Theme
Digital Transformation
Green Transformation
YOKE INDUSTRIAL CORP
Product Description :
1. Size from M8 to M48 to fulfill your demand
(M8 ※ 0.3t _ M64 ※ 12t)
2. Design Factor 4:1, Working load limit could be up to 32 tons
3. Lifting point is made by forged alloy steel, quenched and tempered
4. 360 degrees rotation to avoid traditional eye bolt bending.
5. Light weight, High Performance, easily for using
Deliver with test certification to guarantee your safety
RENISHAW (TAIWAN) INC.
Product Description :
NC4 - 不是只有刀具設定！<br />
<br />
Renishaw 的 NC4 將更快速且更精確的刀具設定優勢附加在製程中且更容易理解。進行加工製程時，尺寸精度取決於變數，包括刀具尺寸偏差、刀具/刀把偏擺與刀具破損。<br />
<br />
Renishaw NC4 非接觸式刀具設定可以：<br />
<br />
• 補償加工製程中出現的誤差<br />
• 自動更新加工機控制器，以補償實際影響，例如刀具磨損<br />
• 於檢測出刀具破損時自動停止製程<br />
• 減少重工、製程妥協及廢品
JASON AUTOMATION CO., LTD.
Product Description :
WRE(E) direct operated proportional directional control with integral feedback are available with or without on-board electronics (OBE). Positive overlap spools reduce leakage at center, while underlap spools can be utilized for closed-loop functions. Individual amplifiers are available, while OBE models are possible with either a voltage or current command.
TAIWAN MORE-CASH VILLAGE CORP.
Product Description :
For 34.1mm-52mm Twist Drill Re-sharpening , Angle 118°-140°
Precise Grinding Results , Precision Assurance within 0.1mm
Easy to Operate , grinding a drill within 10 seconds.
Special Design High Accuracy Alloy Steel Collets
Accurate Grinding consumption 0.2mm
High Efficiency DC motor
Stable Quality Grinding Wheel
Considerable Design, Invisible Tool Box, Delicate & Friendly Use
HC FENG CO., LTD.
Product Description :
4 in 1 Coolant Purification System
1. Filtering floating debris and dirty particles
2. Oil/Water Separation, removes tramp oil down to 5% water content
3. Ozone Disinfection, eliminates bacteria and cleaned fluid backflow
4. Automatic control panel and pH detect device
BLUM PRODUCTION METROLOGY CO., LTD.
Product Description :
– THOUSANDS OF MEASURING VALUES OF ALL TOOL CUTTING EDGES PER SECOND
– UP TO 60% LESS MEASURING AND CHECKING TIME
– MEASUREMENT AND MONITORING OF ALL KINDS OF TOOLS, TOOL FORMS AND CUTTING MATERIALS
– COMPENSATION OF SPINDLE DRIFT AND TOOL CUTTING EDGE RUN-OUT ERRORS
