Theme
Digital Transformation
Green Transformation
YEONG CHIN MACHINERY INDUSTRIES CO., LTD.
Product Description :
￭ Robust roller linear guideways applied on 3 axes.
￭ Rigid dual-wall castings on saddle and 6 blocks design on X-axis can easily support workpieces weighing up to 1,500 kg.
￭ 4-linear guideways on Y-axis with superior large span ensures the best dynamic balance.
HAWE Hydraulik Singapore Pte. Ltd. Taiwan Branch
Product Description :
Directional seated valves are a type of directional valve. As cone valves they are tightly sealed, with zero leakage in the closed state.
The directional seated valve type ROLV is available as a 3/2, 4/2 or 4/3-way directional seated valve with different plug types. The patented assembly consists of two parts: a round basic valve with the valve inserts, and an adapter plate which can be designed for manifold mounting with nominal size NG 6 as the
standard connection pattern, or for direct pipe connection.
Additional elements such as a check valve, a restrictor (on the consumer side) and/ or restrictor check valves can be integrated, depending on the functional requirement and adapter plate. The type ROLV can be combined in the valve bank type BA with other types of valves.
Features and benefits
■ Dirt-resistant design with high switching reliability
■ Interchangeable solenoid for greater flexibility and easy servicing
Intended applications
■ Machine tools (cutting and non-cutting)
■ Clamping tools, punching tools, fixtures
■ Testing machinery
■ Wind turbines
PINNACLE MACHINE TOOL CO., LTD.
Product Description :
2台立式 + 車床? <br />
立式+4軸轉台 + 車床?<br />
5軸機 + 車床?<br />
還在為複雜的工件煩惱買什麼機台嗎? <br />
BX700T絕對是最佳首選! Milling and Turning 銑車複合的五軸加工中心，B軸擺頭+/-120度，搭配內藏式15000轉主軸，內坎式C軸直徑630mm工作台，C軸轉速有800轉及1200轉作選擇。。專利設計，完美結合:最大的加工空間、最小的干涉、高精度及高效率的五軸銑車複合機。一台抵三台，投資成本相對少，佔地空間小。<br />
WELE MECHATRONIC CO., LTD.
Product Description :
1.立車主軸轉盤以進口交叉滾子軸承設計，確保重負荷的能力及長期的精度壽命。
2. Z軸226 mm方型滑枕搪孔軸採硬軌配Turcite B結構，VTC1612-CW標準行程900mm。
3.底座、立柱、橫樑、工作台等大型鑄件依製造需要，經由最新的3D設計，剛性最佳化，並以
多年經驗訂定有效的退火程序以消除殘餘應力，多年實際應用經驗，確實能達成有效的長期精
度保持性。
4.X、Z軸標準配備採用「雙編碼器」的「雙」半閉環回饋系統，經濟有效的提高各軸的定位精度。
(X、Z軸可選購德國Heidenhain或西班牙FAGOR光學尺)。
5.VTC-CW標準刀庫容量為16P(16儲位)，車刀型式及分配數目可依客戶要求處理。
6.主軸箱等關鍵零件係利用自有的「大型臥式鏜孔機」及「大型高精度三次元量測儀(三座標量床)」
確實達成應有的加工精度，確保優良的組裝基礎。
7.承襲歐美先進工具機廠的標準，以嚴格維護的「1.2米x1.2米」高精密度的方形標準平板做為精密
精度的基礎，對各項關鍵零件進行精密鏟花(刮研)，使機器的各處結合面和滑動面均能達到正確的
幾何精度，確保機器應有的精度和壽命。
8.搭配高規格的Fanuc數控系統，標準功能包含：15吋彩色液晶螢幕、Fanuc全鍵式操作面板、
2MB記憶容量、Ethernet網路接口、Flash記憶卡插口、剛性攻牙及各種特殊補間(插補)等多項
高規格功能，能經濟有效的滿足各種使用需求。
9.採用的各項配套零組件均經過長期使用驗證，可確保機器長期運行的可靠性。
10.完整的品檢測試流程，搭配先進的自動光學直準儀、雷射干涉儀、球桿檢測儀、線上動平衡儀等
精密檢測儀器，確保出廠的機器都能達到設計的性能和應有的功能。
11.經驗豐富的研發團隊，突破老舊的包袱，協助客戶達成各種特殊需求。
12.兼具經驗和熱誠的服務團隊和完整的服務體系，可以及時有效的讓用戶的機器長保最佳使用狀態。
REN AN INFORMATION TECHNOLOGY CO., LTD.
