Theme
Digital Transformation
Green Transformation
MAHO ENTERPRISE CO., LTD.
Product Description :
Pneumatic tapping machine is suitable for different size taps (from M2 to M27). The arm is equipped with lubricated for life bearings at all swivel points, provides weightless operation through the use of gas counter balance springs and permits the operator to bring the tap to the hole with ease.
HONG JI PRECISION MACHINERY LTD.
Product Description :
This machine is applied to deep hole reaming to reach high accuracy in hole roundness. It is suitable for reaming center holes of gun barrels and long shafts.
TSYR TZUN INDUSTRIAL CO., LTD.
Product Description :
PRODUCT FEATURES
With circuit protection of breaking for motor, once any wire of three phases power source is broken off, this unit could cut off current to motor to prevent motor from being burn out.
Drill sleeves、tapping adaptors and borer holder are with rapid adaptors, very convenient for replacement of cutters.
Tapping adaptors with torsion control, tap bits are protected from being twisted off.
The rotation speed of the MTM-930A can be changed quickly during running.
It's very convenient for the operator, and the efficiency is increased accordingly.
SHENG YU PRECISION MACHINE CO., LTD.
Product Description :
The general-purpose two-way horizontal CNC drilling and tapping machine can be combined with various industries to provide the best processing solution for multi-axis machine tools to improve efficiency and reduce costs. It is a processing tool that belongs to you.
XIN GONG YANG MACHINERY CO., LTD.
Product Description :
◎Spindle Taper：ISO-50
◎Outside Diameter of Flange：Ø250 / Ø300
◎Max. Speed：800RPM / 2000RPM
◎Can be opposite-side milling, no need to correct the accuracy again.
◎Spindle water repellent.
SHARP ONE CO., LTD.
Product Description :
M26AB is of good quality and meets market needs. It solves the
incomplete design of the traditional end mill grinding machine on the
original market. Compared to other brands, M26AB features are as
follows.
Single piece grinding wheel can grind different end gash, first to none.
It can grind variable index and spiral.
Positioning is visible. Grinding intensive and powerful blades is
adjustable.
Grinding carbide flat drill bit.
Grinding chip flutes positive angles.
Standard vacuum can decrease chips spreading, good for health and
machine.
M26AB multi-function machine greatly reduces the cost of end mills
and increases the efficiency. It is the first end mill grinding machine with
standardized positioning, standardized & friendly operation, and multifunction
on the market. These advantages attract users to test our
machines and prove that M-26-AB can help their daily work.
Taiwan Auto-Design Co.
Product Description :
// SolidMEN-300的優點
✅ 材料: 不綁材料僅建議合格廠商,未來可自行選用適合材料
✨ 雷射: 德國 500W 水冷式雷射穩定性佳
⚡ 層厚: 層厚可控範圍 10~100μm (最小進給單位 10μm)
🛠️ 成品: 可列印多種金屬材料,強度超過鑄造,可作為表面後處理及拋光使用
🔬 研發: 不綁參數開放製程研究,未來材料無受限可自行開發
⬆️ 尺寸: 300x300x300 可製作大尺寸工件,另有機型可增大或縮小
💎 緻密度>99.5%,品質優於鑄造,近似鍛造
🤖 搭配遠端資訊與智能化視覺模組,方便製程穩定性及智慧化整合。
(即時錄影、列印層數/高度、雷射功率、粉未剩餘量、腔體含氧量、製程時間等)
SHARP ONE CO., LTD.
Product Description :
摩特立「複合多功能鑽頭研磨機」創新設計~
刀具定位看得見，可作標準化、節省成本效率高，鑽頭研磨後精度高且壽命長，一機可磨多種刀型。
榮獲2020台灣精品獎肯定，也是第一家獲得國家發明創作銀牌獎的桌上型鑽頭研磨機廠。
XIN GONG YANG MACHINERY CO., LTD.
Product Description :
◎Spindle Motor：Permanent Magnet Synchronous Motor22W(30HP)
◎Max. Diameter of Cutter：Ø300
◎Feed Travel：500mm
◎Speed Change Method：Manual/12 Section
XIN GONG YANG MACHINERY CO., LTD.
Product Description :
◎Spindle Taper：ISO 50
◎Outside Diameter of Flange：Ø250 / Ø300
◎Max. Speed：3000RPM
◎Applicable work:
0~800RPM-light cutting；
800~3000RPM-finish milling
MAHO ENTERPRISE CO., LTD.
Product Description :
Hydraulic tapping machine is suitable for different size taps (from M4 to M50). The machine is equipped with hydraulic pump system for controlling the spindle to tap. The arm is equipped with lubricated for life bearings at all swivel points, provides weightless operation through the use of gas counter balance springs and permits the operator to bring the tap to the hole with ease.
