Theme
Digital Transformation
Green Transformation
WEXTEN PRECISE INDUSTRIES CO., LTD.
Product Description :
■ The unit is lightweight, easy to install and noiseless.
■ Unlike traditional air conditioners, the system utilizes oil/water for heat exchange, instead of piping refrigerant gas directly to the cooling coils.
■ Amazing performance even in high environmental temperatures.
■ Achieving energy savings and carbon reduction by applying secondary circulation with P.C.W. or the oil/water coolers.
■ No compressor, no need for refrigerants, so no concerns about Global Warming Potential (GWP) values.
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
Product Description :
1. CEN03 type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors. With CAB or CBB type volume distributor, oil will feed during operation time. With CDB or T type volume distributor, oil will feed during interval time.
2. The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil.
3. It has a spark-eliminator inside to prevent the sparks producing when the electric current is running. The spark-eliminator can avoid PLC (Programmable Logic Controller) being interfered.
4. CEN03 type has a pressure switch device and been set up as 8kg/cm2, which assures the oil volume of lubrication point and check if the piping works normally. The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have signal. NO (Normal Open) contact is available on request.
5. It has a float switch that can detect the oil volume. When oil is lower than the minimum level, the float switch will automatically send a continuous signal.
6. It has a pressure gauge where an operator can check the pressure easily.
7. Do not press the force feed-oil (F button) more than three minutes in order to avoid overloading. When the temperature reaches 100℃, the sensor will be on to stop the motor continuing running about 5 minutes.
8. It can be used for the machines requiring strictly rationing oil flow. It is usually used for such as processing machines or projecting machines.
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
Product Description :
1. KGC and KGCP types are suitable for grease NLGI grades 000, 00 and 0.
2. Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir.
3. KGC and KGCP types are controlled by PLC (Programmable Logic Controller). It can work with CV type Progressive Feeders which can supply fixed volume of grease. CV type Progressive Feeders can assure each of lubrication point has equal amount of grease.
4. Pressure switch can be added on request for checking if the piping works normally. The standard setting is at 60 bars and the standard specification is NC (Normally Closed) contact, which means if the pressure doesn't reach the default setting, it sends continuous signals. NO (Normally Open) contact is available on request.
5. Magnet Level Switch is also an optional accessory that can be added upon request. It sends continuous signal automatically when the grease level is lower than the minimum level.
6. For the first time use, slightly press the Feed button (F button) to feed grease immediately. F button can be used as manually grease feeding for no more than 3 minutes.
7. AC110V and AC220V motors have thermal controls. When the motor temperature reaches 100℃, the sensor will be on to stop the motor continue running about 5 minutes.
8. It has a pressure gauge that the operator can check the pressure easily.
9. It can be used for the machines requiring strictly rationing grease flow. It usually works with rubber or plastic machines, press machines, machine centers, woodworking machines, etc.
FUTECH PRECISION CO.,LTD.
Product Description :
Ultra-short, large-diameter rotary hydraulic cylinder, lightweight design, more stable performance during high rotation, reducing spindle load.
The built-in safety self-locking valve ensures the pressure is immediately maintained during abnormal power outage and the built-in pressure relief valve.
Dual-purpose type, can be installed by the front and rear ends.
WEXTEN PRECISE INDUSTRIES CO., LTD.
Product Description :
■Single refrigerant circuit is with multiple oil circuits, and it provides independent flow rate and pressure precisely.
■ Different liquids can be controlled temperature at the same time,and it can be customized.
■ Temperature control of Dual-PCB for each of plural circuits and it can adjust temperature individually.
■ It has temperature compensation and preheated function.
■ Temperature control precision is +0.5~1.5 ㆍC. (It can be customized of other temperature control precision.)
■ Saving about 50% of floor space.
■ Using high-efficiency environmental refrigerant and without pollution.
■ Up-to 95% materials of machine are recyclable and eco-friendly.
WEXTEN PRECISE INDUSTRIES CO., LTD.
Product Description :
■ Full series of inverter compressors are smooth start. There is no-start instantaneous high current and saving power more than 33%.
■ Unique design of multi-function LCD panel and it's provides -0.10°C temperature control stabilization.
■ There are 15 malfunction protection to ensure normal operation of cooler.
■ When low heating load is happend,the cooler will operate in low load mode and combined accurate temperature control and energy saving.
■ Groove recessed panel design is reducing oil mist infiltration into electrical control unit.
■ Using high-efficiency heat exchanger to enhance cooling efficiency.
■ Using high-efficiency environmental refrigerant and without pollution.
■ Up-to 95% materials of machine are recyclable and eco-friendly.
RAISE PRECISION CO., LTD.
Product Description :
Capacitive switches with touch sensor technology
The first capacitive switches with touch sensor technology from CAPTRON were used in 1994 for public transportation. Today, CAPTRON offers a wide range of capacitive SENSORswitches for various industries and applications where unconditional reliability, durability, comfort and design are required.
If necessary, SENSORswitches from the standard range can be tailored and modified optically and technically to meet individual customer demands.
Parjet Co.,Ltd.
Product Description :
HiPerSeal®, aka Spring Energized Seal and Teflon Spring Seal, is a U-shaped machined performance polymer that utilizes a single spring energizer to provide force for the sealing lips. The seal jacket is made from PTFE compounds using high-performance polymer fillers to enhance overall spring seal life and wear resistance properties. The system pressure ultimately increases the sealing force and creates a leak tight seal. Because the spring loaded seal utilizes a spring, slight misalignment is tolerated, and the sealing force and jacket wear is more consistent. Spring energizers are available in corrosion resistant metal alloys such as stainless steel, Elgiloy and Hastelloy to meet the most serious corrosive and high temperature applications. We offer a wide variety of springs energizers including Canted Coil springs, Helical springs and Cantilever springs. For more information, you may refer to the tab "Spring" under "Products".
HYDROKOMP GmbH
Product Description :
Swing clamp cylinders release the clamping point on the workpiece. With this, it is easy to change the workpiece. This hydraulic swing clamp cylinder operates as single-acting or double-acting traction cylinder, whereas part of the stroke is used to rotate the piston. The model with 0° swing angle operates only vertical as traction cylinder.
To guarantee a long lifetime the cylinders have an integrated metal wiper as standard. For oil supply, the cylinders are equipped with threaded port and manifold port with O-ring for drilled channels. You can select between right or left turning models with various standardized swing angles. The integrated overload protection protects the swing mechanism from damage due blockage of the rotation or improper assembly of the clamping arm.
For any risk of exceeding the permitted volume flow a throttle check valve must be interposed into the oil supply line. Counter-hold the clamping arm when tightening or loosening the counter nut in order to prevent torque transfer to the piston rod and to avoid damage to the ball guide. Variations with 0°, 30°, 45°, 60° and 90° swing angles are available. The permitted operating pressure is depending from the clamping arm length.
