Theme
Digital Transformation
Green Transformation
FUTECH PRECISION CO.,LTD.
Product Description :
Ultra-short, high speed, light weight.
Designed with a detection device, which can be equipped with an inductive proximity switch.
Easy to adjust to ensure the correct operation of the hydraulic cylinder.
Built-in safty self-locking valve and pressure relief valve.
Dual-purpose type, can be installed by the front and rear ends.
The oil pipe must be connected to the oil pressure tank separately to avoid back pressure.
Parjet Co.,Ltd.
Product Description :
HiPerSeal®, aka Spring Energized Seal and Teflon Spring Seal, is a U-shaped machined performance polymer that utilizes a single spring energizer to provide force for the sealing lips. The seal jacket is made from PTFE compounds using high-performance polymer fillers to enhance overall spring seal life and wear resistance properties. The system pressure ultimately increases the sealing force and creates a leak tight seal. Because the spring loaded seal utilizes a spring, slight misalignment is tolerated, and the sealing force and jacket wear is more consistent. Spring energizers are available in corrosion resistant metal alloys such as stainless steel, Elgiloy and Hastelloy to meet the most serious corrosive and high temperature applications. We offer a wide variety of springs energizers including Canted Coil springs, Helical springs and Cantilever springs. For more information, you may refer to the tab "Spring" under "Products".
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
＊High supporting force
CSP-P/ CSP-K increases the holding force between the piston rod and the inner jacket to arise the higher supporting force.
＊Coolant cleaning measures
In order to prevent the malfunction from the intrusion of high-pressure coolant and the cutting dust entering the internal structure, air can be cleaned at the breathing port when replacing the workpiece. Air cleaning requires a dedicated air circuit. (recommended cleaning pressure is 0.3 - 0.5MPa).
＊Universal piping base
CSP-P/ CSP-K piping base is interchangeable, which can be installed with other low-pressure cylinders in the same specifications.
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
Clamptek’s CLF5H series designed with connecting rod structure which can operate conveniently. CLF5H series can also reduce the interference with loading and unloading operation, because when CLF5H series is in the unclamping state, it’s clamping arm can be put lower than holding position.
Clamptek’s CLF5H series’ clamping arm is very flexible. By reducing the interference of the surrounding equipment, CLF5H series can save lots of working space.
Clamptek’s CLF5H series equipped with special dust proof design and high sealing, which can prevent the cutting chips and coolant to infiltration. Therefore, CLF5H series can be used in more severe conditions.
Please kindly check the suggested operating pressure as below,
Max. operating pressure: 70 kgf/cm2
Min. operating pressure: 10 kgf/cm2
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
The Thread-body single acting hydraulic cylinder use imported oil seal and accessories to guarantee the quality. No oil leakage while clamping in high pressure for a long time. The volume of the thread-body single acting hydraulic cylinder is small. It can be utilized in a small space in the fixture.
This hydraulic cylinder is used to extend out, and when spring returns, but it can't be used for pulling back.
The angle degree between the cylinder and workpiece could not be larger than 10° while installing.
The bottom of the cylinder barrel needs a leakage-proof gasket.
Max. operating pressure: 250 kgf/cm²
Min. operating pressure: 20 kgf/cm²
Single acting
Usable fluid:
Parjet Co.,Ltd.
Product Description :
HiPerLip®, also known as PTFE Shaft Seal, is a rotary shaft seal with a PTFE sealing lip and metal casing. The rotary seal is ideal for sealing high-speed rotary applications with very low friction and minimal power draw to achieve better performance, higher response, and precision. Thanks to excellent PTFE compounds and the unique sealing lip construction, the PTFE rotary lip seal with metal case provides superior performance over conventional rotary oil seals, especially in high rotary, poorly lubricated, highly corrosive, high temperatures, and other extreme working environments. Typical temperatures range from -60°C to 200°C (-76°F to 390°F), and shaft speeds up to 30 m/s (5,905 fpm) for low pressure applications.
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
🔹The optimized design of the accessories of CHA / CHA-P series makes the structure more compact and increases the product strength.
🔹 CHA / CHA-P series equipped with special dustproof design and have high sealing performance.
🔹The designation of high anti-torque makes the durability long.
🔹 Max. operating pressure：70 kgf/cm²
Min. operating pressure：15 kgf/cm²
🔹Double acting
HYDROKOMP GmbH
Product Description :
The rotary lever clamp is especially suited for clamping fixtures with only little space for the installation of clamping elements. Its construction and compact design allows flexible solutions at various installation conditions. HYDROKOMP offers hydraulic rotary lever clamps which are single-acting as well double-acting. They are used in clamping fixtures whose oil supply is made through drilled channels. To swing down the clamping arm, the linear motion is used pro rata which clamps the workpiece. To unclamp, the clamping arm swings back to where the workpiece can be safely taken out.
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
Clamptek’s CLKA series is using the optimal designation, so the clamping capacity is higher than other cylinders. The cylinder body and the fulcrum are integrated structured. Therefore, the cylinder’s size is smaller and it’s more solid and firm.
Clamptek’s CLKA series uses special dust seals to ensure the high dust proof and high sealing performance. As for the lower flange part, which uses minimized designation, it’s suitable for the compact and light fixture.
If you have any customized requests, please feel free to contact us.
Please kindly check the suggested operating pressure as below,
Max. operating pressure: 70 kgf/cm2
Min. operating pressure: 10 kgf/cm2
