Search List

Category
BLASER SWISSLUBE TAIWAN INC.
Booth Number :
Product Description :
JUAN CHEN INTERNATIONAL CO.,LTD
Booth Number :
Product Description : The TY type and NW type are specially designed for small equipment. TY type and NW type can be combined with quantitative volume type distributor, and can also be matched with resistance type distributor. Can choose with controller or without controller. Working pressure 1.5 ~ 1.7MPa Oil output 100 ~ 200ml / min Oil tank 1.5L & 2L Voltage 110V and 220V .
CHANGHUA CHEN YING OIL MACHINE CO., LTD
Booth Number :
Product Description : 1. CEN03 type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors. With CAB or CBB type volume distributor, oil will feed during operation time. With CDB or T type volume distributor, oil will feed during interval time. 2. The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil. 3. It has a spark-eliminator inside to prevent the sparks producing when the electric current is running. The spark-eliminator can avoid PLC (Programmable Logic Controller) being interfered. 4. CEN03 type has a pressure switch device and been set up as 8kg/cm2, which assures the oil volume of lubrication point and check if the piping works normally. The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have signal. NO (Normal Open) contact is available on request. 5. It has a float switch that can detect the oil volume. When oil is lower than the minimum level, the float switch will automatically send a continuous signal. 6. It has a pressure gauge where an operator can check the pressure easily. 7. Do not press the force feed-oil (F button) more than three minutes in order to avoid overloading. When the temperature reaches 100℃, the sensor will be on to stop the motor continuing running about 5 minutes. 8. It can be used for the machines requiring strictly rationing oil flow. It is usually used for such as processing machines or projecting machines.
BLASER SWISSLUBE TAIWAN INC.
Booth Number :
Product Description :
JIN TAIRY ELECTRIC CO.,LTD.
Booth Number :
Product Description : The source of PM2.5 is the two major emissions from vehicles and factories. PM2.5 is almost equivalent to the overall air pollution. Juntai Electronics has focused on industrial air pollution control in recent years, and has continuously developed innovative "oil mist air purifier" series, subverting the traditional thinking of oil mist machine operation, with unique outstanding efficacy and performance, using a unique centrifugal principle, lasting efficacy Constant, eliminating the cost of replacement of consumable materials and labor maintenance costs, compared to the same level model, it can save up to 20% of driving power, high efficiency and energy saving, regardless of appearance, design and performance, are the best in the industry.
JUAN CHEN INTERNATIONAL CO.,LTD
Booth Number :
Product Description : PJ Type is a filling grease lubrication pump. PJB Type is an Grease Catridge lubrication pump. Both PJ and PJB lubricating pumps can be selected with or without pressure relief. Working pressure: 8MPa, oil output: 20ml / min, voltage: 24V, 220V, 380V There are three types of filling lubrication pump oil tanks: 0.3L, 0.8L, 1.5L Can be applied to rubber and plastic machinery, machine tools, forging machinery, die casting machines, transportation vehicles ... etc.
YU LIEN MACHINERY CO., LTD.
Booth Number :
Product Description : FEATURES: 1. SUITABLE FOR STANDARD 50 GALLON GREASE BARREL. OPERATION COULD START AFTER PLACING GREASE TANK. 2. GREASE LOWER LIMIT ALARM AUTOMATICALLY REPORTS THE TIMING FOR CHANGING GREASE BARREL, ABSOLUTELY PREVENTING INSUFFICIENT GREASE OUTPUT. 3.EQUIPPED WITH VARIABLE-FREQUENCY DRIVE ENHANCES FOR OUTPUT ADJUSTMENT AND ENERGY SAVING.
JIN TAIRY ELECTRIC CO.,LTD.
Booth Number :
Product Description : INNOVATIVE POWER SOURCE • AIR DRIVE • FAST SUCTION AND FILTRATION The JT-CS chip suction machine is designed for solving the problem of chips depositing in the coolant tank.The unit is suitable for fast suction and filtration for chips and sludge depositing at the bottom of the coolant tank.Its patented design of power source can effectively eliminate the problems of blockage and parts wear.
UNITIDE INDUSTRIAL CO., LTD.
Booth Number :
Product Description : 與傳統的機械螺紋鎖固方式相比,Loctite®樂泰螺絲固定劑的優勢 ● 防止意外的移動、鬆脫、洩漏和腐蝕 ● 螺紋密封,可以使用在通孔的密封 ● 單液型,容易施膠及清除 ● 可以應用在所有型號的緊固件上,降低庫存成本 ● 抗震動
JUAN CHEN INTERNATIONAL CO.,LTD
Booth Number :
Product Description : Pour-in lubrication pumps only use NLGI.000 grease. Used in screw and slide of machine tools. It comes with a special No. 000 grease refill pack from Japan NIPPON GREASE. Advantages of using a pour-in lubrication pump: 1. Lubrication pump body with level switch and pressure switch and pressure gauge. 2. It is convenient to replenish grease, the oil tank is 2L. You can use longer time to replenish grease. 3. Low output pressure of lubricating pump, no need to configure high- pressure pipe, which can reduce costs. 4.The voltage is 220V and 380V, and the lubrication pump can be selected with or without controller.
JUAN CHEN INTERNATIONAL CO.,LTD
Booth Number :
Product Description : The mouth thread of UMF Grease Catridge is the same as LHL, and the grease content is better than LHL. It has been used on many customers' LUBE lubrication pumps, including: Japan MAZAK, Japan Brother, Dongtai Seiki ... etc. UMF grease Catridge are divided into 500c and 700cc 700cc can be used for LUBE and HERG lubrication pumps 500cc can be used for SHOWA lubrication pump
Quick Search PULL