Theme
Digital Transformation
Green Transformation
SHEN SHAN INTERNATIONAL GLIDE MFG. CORP.
Product Description :
Twin caster can be assembled plate, stem with ring, stem, screw
E-TECH MACHINERY INC.
Product Description :
EGP-2520CNC is a high-efficiency cylindrical grinding machine with ultimate reduction in footprint. With a floor space requirement of less than 1.8m2 and 500mm diameter grinding wheel, it is suitable for small workpieces machining. Distance between center is designed to be 200mm, the center height is 125mm, and the maximum weight of workpiece can be processed is 5 kilogram.
VISION WIDE TECH CO., LTD.
Product Description :
One of the proudest products of Vision Wide which fulfills automatic 5-face machining with super rigidity structure and high positioning accuracy. HF satisfies demands in mold surface cutting, angle cutting, 3D mold cutting, and precise contour finishing.
PEI CHIANG MACHINERY CO., LTD.
Product Description :
S系列經濟型 產品特色:
● 半油性切削液專用
針對水性切削液設計之HEPA濾材，有效過濾水霧懸浮微粒
● 高效淨化有毒物氣
再過濾油霧回收機餘氣、PM2.5懸浮微粒60%，配合二段式高壓油霧回收機，整體過濾效能達95%
油霧回收機本體特色 :
●機體材質鋁合金成型，重量輕，堅固耐用
●強力高風壓，最大可達320mmAq流量流速穩，過濾效能高
●使用感應式馬達，電量省 散熱快 適合長時間運轉
●結構式原理回收油霧，直立式設計，不震動，低噪音
●安裝容易，不佔空間，使廠內機械移位佈置更容易
●捨棄式濾網，10秒快速更換，保養容易，工安無慮
分離式油煙處理座特色
●標配之壓力錶：可輕易檢知是否有阻塞的情況 、 判斷濾材更換時間
●專利結構設計：由上往下之設計原理，以高風壓加速濾材所吸附的油氣集結快速垂降， 使壽命有效延長
●分離式之設計：因應現場需求，可直接安裝於機台上方或任意位置
●彈性多功組合：可單獨選購或配合任何有動力送風之末端空氣處理
● 免保養易更換：濾材無需保養，分離式之設計使濾材更換更加容易
適用範圍:
CNC車床、CNC铣床、CNC綜合切削加工機、CNC磨床、放電加工機、滾齒機、洗淨槽、防鏽油噴霧回收及會產生
白煙、細油氣、水霧、油霧之各種設備的回收淨化處理。
選配項目:
● 活性碳AC-650 ● 油煙處理器S-350 ●油煙處理器SH-650 ●側掛鐵架 ●直列式四腳架 ●並列式四腳架
NINE-9 CUTTING TOOLS CO., LTD.
Product Description :
NC Helix Drill cuts material by helical interpolation; serrated cutting edge minimizes chip length.
Low spindle power is not a problem, good for drilling material that generates long, soft chips.
● Reduce Your Tool Inventory
Each holder can machine di erent diameters and hole depths, saving your tool inventory and cost!
No need to peck drill or dwell in operation even machine without internal coolant.
● Lower spindle power consumption Easy to cut!
• Thanks to the small cutting load of the serrated cutting edge and helical interpolation lower power consumption. Work quicker, smarter and achieve better results.
• Circular ramping milling, maximum ramping angle is 20°. For example: tool HD27 machining Ø50 mm hole, 9 mm pitch for aluminum, 6 mm pitch for carbon steel.
● Special insert geometry - exceptional swarfs control.
• Serrated cutting edge makes the chips short and small, and easier to evacuate.
• Eliminate swarf and vibration problems while drilling di cult material or deeper holes.
● “One tool” performs multiple applications
• Not only a drill, but an end mill too.
• Small radius path to cut a hole or step hole, various curved cavity shapes on di erent materials.
ASIA PACIFIC ELITE CORP.
Product Description :
G800T,a single machine completes all cutting processing.
The APEC 5-axis mill-turn machining center G800T is built with a vertical structure to tackle the limitations faced by traditional lathe machining. After turning, it seamlessly transitions into milling without having to move the workpiece, cutting down on time and human errors. This means you can complete the job in one go without switching processes, leading to a more efficient and modern machining experience.
HYDROKOMP GmbH
Product Description :
Coupling elements of HYDROKOMP are made of stainless materials. This enables the elements to be used for all fluids and gases that are not aggressive. Special designs eg. for water steam or other media are available on request. HYDROKOMP offers coupling elements for two different operating modes depressurized coupling or pressurized coupling. The elements for depressurized coupling can be coupled pressurized up to 25 bar, if the specified volume flow is not be exceeded. When using higher operating pressure there ockures a risk of demaging the soft seal in the check valve as the result of high flow velocities of the fluid. This means for coupling of air up to 10 bar there should be always used the coupling elements for depressurized coupling. This also applies when the coupling process is initiated pressurized. The elements which can be coupled pressurized may be coupled up to the maximum specified operating pressure on one side and / or on both sides.
ZHAO YI HSIN INDUSTRIAL CO., LTD.
Product Description :
Providing clean compressed air without energy consumption
No power required
Applying characteristics of compressed air, hydromechanics and physical principles to design internal structure.
Consumable-free, maintenance-free
Exclusive patented structural design can separate moisture from compressed air without consumables.
Efficiency of air drying and moisture filtration: 99%
Patented high efficiency water-cooled heat exchanger and special air-water separation structure.
High quality, durable, and longevity up to 10 years
No compromise on quality, the product is made in Taiwan.
No electronic and other energy-driven device
Suitable for those who have special needs for compressed air.
LEEKA INDUSTRIAL CO., LTD.
Product Description :
LEEKA produce hardware handles including flush door pulls, industrial handles and chest handles.
We can customize the special size for you. If you have any question, please feel free to contact us.
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
Clamptek’s CLF5H series designed with connecting rod structure which can operate conveniently. CLF5H series can also reduce the interference with loading and unloading operation, because when CLF5H series is in the unclamping state, it’s clamping arm can be put lower than holding position.
Clamptek’s CLF5H series’ clamping arm is very flexible. By reducing the interference of the surrounding equipment, CLF5H series can save lots of working space.
Clamptek’s CLF5H series equipped with special dust proof design and high sealing, which can prevent the cutting chips and coolant to infiltration. Therefore, CLF5H series can be used in more severe conditions.
Please kindly check the suggested operating pressure as below,
Max. operating pressure: 70 kgf/cm2
Min. operating pressure: 10 kgf/cm2
YINSH PRECISION INDUSTRIAL CO., LTD.
Product Description :
YINSH PRECISION IND . CO ., LTD . specializes in the production of superfine balanced locknuts for high speed machine tool spindles. SBL series is designed for all configurations of internal and direct drive spindles. Inner threads, outer skirts, clamping and trailing rims are all precision ground. Coupled with balanced adjustment screws, these locknuts stay perfectly balanced at high speeds. Made of high grade SCM440 alloy steel and hardened to HRC 48°-52°, rigidity and precision at high speeds is given. All locknuts can be fitted with adjustment screw hole screw-in plugs(option), eliminating high frequency noise and subsequent vibration.
