Theme
Digital Transformation
Green Transformation
DKSH Taiwan Ltd.
Product Description :
PC F series is designed to produce maximum distillate quality with minimum capital and operating costs. Each model is a compact skid-mounted unit, simple, safe and easy to move. Control is by a PLC, including the functions of feed and discharge, therefore allowing automatic operation and minimum supervision. All models are designed for continuous operation, 24h/day, and require just electrical supply and compressed air.
PC F series evaporators operate in a high vacuum condition, with the boiling chamber pressure set at 5-6 kPa (absolute vacuum), in order to save the thermal energy produced by the heat pump. In this way the boiling temperature of the wastewater is approximately 40°C (104°F) and typical phenomena (scaling, precipitation, corrosion) which may reduce the performance are either eliminated or considerably reduced.
From 0,7 to 24 m3/day – 0.13 – 4.4 US gpm of distillate
Dramatic reduction of volumes and disposal costs
Water reuse and matter recovery
DKSH Taiwan Ltd.
Product Description :
The PC R series evaporators have a heating system based on a heat pump and operate under vacuum at 5kPa and around 30°C (86°F).
Heat exchange occurs within a conical jacket, and the boiling chamber inside part is cleaned by internal scrapers that continuously stir concentrate. This configuration is designed to produce a concentrate with a high final concentration and a distillate with low conductivity.
•From 0,1 to 2 m3/day – 0.02 to 0.37 US gpm of distillate
•Dramatic reduction of volumes and disposal costs
•Matter recovery
Extremely suitable when:
•the wastewater has a high initial content of dissolved or suspended solids
•the wastewater is already pre-concentrated
•the daily volumes are relatively small
•the distillate has to be of the highest quality
•the concentrate has to be recycled
JASON AUTOMATION CO., LTD.
Product Description :
From the robust aluminum square profile, the versatile EcoShape round tubes, through to linear guides and a wide range of connection solutions: The Bosch Rexroth modular profile system currently includes more than 1,500 modular components for all areas of your production – even for ESD, clean and dry room applications. All components are finely coordinated and offer you an almost infinite number of combination possibilities when designing your working environments.
G-TECH INSTRUMENTS INC.
Product Description :
A rotor that does not perform dynamic balance correction may produce unnecessary vibrations and thus reduce the productivity of the machine, as well as damage to the bearings. At the same time, it may cause damage to the outer frame or supporting device and foundation during severe movement.
G-Tech HJ-4250S-A Hard Bearing Balancing Machine is applicable for tool machine spindles, high-speed built-in spindles, motor rotors / motors, rollers, fans, centerless grinding wheels.
A maximum rotor weight of 500kg, a maximum rotor diameter of 1 meter, and measurement accuracy at low speed dynamic balance is 0.5gram-mm(max), and the can be 0.05gram-mm(max) at high-speed dynamic balance.