Product Description :
RenAn's operation simulation workstation is a physical simulation with 3D graphic, showing the cutting and machining process.
[Save consumable cost]: There is no need to worry about the expenditure of consumables, and it will not be affected by pollutants such as waste materials and oil and gas.
[Safety]: Advanced 3D simulation and CNC virtual machine make high risk CNC operation without any danger.
[Smart learning]: Like training the pilot using flight simulators, we use CNC simulator to train the students or operators to be the machinist. Its industrial panel remains the same functionality as real machine that students can practice constantly to accumulate hands-on operation skills.
The controller series of simulator: Fanuc, Siemens, Heidenhain and Mitsubishi.
Turning, Milling, TurnMill, 4 axis, 5 axis.
HC FENG CO., LTD.
Product Description :
Replenishing Fluid automatically, accurate cutting fluid concentration. One equipment to multiple CNC machining centers. The supply line can be as long as 20 meters.
#Filtration by 3 filters #Sterilization by ozone # Oil-water mixer to precise mixing 0-10% cutting fluid #Stirring device avoid cutting fluid become stagnant water. #oil tank level meter for 50 gallon barrel low level detection.
YING HAN TECHNOLOGY CO., LTD.
Product Description :
5-AXIS VERTICAL MACHING CENTER BELONGS LINEAR WAYS ON THREE AXES, X, Y, Z -AXIS TRAVEL: 800x600x550mm, MEEHANITE CAST IRON IS TEMPERED FOR STRESS RELIEF TO ENSURE STRUCTURAL STABILITY WITHOUT DEFORMATION. REINFORCED COLUMN BASE GREATLY INCREASES STRUCTURAL STRENGTH AND WILL EXHIBIT ULTRA-HIGH STABILITY DURING HIGH SPEED OPERATION. WITH THE EQUIPMENT OF CNC TILTING ROTARY TABLE, THE MACHINE IS ABLE TO PERFORM 5-AXIS MACHINING, IT CAN MACHINE COMPLEX, MULTI-SIDED PARTS IN A SINGLE SETUP, THEREBY REDUCING SETUP TIME WHILE INCREASING PART ACCURACY.
WELE MECHATRONIC CO., LTD.
Product Description :
1.高剛性高穩定性結構
A. 底座：機器底座採用整體式鑄件，有效確保機器剛性。Z底座採4線軌設計，全行程範圍內直接落地支持，有絕佳的剛性及穩定性，確保整體長期幾何精度。
B. 滑座：滑座採用整體式鑄件，支撐於Z底座上，4線軌設計增加滑座負載剛性。
C. 立柱：立柱採用整體式鑄件，有效確保機器剛性；且固定不移動，大大減少主軸移動行程中所帶來的幾何精度誤差影響。
2. XYZ三軸及W軸導軌均採用先進的超重負荷型「滾柱」線性導軌，大幅度提高導軌「剛性」和「重切削能力」，也繼續保有「低摩擦力、低磨耗、低遲滯現象、低失位量、高速度、高精度、高動態特性、高壽命、不需調整」等線性導軌的優良特性。
3.XYZW四軸的均有過負載保護，如因誤操作造成撞機，可有效降低對機器的損傷。
4.雙編碼器回饋裝置（配置於XYZ三個進給軸)，B軸採用(圓光栅-角度編碼器) 廠牌：發格Fagor。
