Theme
Digital Transformation
Green Transformation
RINGTECH INSTRUMENTS CO., LTD.
Product Description :
IFP vacuum cleaning machine can effectively clean any size and structure of complex metal products, great for either large or small amount of cleaning, it is also the best vacuum cleaning machine available for environmental protection and energy-saving! The cleaning cycle is carried out in a complete vacuum environment that the working environment is clean and odourless. During operation, the user can select different options from spray, rotate, ultrasonic, rinse...etc. based on the workpiece. With the cutting edge iFP cleaning technology, overcoming difficult cleaning situations such as cleaning blind holes, slits can be effortless. After cleaning, the chips and residual cutting oil will be separated from the cleaned workpiece, the chips are fully dried and can be collected from the filter; the residual cutting oil will also be separated from water and could be recycled and reused.
Facing the new industry trend and the new future, IFP cleaning machine is your best cleaning choice!
Taiwan Auto-Design Co.
Product Description :
// SolidMEN-300的優點
✅ 材料: 不綁材料僅建議合格廠商,未來可自行選用適合材料
✨ 雷射: 德國 500W 水冷式雷射穩定性佳
⚡ 層厚: 層厚可控範圍 10~100μm (最小進給單位 10μm)
🛠️ 成品: 可列印多種金屬材料,強度超過鑄造,可作為表面後處理及拋光使用
🔬 研發: 不綁參數開放製程研究,未來材料無受限可自行開發
⬆️ 尺寸: 300x300x300 可製作大尺寸工件,另有機型可增大或縮小
💎 緻密度>99.5%,品質優於鑄造,近似鍛造
🤖 搭配遠端資訊與智能化視覺模組,方便製程穩定性及智慧化整合。
(即時錄影、列印層數/高度、雷射功率、粉未剩餘量、腔體含氧量、製程時間等)
TSYR TZUN INDUSTRIAL CO., LTD.
Product Description :
1.With circuit protection of breaking for motor, once any wire of three phases power source is broken off, this unit could cut off current to motor to prevent motor from being burn out.
2. Drill sleeves、tapping adaptors and borer holder are with rapid adaptors, very convenient for replacement of cutters.
3.Tapping adaptors with torsion control, tap bits are protected from being twisted off.
4.MTM-932ADL comes with drilling force control unit for Auto-feeding:
When drill bit is worn out, this unit will drive feeding intermittently or stop feeding.
Once feeding becomes difficult while making a hole, Please replace a new drill bit or re-sharpen the worn out one in order to protect both drilling tool and machine body from being damaged.
5. MTM-932ADL comes with three intermittent breaking rates for breaking chips :
Choose different feeding rates according to different drill bits and material to perform Auto-feeding operation.
This device can break chips intermittently and discharge them while Auto-feeding is processing, so that chips would not roll on drill bit. Easier to discharge chips.
6. MTM-932ADL comes with three feeding rates for Auto-feeding:
Feeding rates are separately 0, 0.15 and 0.25, please choose suitable rate according to size of drill bit and material of work-piece for drilling.
7. The rotation speed of the MTM-932ADL can be changed quickly during running.
It's very convenient for the operator, and the efficiency is increased accordingly.
EANG LIAN CORPORATION
Product Description :
刷、磨、拋、洗<br />
專業化的設計能力<br />
多樣化的線材應用<br />
客制化的生產系統<br />
提供客戶製程製品-刷、磨、拋、洗.全方位的解決方案<br />
瑩聯股份有限公司—主要供應各式工業用刷是工業用刷之專業設計製造廠、擁有自有品牌（優利牌），產品適用於各行各業。無論需要刷洗、精細研磨、拋光、輕研磨、重研磨、毛邊去除、深孔加工皆有顯著效果!<br />
<br />
主要產品：<br />
1.動力輪刷系列適用於各型電動及汽動工具.<br />
2.矽砂尼龍研磨刷系列可針對各種表面精細研磨.<br />
3.輪軸刷及板槽刷系列接受各種線材及特殊尺寸訂製<br />
4.鋼鐵業退火酸洗、脫脂清洗、刷磨、清洗等大型刷輥<br />
5.德國技術合作專業生產高科技合成纖維輥適-用於鋼鐵軋片產線之刮油輥、塗油輥、擠水輥、張力輥、轉向輥、擠油輥、擠乾輥、擠壓輥、擠水輥、不織布擠水 輥。 6.各種線材及特殊尺寸可依照客戶需要量身訂製
JEFFER MACHINERY CO., LTD.
