXES, X, Y, Z -AXIS TRAVEL: 800x600x550mm, MEEHANITE CAST IRON IS TEMPERED FOR STRESS RELIEF TO ENSURE STRUCTURAL STABILITY WITHOUT DEFORMATION. REINFORCED COLUMN BASE GREATLY INCREASES STRUCTURAL STRENGTH AND WILL EXHIBIT ULTRA-HIGH STABILITY DURING HIGH SPEED OPERATION. WITH THE EQUIPMENT OF CNC TILTING ROTARY TABLE, THE MACHINE IS ABLE TO PERFORM 5-AXIS MACHINING, IT CAN MACHINE COMPLEX, MULTI-SIDED PARTS IN A SINGLE SETUP, THEREBY REDUCING SETUP TIME WHILE INCREASING PART ACCURACY.
DAH LIH MACHINERY INDUSTRY CO., LTD.
Product Description :
龍門型結構，高速加工極穩定。<br />
12,000 / 15,000 rpm高速直結式主軸。<br />
X, Y, Z軸全配置滾柱型線軌。<br />
X, Y, Z軸快速進給率30米/分。<br />
獨創主軸熱補償功能。<br />
立柱結構左右對稱，為最佳熱平衡設計。<br />
X軸獨立於床台上，Y軸獨立於立柱上，無重疊之負荷。<br />
工作台全行程支撐無懸垂，偏移問題，確保最佳加工精度。<br />
三軸滑軌配置線性滑軌，形成穩定順暢，並兼顧高速加工之需求。<br />
衝錘式主軸頭、開頂式護罩。<br />
滾珠螺桿中空冷卻。
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
Product Description :
1. CEN03 type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors. With CAB or CBB type volume distributor, oil will feed during operation time. With CDB or T type volume distributor, oil will feed during interval time.
2. The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil.
3. It has a spark-eliminator inside to prevent the sparks producing when the electric current is running. The spark-eliminator can avoid PLC (Programmable Logic Controller) being interfered.
4. CEN03 type has a pressure switch device and been set up as 8kg/cm2, which assures the oil volume of lubrication point and check if the piping works normally. The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have signal. NO (Normal Open) contact is available on request.
5. It has a float switch that can detect the oil volume. When oil is lower than the minimum level, the float switch will automatically send a continuous signal.
6. It has a pressure gauge where an operator can check the pressure easily.
7. Do not press the force feed-oil (F button) more than three minutes in order to avoid overloading. When the temperature reaches 100℃, the sensor will be on to stop the motor continuing running about 5 minutes.
8. It can be used for the machines requiring strictly rationing oil flow. It is usually used for such as processing machines or projecting machines.
