Theme
Digital Transformation
Green Transformation
DKSH Taiwan Ltd.
Product Description :
EVALED® RV F is the line of mechanical recompression evaporators designed to reach the highest level of reliability in heat transfer, with minimum impact in terms of fouling and scaling.
High efficiency forced circulation shell & tube heat exchanger with horizontal tubes allows wastewater concentration up to the salts solubility limits and to manage also suspended crystals.
Wastewater is constantly treated: the distillate and the concentrate are continuously separated and then simply discharged through a pump. Heat is recovered by cooling the two outlet streams using the inlet effluent.
Available in different materials to treat different effluents containing dissolved salty, organic compounds and even the most aggressive salted wastewater (high chlorides content), produced by various industries.
The MVR is the lowest energy consumption evaporation technology.
• Maximum water recovery;
• Effective reduction of waste to be disposed of;
• Modular and flexible;
• Intuitive HMI;
• Plug & play;
• Minimum labour.
G-TECH INSTRUMENTS INC.
Product Description :
★Multi-Channel Dynamic Measurement: 4-CH simultaneous analog input, compatible to accelerometer, microphone, etc.
★Digital Data Processing: Local real-time computing, data storage, and transmit to data center via ethernet.
★Test & Measurement : Remote Mode--FFT Analyzer；Standalone Mode--Data Recorder & Transmitter.
★Condition Monitoring: Programable multiple I/O interface, connect to controller for intelligent manufacture.
DKSH Taiwan Ltd.
Product Description :
The PC R series evaporators have a heating system based on a heat pump and operate under vacuum at 5kPa and around 30°C (86°F).
Heat exchange occurs within a conical jacket, and the boiling chamber inside part is cleaned by internal scrapers that continuously stir concentrate. This configuration is designed to produce a concentrate with a high final concentration and a distillate with low conductivity.
•From 0,1 to 2 m3/day – 0.02 to 0.37 US gpm of distillate
•Dramatic reduction of volumes and disposal costs
•Matter recovery
Extremely suitable when:
•the wastewater has a high initial content of dissolved or suspended solids
•the wastewater is already pre-concentrated
•the daily volumes are relatively small
•the distillate has to be of the highest quality
•the concentrate has to be recycled
DKSH Taiwan Ltd.
Product Description :
PC F series is designed to produce maximum distillate quality with minimum capital and operating costs. Each model is a compact skid-mounted unit, simple, safe and easy to move. Control is by a PLC, including the functions of feed and discharge, therefore allowing automatic operation and minimum supervision. All models are designed for continuous operation, 24h/day, and require just electrical supply and compressed air.
PC F series evaporators operate in a high vacuum condition, with the boiling chamber pressure set at 5-6 kPa (absolute vacuum), in order to save the thermal energy produced by the heat pump. In this way the boiling temperature of the wastewater is approximately 40°C (104°F) and typical phenomena (scaling, precipitation, corrosion) which may reduce the performance are either eliminated or considerably reduced.
From 0,7 to 24 m3/day – 0.13 – 4.4 US gpm of distillate
Dramatic reduction of volumes and disposal costs
Water reuse and matter recovery
ICOP Technology Inc.
Product Description :
DMP Embedded Mini PC series helps companies improve product quality and reliability, lower manufacturing costs with affordable price. EBOX Mini PC Series in 100 x 100mm and 75 x 75mm VESA Standard and DIN Rail designed, perfect platform for IoT, M2M, Industry 4.0, Home Automation, Security, Public transportation, Medical, Industrial controls, Point-of-Sales, kiosk, Thin Client, telecommunication, mobile surveillance, environmental monitoring, intelligent transportation systems, automated parking control systems and many other more.
G-TECH INSTRUMENTS INC.
Product Description :
The performance of the spindle is an important key to processing quality. When you understand the performance of the spindle, you can predict and control the quality of the processed parts. The shape accuracy, roundness, and surface roughness of the workpieces are all related to the performance of the spindle. Only when the spindle is real measuring the accuracy of the spindle at the processing speed of the machine has meaning to the control of the quality of the processed parts, so measuring and understanding the performance of the machine tool, finding the best working speed, determining the warm-up time, even confirm the accuracy of the spindle after the collision.
LION provided this SEA analysis system as early as 1993 to help spindle manufacturers, machine tool factories and processing plants to reduce workpiece defect rate and improve product quality.
★The SEA system complies with the following international standards:
✓ ANSI / ASME B5.54-2005: "Methods for Performance Evaluation of CNC Machining Centers"
✓ ISO230: Test Code for Machine Tools, 3: "Determination of Thermal Effects" 7: "Geometric Accuracy of Axes of Rotation"
✓ ANSI / ASME B5.57-1998: "Methods for Performance Evaluation of CNC Turning Centers"
✓ ANSI / ASME B89.3.4: "Axes of Rotation, Methods for Specifying and Testing"
