Theme
Digital Transformation
Green Transformation
HYDROKOMP GmbH
Product Description :
The rotary lever clamp is especially suited for clamping fixtures with only little space for the installation of clamping elements. Its construction and compact design allows flexible solutions at various installation conditions. HYDROKOMP offers hydraulic rotary lever clamps which are single-acting as well double-acting. They are used in clamping fixtures whose oil supply is made through drilled channels. To swing down the clamping arm, the linear motion is used pro rata which clamps the workpiece. To unclamp, the clamping arm swings back to where the workpiece can be safely taken out.
HYDROKOMP GmbH
Product Description :
Coupling elements of HYDROKOMP are made of stainless materials. This enables the elements to be used for all fluids and gases that are not aggressive. Special designs eg. for water steam or other media are available on request. HYDROKOMP offers coupling elements for two different operating modes depressurized coupling or pressurized coupling. The elements for depressurized coupling can be coupled pressurized up to 25 bar, if the specified volume flow is not be exceeded. When using higher operating pressure there ockures a risk of demaging the soft seal in the check valve as the result of high flow velocities of the fluid. This means for coupling of air up to 10 bar there should be always used the coupling elements for depressurized coupling. This also applies when the coupling process is initiated pressurized. The elements which can be coupled pressurized may be coupled up to the maximum specified operating pressure on one side and / or on both sides.
JASON AUTOMATION CO., LTD.
Product Description :
CytroPac - The compact revolution for hydraulic power units: completely equipped and integrated.
Rexroth has started the hydraulic power unit revolution. Lack of installation space is no longer a reason to go without hydraulic power: The new CytroPac power unit provides maximum power in the smallest space with everything you need for fast installation – including an economical Sytronix drive, completely wired frequency converter and Industry 4.0 compatibility. With powerful 4 KW and pressure of 240 bar in 50 percent less installation space. Furthermore, CytroPac also complies with the EU Ecodesign Directive 2009/125/EC. Simply connect power, fluid and interface and go. A small revolution!
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
🔹The optimized design of the accessories of CHA / CHA-P series makes the structure more compact and increases the product strength.
🔹 CHA / CHA-P series equipped with special dustproof design and have high sealing performance.
🔹The designation of high anti-torque makes the durability long.
🔹 Max. operating pressure：70 kgf/cm²
Min. operating pressure：15 kgf/cm²
🔹Double acting
CHUAN TAI HYDRAULIC MACHINERY CO., LTD.
Product Description :
The oil return filter is mainly installed on the oil return line of the hydraulic system. Various impurities such as abrasive particles generated during the work of various hydraulic components can be blocked by setting the oil return line to filter and avoid returning to the tank again.
CHUAN TAI HYDRAULIC MACHINERY CO., LTD.
Product Description :
This product is longer than ordinary commercially available filter elements, the filter area becomes larger, the effect is better, and the number of replacement and cleaning is effectively reduced
FUTECH PRECISION CO.,LTD.
Product Description :
Ultra-short, large-diameter rotary hydraulic cylinder, lightweight design, more stable performance during high rotation, reducing spindle load.
The built-in safety self-locking valve ensures the pressure is immediately maintained during abnormal power outage and the built-in pressure relief valve.
Dual-purpose type, can be installed by the front and rear ends.
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
＊High supporting force
CSP-P/ CSP-K increases the holding force between the piston rod and the inner jacket to arise the higher supporting force.
＊Coolant cleaning measures
In order to prevent the malfunction from the intrusion of high-pressure coolant and the cutting dust entering the internal structure, air can be cleaned at the breathing port when replacing the workpiece. Air cleaning requires a dedicated air circuit. (recommended cleaning pressure is 0.3 - 0.5MPa).
＊Universal piping base
CSP-P/ CSP-K piping base is interchangeable, which can be installed with other low-pressure cylinders in the same specifications.
Parjet Co.,Ltd.
Product Description :
ParSave® - Bearing Isolator, is an extension of Parjet PTFE products. It is a sealing device developed to protect the rolling bearings of rotary equipment and can replace traditional lip seals (also known as rubber oil seals). The special configuration of the labyrinth ring combination helps to eliminate common sealing issues. Common issues includes the shaft damages caused by the wear of the rotating shaft from the lip seals and malfunction caused by the intrusion of foreign objects or water vapor. ParSave® can effectively extend the service life of the bearings and rotating shafts. Additionally, due to the unique sealing mechanism, there is no contact between mating surfaces, so there are no potential wear and pollution problems. With the characteristics of the PTFE material such as excellent heat resistance, self lubrication and chemical resistance, ParSave® can operate effectively under harsh environments.
HYDROKOMP GmbH
Product Description :
Swing clamp cylinders release the clamping point on the workpiece. With this, it is easy to change the workpiece. This hydraulic swing clamp cylinder operates as single-acting or double-acting traction cylinder, whereas part of the stroke is used to rotate the piston. The model with 0° swing angle operates only vertical as traction cylinder.
To guarantee a long lifetime the cylinders have an integrated metal wiper as standard. For oil supply, the cylinders are equipped with threaded port and manifold port with O-ring for drilled channels. You can select between right or left turning models with various standardized swing angles. The integrated overload protection protects the swing mechanism from damage due blockage of the rotation or improper assembly of the clamping arm.
For any risk of exceeding the permitted volume flow a throttle check valve must be interposed into the oil supply line. Counter-hold the clamping arm when tightening or loosening the counter nut in order to prevent torque transfer to the piston rod and to avoid damage to the ball guide. Variations with 0°, 30°, 45°, 60° and 90° swing angles are available. The permitted operating pressure is depending from the clamping arm length.
