Theme
Digital Transformation
Green Transformation
EQP SERIES CO., LTD
Product Description :
任何人都可以輕鬆測量振動。 實現超小型、簡單、實用、快速的測量。
手持式便攜型振動計。
Hi/Lo 靈敏度切換，可以進行較寬範圍之測量
加速度測量範圍為0.01m/s2 至199.9m/s2
速度測量範圍為0.01mm/s 至199.9mm/s
位移測量範圍為0.001 至19.99mm(P-P）
使用兩節 AA 鹼性電池，可連續使用 30 小時以上。
所有附件（如觸針、磁鐵、安裝螺釘和手提箱）均作為標準配置提供。
它符合振動烈度測量設備標準JIS B 0907，能夠確定旋轉機械等的質量。
通過各種擴展選項可以進行振動波形記錄和頻率分析。
符合歐洲CE規範之產品。
G-TECH INSTRUMENTS INC.
Product Description :
★Multi-Channel Dynamic Measurement: 4-CH simultaneous analog input, compatible to accelerometer, microphone, etc.
★Digital Data Processing: Local real-time computing, data storage, and transmit to data center via ethernet.
★Test & Measurement : Remote Mode--FFT Analyzer；Standalone Mode--Data Recorder & Transmitter.
★Condition Monitoring: Programable multiple I/O interface, connect to controller for intelligent manufacture.
G-TECH INSTRUMENTS INC.
Product Description :
A rotor that does not perform dynamic balance correction may produce unnecessary vibrations and thus reduce the productivity of the machine, as well as damage to the bearings. At the same time, it may cause damage to the outer frame or supporting device and foundation during severe movement.
G-Tech HJ-4250S-A Hard Bearing Balancing Machine is applicable for tool machine spindles, high-speed built-in spindles, motor rotors / motors, rollers, fans, centerless grinding wheels.
A maximum rotor weight of 500kg, a maximum rotor diameter of 1 meter, and measurement accuracy at low speed dynamic balance is 0.5gram-mm(max), and the can be 0.05gram-mm(max) at high-speed dynamic balance.
JASON AUTOMATION CO., LTD.
Product Description :
From the robust aluminum square profile, the versatile EcoShape round tubes, through to linear guides and a wide range of connection solutions: The Bosch Rexroth modular profile system currently includes more than 1,500 modular components for all areas of your production – even for ESD, clean and dry room applications. All components are finely coordinated and offer you an almost infinite number of combination possibilities when designing your working environments.
ICOP Technology Inc.
Product Description :
The QEC-M series is an EtherCAT master that uses a dual-core, independently operating DM&P Vortex86EX2 processor for real-time, reliable synchronous EtherCAT control. The master core of the processor serves as the Arduino development environment; the slave core of the processor serves as the Real-time EtherCAT master. The two cores exchange data via Inter-Processors Communications (IPC).
DKSH Taiwan Ltd.
Product Description :
PC F series is designed to produce maximum distillate quality with minimum capital and operating costs. Each model is a compact skid-mounted unit, simple, safe and easy to move. Control is by a PLC, including the functions of feed and discharge, therefore allowing automatic operation and minimum supervision. All models are designed for continuous operation, 24h/day, and require just electrical supply and compressed air.
PC F series evaporators operate in a high vacuum condition, with the boiling chamber pressure set at 5-6 kPa (absolute vacuum), in order to save the thermal energy produced by the heat pump. In this way the boiling temperature of the wastewater is approximately 40°C (104°F) and typical phenomena (scaling, precipitation, corrosion) which may reduce the performance are either eliminated or considerably reduced.
From 0,7 to 24 m3/day – 0.13 – 4.4 US gpm of distillate
Dramatic reduction of volumes and disposal costs
Water reuse and matter recovery
G-TECH INSTRUMENTS INC.
Product Description :
★POSITION INSPECTOR: Quick health check of your machine tool linear axis
★POSITION ANALYZER: In-depth analysis & diagnostics of your machine tool linear axis
★ROTARY AXIS INSPECTOR: Quick health check of your machine tool rotary axis
★ROTARY AXIS ANALYZER: In-depth analysis & diagnostics of your machine tool rotary axis
★SPINDLE INSPECTOR: Quick health check of your spindle accuracy & performance
★SPINDLE ANALYZER: In-depth analysis & diagnostics of your spindle accuracy & performance
