Theme
Digital Transformation
Green Transformation
HYDROKOMP GmbH
Product Description :
Coupling elements of HYDROKOMP are made of stainless materials. This enables the elements to be used for all fluids and gases that are not aggressive. Special designs eg. for water steam or other media are available on request. HYDROKOMP offers coupling elements for two different operating modes depressurized coupling or pressurized coupling. The elements for depressurized coupling can be coupled pressurized up to 25 bar, if the specified volume flow is not be exceeded. When using higher operating pressure there ockures a risk of demaging the soft seal in the check valve as the result of high flow velocities of the fluid. This means for coupling of air up to 10 bar there should be always used the coupling elements for depressurized coupling. This also applies when the coupling process is initiated pressurized. The elements which can be coupled pressurized may be coupled up to the maximum specified operating pressure on one side and / or on both sides.
SAFEWAY MACHINERY INDUSTRY CORPORATION
Product Description :
1. Large through hole design.
2. Drive by dual-lead worm. Exceptional high-tensile brass.
3. Disc brake capacity.: Maintain high torque for consistent usage.
4. Crossed Roller Bearing : High Rigidity.
5. Brake signal : 2 pieces of pressure switch ( made in Germany )
6. Solenoid Vales ; SMC ( made in Japan )
7. Copper worm gear : Made in Japan .
8. Highest quality of all components .
G-TECH INSTRUMENTS INC.
Product Description :
A rotor that does not perform dynamic balance correction may produce unnecessary vibrations and thus reduce the productivity of the machine, as well as damage to the bearings. At the same time, it may cause damage to the outer frame or supporting device and foundation during severe movement.
G-Tech HJ-4250S-A Hard Bearing Balancing Machine is applicable for tool machine spindles, high-speed built-in spindles, motor rotors / motors, rollers, fans, centerless grinding wheels.
A maximum rotor weight of 500kg, a maximum rotor diameter of 1 meter, and measurement accuracy at low speed dynamic balance is 0.5gram-mm(max), and the can be 0.05gram-mm(max) at high-speed dynamic balance.
EUMACH CO., LTD.
Product Description :
HSM-5X系列是最新的機器與萬能的應用，完美回應數控五軸加工與工件的定位與刀具軸空間要求，為複雜零件的加工提供了廣闊的應用範圍。
本機採用C型架構，機床為高剛性完全支撐結構，機械經久使用，能長時間維持穩定狀態，旋轉銑頭B軸與旋轉工作臺C軸為獨立分開無重迭之兩旋轉軸，便利於工件、刀具及夾制具等設計及擺放，尤其相互干涉現象較旋轉兩軸重迭之銑頭或工作臺大幅減少。並可選用車銑主軸及高速旋轉工作台，達到車銑複合綜合加工。
HSM-5XC是大型高效切割和加工應用的最佳解決方案，無論您的重點是靈活的單元生產還是大批量精密製造，如航空工業的渦輪葉輪，葉盤等，或醫療的心臟瓣膜，人工關節或牙齒等，當然，一般加工，如模具加工或僅5面或多面加工都非常容易！
本機採用實的米漢娜鑄鐵結構，三軸為重型滾柱直線導軌進給系統，能很短時間內加速到48m/min，三軸行程1020/610/610mm，力矩電機驅動B軸連續擺動銑頭0.001角度分割，旋轉範圍-30~120ﾟ，裝進口電機主軸26&32Kw / 124&154Nm / 18000RPM/HSK-A63設計及標準長工作台崁入φ610mm由力矩電機驅動的旋轉工作臺(C軸)，最大轉速50RPM承重500KG，搭配HEIDENHAIN TNC640，15”螢幕的五軸連動控制器，HEIDENHAIN高精度三軸光學尺，刀臂式60把刀，該加工中心用於多面高性能加工和最智能的加工概念提高了生產力。