Product Description :
ASG-800 is an Automatic Carbide Saw Grinder. Original design idea and goal is by the user-friendly, clear operation panel, the PLC numerical control and stores up huge tooth patterns inside it. The machine could grind different kinds of TCT saw blades and can store up common tooth patterns up to 100 groups. It has automatic compensation program to set up grinding wheel compensation. It also can adjust grinding speed and has automatic lubrication system. This is a multi-purpose Automatic Carbide Saw Grinder.
ASG-800 Feature :
1. Using Servo dividing on grinding wheel angle is fast
with high accuracy.
2. It can adjust high and low speed on grinding wheel up
and down movement, which can save working time.
3. Servo used on fixing position for pushing tooth with
precise and fast orientation.
4. With automatically right-left moving on grinding wheel
while working, this can reduce grinding noise and can
sharpen knives well.
5. Grinding capacity : dia.120~800
Saw blade bore diameter: dia. 10~85
YING HAN TECHNOLOGY CO., LTD.
Product Description :
■The specially designed software allows the operator to design the desired graphs on characters with ease, then machining can be conducted immediately.
■The automatic height adjustment function enables the focal length to be maintained at a constant status, thus ensuring the consistency of cutting quality.
■Small heating area on the workpiece eliminates workpiece deformation problems.
■This machine is equipped with a constant temperature water chiller, enabling the machine to withstand long time continuous running with stable performance.
■The enclosed splash guard can prevent damage to personnel due to the strong laser light.
■The shortest cutting tail is ≥0 mm.
RICH SOU TECHNOLOGY CO., LTD.
Product Description :
1. Automatic separating the parts and blasting abrasive, reduce the blasting time.
2. Equipped with air flushing dust collector, which automatically separate the dust. Correspond with the environment protection test and avoiding pollution problem.
3. Diagonal type blasting method. The operator can work and check the parts directly, which can avoid the parts missing.
4. Simulating the blasting angel and intersect blasting by CAE computer in order to achieve the surface blasting action more efficiently.
5. Suitable for bicycle and auto mobile parts, blasting efficiency increase and reduce the producing cost.
HOLDING ELECTRIC CO., LTD.
Product Description :
Holding Magnetic tools honing edge machines can achieve the following effects in a short time.
1. Trim the chipped and sawn edges to remove burrs and burrs.
2. Achieving consistent rounding processing, making the blade smooth, smooth, and sharp, durable.
3. Improve the surface finish and surface roughness of the workpiece.
4. Increase tool life and reduce the probability of chipping. The measured value can increase the tool life by up to 65%.
JAR HON MACHINERY CO., LTD.
Product Description :
1.Both cutting TAP and forming TAP are suitable.
2.Fully automatic tapping process. One operator can easily operate several machines at the same time.
3.By using proper master pitch gears(change gears A and B pair), highly accurate thread can be tapped. It is easy and quick to change different size.
4.The length of the tapping stroke can easily be adjusted for high accuracy which is suitable for tapping blind hole parts.
5.It has safe device to monitor the feeding, torque, radial, and clamping to keep TAP's long life and ensure safe working job.
6.It governed by PLC.
7.Long parts or those can't feed in vertical position are suitable.
8.Pre-work parts auto-checking and machine auto-stop if abnormal.
