Theme
Digital Transformation
Green Transformation
G-TECH INSTRUMENTS INC.
Product Description :
★POSITION INSPECTOR: Quick health check of your machine tool linear axis
★POSITION ANALYZER: In-depth analysis & diagnostics of your machine tool linear axis
★ROTARY AXIS INSPECTOR: Quick health check of your machine tool rotary axis
★ROTARY AXIS ANALYZER: In-depth analysis & diagnostics of your machine tool rotary axis
★SPINDLE INSPECTOR: Quick health check of your spindle accuracy & performance
★SPINDLE ANALYZER: In-depth analysis & diagnostics of your spindle accuracy & performance
G-TECH INSTRUMENTS INC.
Product Description :
A rotor that does not perform dynamic balance correction may produce unnecessary vibrations and thus reduce the productivity of the machine, as well as damage to the bearings. At the same time, it may cause damage to the outer frame or supporting device and foundation during severe movement.
G-Tech HJ-4250S-A Hard Bearing Balancing Machine is applicable for tool machine spindles, high-speed built-in spindles, motor rotors / motors, rollers, fans, centerless grinding wheels.
A maximum rotor weight of 500kg, a maximum rotor diameter of 1 meter, and measurement accuracy at low speed dynamic balance is 0.5gram-mm(max), and the can be 0.05gram-mm(max) at high-speed dynamic balance.
G-TECH INSTRUMENTS INC.
Product Description :
★Multi-Channel Dynamic Measurement: 4-CH simultaneous analog input, compatible to accelerometer, microphone, etc.
★Digital Data Processing: Local real-time computing, data storage, and transmit to data center via ethernet.
★Test & Measurement : Remote Mode--FFT Analyzer；Standalone Mode--Data Recorder & Transmitter.
★Condition Monitoring: Programable multiple I/O interface, connect to controller for intelligent manufacture.
STAND TOOLS ENTERPRISE CO., LTD.
Product Description :
◎Release magnetic sweeper has a magnetic device which enables to attract any metal items and spare parts laying on the ground without picking them up one by one
◎Pull the trigger to release magnetic force
◎Easy to use, safe and practical time saving device
◎Permanent magnet
DKSH Taiwan Ltd.
Product Description :
EVALED® RV F is the line of mechanical recompression evaporators designed to reach the highest level of reliability in heat transfer, with minimum impact in terms of fouling and scaling.
High efficiency forced circulation shell & tube heat exchanger with horizontal tubes allows wastewater concentration up to the salts solubility limits and to manage also suspended crystals.
Wastewater is constantly treated: the distillate and the concentrate are continuously separated and then simply discharged through a pump. Heat is recovered by cooling the two outlet streams using the inlet effluent.
Available in different materials to treat different effluents containing dissolved salty, organic compounds and even the most aggressive salted wastewater (high chlorides content), produced by various industries.
The MVR is the lowest energy consumption evaporation technology.
• Maximum water recovery;
• Effective reduction of waste to be disposed of;
• Modular and flexible;
• Intuitive HMI;
• Plug & play;
• Minimum labour.
DKSH Taiwan Ltd.
Product Description :
The PC R series evaporators have a heating system based on a heat pump and operate under vacuum at 5kPa and around 30°C (86°F).
Heat exchange occurs within a conical jacket, and the boiling chamber inside part is cleaned by internal scrapers that continuously stir concentrate. This configuration is designed to produce a concentrate with a high final concentration and a distillate with low conductivity.
•From 0,1 to 2 m3/day – 0.02 to 0.37 US gpm of distillate
•Dramatic reduction of volumes and disposal costs
•Matter recovery
Extremely suitable when:
•the wastewater has a high initial content of dissolved or suspended solids
•the wastewater is already pre-concentrated
•the daily volumes are relatively small
•the distillate has to be of the highest quality
•the concentrate has to be recycled
LNC TECHNOLOGY CO., LTD.
Product Description :
‧Provide control and development flexibility, quickly upgrade equipment to smart machines
‧Fourth/fifth-axis control ;provide up to 32-axis control via EtherCAT protocol
‧Optional RFID function for personnel authority and data control
‧Optional robot control function module, integrated robot control with tool machine to complete automation processing.
‧Connect to LNC smart vibration sensor, SVI1000/2000 to develop various smart value-added functions
‧Connect with video devices to develop image-related application functions, such as processing monitoring or positioning.
ICOP Technology Inc.
Product Description :
The QEC-M series is an EtherCAT master that uses a dual-core, independently operating DM&P Vortex86EX2 processor for real-time, reliable synchronous EtherCAT control. The master core of the processor serves as the Arduino development environment; the slave core of the processor serves as the Real-time EtherCAT master. The two cores exchange data via Inter-Processors Communications (IPC).
