Theme
Digital Transformation
Green Transformation
Hainbuch GMBH
Product Description :
Increasing process stability is crucial for optimizing production. Hainbuch offers an extremely innovative solution here with the new Maxxos T212 mandrel: The Maxxos T212 is a mandrel with a pull-back effect and is therefore ideal for 5-sided machining of the workpiece on both turning and milling centers. Thanks to the hexagonal pyramid shape, the Maxxos mandrel has been developed for maximum accuracy and feed rates. The hexagonal mandrel achieves a significantly higher holding power than the round Mando mandrel and enables up to double the torque transmission and corresponding cutting rates. Hainbuch offers the Maxxos T212 mandrel in 12 sizes for the diameter range 8mm to 200mm. The Maxxos T212 mandrel has no draw bolt. It is therefore ideal for workpieces with blind holes and very short clamping lengths without any loss of clamping length.
HC FENG CO., LTD.
Product Description :
Replenishing Fluid automatically, accurate cutting fluid concentration. One equipment to multiple CNC machining centers. The supply line can be as long as 20 meters.
#Filtration by 3 filters #Sterilization by ozone # Oil-water mixer to precise mixing 0-10% cutting fluid #Stirring device avoid cutting fluid become stagnant water. #oil tank level meter for 50 gallon barrel low level detection.
kai cheng co.,ltd
Product Description :
1. The all new model Magnetic Clamping Block KCB Series are a new sense of clamping way for metal working on CNC Machining Center and Milling Machine in quick clamp workpieces.
2. Free to set up position, numbers and distance of Magnetic Clamping Block according to the size of workpiece.
3. The KCB Series including changeable Induction Soft Block. It can be revised the surface to be 100% accuracy on the machine for clamp workpieces. Can be also cutting, drilling, tapping and slotting directly to the Induction Soft Block during machining workpiece. Multi-function of Induction Soft Block, the user can make it by themselves according to workpiece required.
4. Two machining circle for finish workpiece machining, increase a lot of machining efficiency and achieve accuracyrequired.
kai cheng co.,ltd
Product Description :
1.Suitable for CNC Vertical machining center (Can do 5 sides machining)
2.Suitable for thin, small , medium and large workpiece on varies cutting machining.
3.Suitable for thin, small , medium and large workpiece of the drilling and finishing machining.
4.Minimum size of workpiece required as 4 alternate magnetic square poles and above contacts is necessary for
optimum clamping.
5.More functions for cooperate with Induction Block and Spring Block.
FALCON MACHINE TOOLS CO., LTD.
Product Description :
Easy Setup, Flexible and Sealed for Grinding
The FVGC Series of vertical grinding machines is another prime example of Chevalier's position as the global leader in grinding technology. The series seamlessly increases efficiency and productivity for such industries as semiconductor, punch and aerospace, as well as other sectors for which these machines can be equipped. Workpieces in these fields primarily are a composite, single crystal silicon or brittle, along with other materials that present process challenges.
REN AN INFORMATION TECHNOLOGY CO., LTD.
Product Description :
Just like the real CNC machine, equipped with exactly same overall appearance, actual handwheel and real machine operation panel as numerical control machine.
Solving the difficulties of real machine: precise, complicated and very expensive.
With CNC Simulator, everyone can learn CNC machine operation and accumulate hands-on operation skills.
CNC training machine is equipped with exactly same overall appearance, actual handwheel and real machine
operation panel as numerical control machine. Its purpose is to train students for accumulating CNC machine operation skills (program transmission, programming, tool selection, tool compensation and alarm clear )
Overall design is more attractive, and it emphasizes on interaction to make students less mistakes happened.
Not only decreasing learning cost but also letting students work and learn in the safe environment.
HEIDENHAIN CO., LTD. (TAIWAN)
Product Description :
Linear encoders are indispensable for machines with high demands regarding positioning accuracy and machining speed. Linear encoders directly and immediately measure the actual position of the feed axis. This makes it possible to eliminate a number of potential error sources: Positioning error due to thermal behavior of the recirculating ball screw
, Reversal error, errors due to deformation of the drive mechanics by machining forces, kinematic errors through pitch error in the recirculating ball screw.
CHIEN CHENS MACHINERY CO., LTD.
Product Description :
Specification
Table size: 1515 x 470 mm
Longitudinal travel: 1300 mm
Cross travel: 600 mm
A axis travel: 370 mm
Y slide way width: 720 mm
Z Slide high: MAX 700 mm
Z Slide way width: 420 mm
Spindle taper: NT#40(BT)
Spindle motor: 5HP / 4P
Spindle speed: 70~3600 RPM
Horizontal Spindle motor: 5HP / 4P
HorizontalSpindle speed: 70~3600 RPM
Feeding speed: 10~6000 mm/min
Ballscrew: Ø32 mm C5
Net weight: 3500 kgs
REN AN INFORMATION TECHNOLOGY CO., LTD.
Product Description :
RenAn's operation simulation workstation is a physical simulation with 3D graphic, showing the cutting and machining process.
[Save consumable cost]: There is no need to worry about the expenditure of consumables, and it will not be affected by pollutants such as waste materials and oil and gas.
[Safety]: Advanced 3D simulation and CNC virtual machine make high risk CNC operation without any danger.
[Smart learning]: Like training the pilot using flight simulators, we use CNC simulator to train the students or operators to be the machinist. Its industrial panel remains the same functionality as real machine that students can practice constantly to accumulate hands-on operation skills.
The controller series of simulator: Fanuc, Siemens, Heidenhain and Mitsubishi.
Turning, Milling, TurnMill, 4 axis, 5 axis.
HEIDENHAIN CO., LTD. (TAIWAN)
Product Description :
In addition to milling operations, the TNC 640 also combines operations from milling, turning, and grinding processes. This sets the TNC 640 apart as a high-end control within its field of application. It is particularly well suited to HSC and 5-axis simultaneous machining, including on fully automated machining centers. The TNC 640 stands for perfect surface quality, exceptional accuracy, and very short machining times combined with shop-friendly operation and programming. On a milling/ turning machine with TNC 640, you machine the complete work piece on one machine in whatever sequence is needed. You can switch back and forth regardless of the machine and its axis configuration. The TNC 640 makes all necessary adjustments, e.g. switching to diameter display and setting the datum in the rotary table center. Batch Process Manager allows you to optimally plan and execute production jobs with great ease. With Batch Process Manager you can flexibly define the sequence of your jobs and, prior to machining, check to ensure that all of the required tools are available and that the NC program will run without errors.
