Theme
Digital Transformation
Green Transformation
TSYR TZUN INDUSTRIAL CO., LTD.
Product Description :
1.With circuit protection of breaking for motor, once any wire of three phases power source is broken off, this unit could cut off current to motor to prevent motor from being burn out.
2. Drill sleeves、tapping adaptors and borer holder are with rapid adaptors, very convenient for replacement of cutters.
3.Tapping adaptors with torsion control, tap bits are protected from being twisted off.
4.MTM-932ADL comes with drilling force control unit for Auto-feeding:
When drill bit is worn out, this unit will drive feeding intermittently or stop feeding.
Once feeding becomes difficult while making a hole, Please replace a new drill bit or re-sharpen the worn out one in order to protect both drilling tool and machine body from being damaged.
5. MTM-932ADL comes with three intermittent breaking rates for breaking chips :
Choose different feeding rates according to different drill bits and material to perform Auto-feeding operation.
This device can break chips intermittently and discharge them while Auto-feeding is processing, so that chips would not roll on drill bit. Easier to discharge chips.
6. MTM-932ADL comes with three feeding rates for Auto-feeding:
Feeding rates are separately 0, 0.15 and 0.25, please choose suitable rate according to size of drill bit and material of work-piece for drilling.
7. The rotation speed of the MTM-932ADL can be changed quickly during running.
It's very convenient for the operator, and the efficiency is increased accordingly.
MAHO ENTERPRISE CO., LTD.
Product Description :
Hydraulic tapping machine is suitable for different size taps (from M4 to M50). The machine is equipped with hydraulic pump system for controlling the spindle to tap. The arm is equipped with lubricated for life bearings at all swivel points, provides weightless operation through the use of gas counter balance springs and permits the operator to bring the tap to the hole with ease.
MAHO ENTERPRISE CO., LTD.
Product Description :
Electric tapping machine is suitable for different size taps (from M3 to M24). The machine is equipped with brushless DC motor and driver for controlling the spindle to tap. The arm is equipped with lubricated for life bearings at all swivel points, provides weightless operation through the use of gas counter balance springs and permits the operator to bring the tap to the hole with ease.
YATAGHAN ENTERPRISE CO., LTD.
Product Description :
Miracle Diamond Files are electroplated with high quality diamond powders in an unique technology.
Excellent cutting performance and extraordinary durability make your processing work more efficiently and smoothly than ever.
We provide all kinds of high quality Diamond Files available on the market at competitive prices.
YOUN JIN ENTERPRISE CO., LTD.
Product Description :
End Mill cutting & grinding Machine YCE-616
GRINDING RANCE 6~16 MM
Taiwan Auto-Design Co.
Product Description :
// SolidMEN-300的優點
✅ 材料: 不綁材料僅建議合格廠商,未來可自行選用適合材料
✨ 雷射: 德國 500W 水冷式雷射穩定性佳
⚡ 層厚: 層厚可控範圍 10~100μm (最小進給單位 10μm)
🛠️ 成品: 可列印多種金屬材料,強度超過鑄造,可作為表面後處理及拋光使用
🔬 研發: 不綁參數開放製程研究,未來材料無受限可自行開發
⬆️ 尺寸: 300x300x300 可製作大尺寸工件,另有機型可增大或縮小
💎 緻密度>99.5%,品質優於鑄造,近似鍛造
🤖 搭配遠端資訊與智能化視覺模組,方便製程穩定性及智慧化整合。
(即時錄影、列印層數/高度、雷射功率、粉未剩餘量、腔體含氧量、製程時間等)
RICH SOU TECHNOLOGY CO., LTD.
Product Description :
This machine is an improved model from the Y Rail model, featuring similar functions.
Designed standard with 4-station hanger with two side doors on blasting chamber. To meet your specific production line requirements, additional hangers are available for the entire working environment. Contact us for further details.
Features:
1.The machine employs a PLC controller for continuous cycles of blasting operation.
2.The cycle motions are: the hanging shaft enters the blasting chamber, and then moves to a fixed position at a lower speed. The door closes automatically.
Once the door is closed, the blade starts running automatically, and the machine performs blasting. Once operation is accomplished, steel balls are supplied and the blade stops automatically.
When the blade comes to a complete stop, the door opens automatically. When the door opens to the fixed position, the chain conveyor quickly delivers the nest hanging rod into the blasting chamber, then moves forward at a lower speed to a fixed position.
The door closes automatically and performs the nest cycle of blasting operation.
Dah Young Vacuum Equipment Co., Ltd.
Product Description :
DLC coating has the characteristics of high hardness, low friction coefficient, high density, wear resistance and corrosion resistance. The coating can be deposited at low temperature, so it is widely used in cutting tool, drill, automobile friction parts , decorative coating (such as watch and smart phone case), mechanical parts, various molds and other products.
Dah Young's hard coating equipment has a unique chamber design and power configuration. According to customer needs, we can provide target position design.It can also be equipped with a magnetic filter tube. The serial connection of the magnetic filter tubes in front of each arc target can be adjusted according to process needs, so as to increase the target ionization rate, reduce target particle adhesion, reduce production costs, and improve coating quality.
Please refer to：https://zh-tw.dahyoung.com/
XIN GONG YANG MACHINERY CO., LTD.
Product Description :
◎Spindle Taper：ISO 50
◎Outside Diameter of Flange：Ø250 / Ø300
◎Max. Speed：3000RPM
◎Applicable work:
0~800RPM-light cutting；
800~3000RPM-finish milling
JEFFER MACHINERY CO., LTD.
Product Description :
ASG-800 is an Automatic Carbide Saw Grinder. Original design idea and goal is by the user-friendly, clear operation panel, the PLC numerical control and stores up huge tooth patterns inside it. The machine could grind different kinds of TCT saw blades and can store up common tooth patterns up to 100 groups. It has automatic compensation program to set up grinding wheel compensation. It also can adjust grinding speed and has automatic lubrication system. This is a multi-purpose Automatic Carbide Saw Grinder.
ASG-800 Feature :
1. Using Servo dividing on grinding wheel angle is fast
with high accuracy.
2. It can adjust high and low speed on grinding wheel up
and down movement, which can save working time.
3. Servo used on fixing position for pushing tooth with
precise and fast orientation.
4. With automatically right-left moving on grinding wheel
while working, this can reduce grinding noise and can
sharpen knives well.
5. Grinding capacity : dia.120~800
Saw blade bore diameter: dia. 10~85
EANG LIAN CORPORATION
Product Description :
Professional Abrasive Brushes-Specifically designed for mechanical finishing tasks .
Specifically designed for mechanical finishing tasks .
That can be used in both conditions: dry grinding or wet grinding;
ideal for deburring parts in which the burred edges are in the same plane. Such as: deburring, sharp edge removal, radiusing,
edge contouring, de-fuzzing .