5.主軸箱等關鍵零件係利用「大型臥式搪孔機」及「大型高精度三次元量測儀（三座標量床）」確實達成應有的加工精度，確保優良的組裝基礎。
6.鞍頭：110主軸系統配備搪孔軸直徑110mm，搪孔軸行程W=500mm、3500 rpm(兩檔齒輪箱)。搪孔軸為氮化處理高硬度合金鋼件，前段支持使用傳統的硬化襯套外，後段附加線性導軌的加強支持，借助滾動低磨耗的特性，增長搪孔軸的精度壽命。
7.主軸前軸承採用直徑150mm的高精度主軸軸承，加上改良設計的軸承配置及潤滑設計，有效的提高主軸剛性和壽命。
8.主軸鬆刀採浮動式抓鬆刀裝置，鬆刀時不會施力於主軸軸承上，可長保主軸最佳精度；另，新式鬆刀缸配置設計，可使主軸於任一行程(W軸)位置換刀。
9.特殊設計的自動潤滑系統；潤滑油與切削液分開， 單獨收集可確保切削液的穩定性及工作環境的清潔。
10.刀庫採立柱側背式設計；刀庫與立柱接合，不同於落地型式，立柱固定不移動，刀庫與鞍頭配置可達成左右平衡架構，提高W軸動態穩定特性。
11.承襲歐美先進工具機廠的標準，以嚴格維護的「1.2米x1.2米」高精密度的方形標準平板做為精密度的基礎，對各項關鍵零件進行精密鏟花（刮研），使機器的各處結合面和滑動面均能達到正確的幾何精度，確保機器應有的精度和壽命。
12.採用的各項配套零組件均經過長期使用驗證，可確保機器長期運行的可靠性。
13.電氣箱採全密閉式循環熱交換系統，內部配線均參考德國工業安全標準，電源部份與訊號線區隔，以增加機器使用上的安全。
14.搭配高規格的Fanuc 0i MF Plus數控系統，標準功能包含：15吋彩色液晶螢幕、Fanuc全鍵式操作面板、1280米記憶容量、Ethernet網路接口、Flash記憶卡插口、Manual Guide i圖形對話式編程、剛性攻牙、手動剛性攻牙、AI contour control II等多項高規格功能，能經濟有效的滿足各種使用需求。
15.完整的品檢測試流程，搭配先進的自動光學直準儀、雷射干涉儀、球桿檢測儀、線上動平衡儀等精密檢測儀器，確保出廠的機器都能達到設計的性能和應有的功能。
16.經驗豐富的研發團隊，突破老舊的包袱，協助客戶達成各種特殊需求。
17.兼具經驗和熱誠的服務團隊和完整的服務體系，可以及時有效的讓用戶的機器長保最佳使用狀態。
CAMPRO PRECISION MACHINERY CO., LTD.
Product Description :
Campro manufactures a family of Double Column Machining with size up to 5,200 x 3,100 mm travels. The machines offer the highest accuracies of any bridge mill on the market and can machine large parts efficiently with its rigid design. The extended Y-axis has full supported and constructed with a base/bed casting. The PV-XX16 (1,600 mm travels on Y-axis) is one-piece monoblock column structure that is bolted to the bed, delivers rigidity and stability. The PV-xx21 and PV-xx26 have wider door span and bigger machining range, the optional 1,000 mm Z-axis travel is best for attached head requested user.
SHE HONG INDUSTRIAL CO., LTD.
Product Description :
Intelligent, Specialized in heavy duty cutting
Optimum stability & High rigidity of 3-axes box guideway model
+One of Major 6 Brands of Self-Made NC Controllers Taiwan One and Only Hartrol Premium Controller
+AI intelligent technology Automatic tuning parameter maintains accuracy
+For box guideway model, 50% Quadrant Error reduced and 30% reduction in backlash error
+25% wider width, 15% rigidity increased
+15% ~ 20% machining efficiency better than peers
+30% accuracy better than peers with full stroke support of saddle design, which ensures structure stability and durability
