Theme
Digital Transformation
Green Transformation
EQP SERIES CO., LTD
Product Description :
任何人都可以輕鬆測量振動。 實現超小型、簡單、實用、快速的測量。
手持式便攜型振動計。
Hi/Lo 靈敏度切換，可以進行較寬範圍之測量
加速度測量範圍為0.01m/s2 至199.9m/s2
速度測量範圍為0.01mm/s 至199.9mm/s
位移測量範圍為0.001 至19.99mm(P-P）
使用兩節 AA 鹼性電池，可連續使用 30 小時以上。
所有附件（如觸針、磁鐵、安裝螺釘和手提箱）均作為標準配置提供。
它符合振動烈度測量設備標準JIS B 0907，能夠確定旋轉機械等的質量。
通過各種擴展選項可以進行振動波形記錄和頻率分析。
符合歐洲CE規範之產品。
DKSH Taiwan Ltd.
Product Description :
EVALED® RV F is the line of mechanical recompression evaporators designed to reach the highest level of reliability in heat transfer, with minimum impact in terms of fouling and scaling.
High efficiency forced circulation shell & tube heat exchanger with horizontal tubes allows wastewater concentration up to the salts solubility limits and to manage also suspended crystals.
Wastewater is constantly treated: the distillate and the concentrate are continuously separated and then simply discharged through a pump. Heat is recovered by cooling the two outlet streams using the inlet effluent.
Available in different materials to treat different effluents containing dissolved salty, organic compounds and even the most aggressive salted wastewater (high chlorides content), produced by various industries.
The MVR is the lowest energy consumption evaporation technology.
• Maximum water recovery;
• Effective reduction of waste to be disposed of;
• Modular and flexible;
• Intuitive HMI;
• Plug & play;
• Minimum labour.
DKSH Taiwan Ltd.
Product Description :
The PC R series evaporators have a heating system based on a heat pump and operate under vacuum at 5kPa and around 30°C (86°F).
Heat exchange occurs within a conical jacket, and the boiling chamber inside part is cleaned by internal scrapers that continuously stir concentrate. This configuration is designed to produce a concentrate with a high final concentration and a distillate with low conductivity.
•From 0,1 to 2 m3/day – 0.02 to 0.37 US gpm of distillate
•Dramatic reduction of volumes and disposal costs
•Matter recovery
Extremely suitable when:
•the wastewater has a high initial content of dissolved or suspended solids
•the wastewater is already pre-concentrated
•the daily volumes are relatively small
•the distillate has to be of the highest quality
•the concentrate has to be recycled
G-TECH INSTRUMENTS INC.
Product Description :
To reduce damages caused by accidental collision, and to record collision events.
✓ Smart monitoring box consisting of sensors & electronics
✓ High bandwidth MEMS tri-axial accelerometer (X, Y & Z)
✓ Relay triggered in less than 1 millisecond upon a collision
✓ Built-in data log for max. 5,000 collision events
✓ Easy installation on machine structure
✓ Easy software for threshold setting & logging
✓ Economically priced
G-TECH INSTRUMENTS INC.
Product Description :
★POSITION INSPECTOR: Quick health check of your machine tool linear axis
★POSITION ANALYZER: In-depth analysis & diagnostics of your machine tool linear axis
★ROTARY AXIS INSPECTOR: Quick health check of your machine tool rotary axis
★ROTARY AXIS ANALYZER: In-depth analysis & diagnostics of your machine tool rotary axis
★SPINDLE INSPECTOR: Quick health check of your spindle accuracy & performance
★SPINDLE ANALYZER: In-depth analysis & diagnostics of your spindle accuracy & performance
STAND TOOLS ENTERPRISE CO., LTD.
Product Description :
◎Release magnetic sweeper has a magnetic device which enables to attract any metal items and spare parts laying on the ground without picking them up one by one
◎Pull the trigger to release magnetic force
◎Easy to use, safe and practical time saving device
◎Permanent magnet
G-TECH INSTRUMENTS INC.
Product Description :
The performance of the spindle is an important key to processing quality. When you understand the performance of the spindle, you can predict and control the quality of the processed parts. The shape accuracy, roundness, and surface roughness of the workpieces are all related to the performance of the spindle. Only when the spindle is real measuring the accuracy of the spindle at the processing speed of the machine has meaning to the control of the quality of the processed parts, so measuring and understanding the performance of the machine tool, finding the best working speed, determining the warm-up time, even confirm the accuracy of the spindle after the collision.
LION provided this SEA analysis system as early as 1993 to help spindle manufacturers, machine tool factories and processing plants to reduce workpiece defect rate and improve product quality.
★The SEA system complies with the following international standards:
✓ ANSI / ASME B5.54-2005: "Methods for Performance Evaluation of CNC Machining Centers"
✓ ISO230: Test Code for Machine Tools, 3: "Determination of Thermal Effects" 7: "Geometric Accuracy of Axes of Rotation"
✓ ANSI / ASME B5.57-1998: "Methods for Performance Evaluation of CNC Turning Centers"
✓ ANSI / ASME B89.3.4: "Axes of Rotation, Methods for Specifying and Testing"
