Theme
Digital Transformation
Green Transformation
HYDROKOMP GmbH
Product Description :
Swing clamp cylinders release the clamping point on the workpiece. With this, it is easy to change the workpiece. This hydraulic swing clamp cylinder operates as single-acting or double-acting traction cylinder, whereas part of the stroke is used to rotate the piston. The model with 0° swing angle operates only vertical as traction cylinder.
To guarantee a long lifetime the cylinders have an integrated metal wiper as standard. For oil supply, the cylinders are equipped with threaded port and manifold port with O-ring for drilled channels. You can select between right or left turning models with various standardized swing angles. The integrated overload protection protects the swing mechanism from damage due blockage of the rotation or improper assembly of the clamping arm.
For any risk of exceeding the permitted volume flow a throttle check valve must be interposed into the oil supply line. Counter-hold the clamping arm when tightening or loosening the counter nut in order to prevent torque transfer to the piston rod and to avoid damage to the ball guide. Variations with 0°, 30°, 45°, 60° and 90° swing angles are available. The permitted operating pressure is depending from the clamping arm length.
Parjet Co.,Ltd.
Product Description :
PTFE Glide seal sets consists of a PTFE sealing element with a rubber O-ring functioning as elastic energizer. This type of Teflon seal is mainly used to seal reciprocating rods, pistons, and plungers, commonly found in hydraulic and pneumatic applications. The required sealing effect is achieved by radial pressure, produced by the preloaded element and system pressure, on the lip against mating surface. The elastic energizer pushes the PTFE ring against the mating surface which provides the initial sealing force for the PTFE seal.
R PLUS TECHNOLOGY CO., LTD
Product Description :
Rplus pneumatic thermal cutters are designed for plastic molding and specified configuration. A designed pair of thermal knifes with a suitable heating rate, the unique design will reduce the heating time and reach the setting temperature in few seconds. The shearing is driven by a dual rod cylinder with 0.15~1Mpa range pressure.
Knifes are made by alloy special steel with heat-treatment. The heating capacity is 150W within 8mmx35mm heating bars , the range is 60~350C. The dual rod cylinder drives the thermal knifes will lead to a stable shearing effect, as well as higher efficiency, reduce the loss, faster shearing and depends on different type of plastic can be set variable heating temperature.
For modern manufacturing, we can integrate on a robot arm and automatically processing line.
Examples of widely application as head lamp of automobile,optical lens, acrylic products and Polycarbonate,etc. We forward to offer a safer , easier and efficiency tools.
FUTECH PRECISION CO.,LTD.
Product Description :
Ultra-short, high speed, light weight.
Designed with a detection device, which can be equipped with an inductive proximity switch.
Easy to adjust to ensure the correct operation of the hydraulic cylinder.
Built-in safty self-locking valve and pressure relief valve.
Dual-purpose type, can be installed by the front and rear ends.
The oil pipe must be connected to the oil pressure tank separately to avoid back pressure.
LIS AUTOMATIC CONTROLLED CO., LTD.
Product Description :
PJ-30MT is a fixed volume complex system. Controlled by the modular PCB board, provided the abnormal message notification of the system effectively. Suitable for using the fixed volume machines, such as CNC lathes, machine centers. This system integrates great advice from our countless loyal customers, and also LIS gain experiences in a broad of customers’ base developed a high-pressure coolant system for most industries when customers use the PJ system, it is more humane, easy to install, operate and maintain. Without a doubt, this is just a product of LIS which combine the suggestion from multiple parties.
Parjet Co.,Ltd.
Product Description :
HiPerSeal®, aka Spring Energized Seal and Teflon Spring Seal, is a U-shaped machined performance polymer that utilizes a single spring energizer to provide force for the sealing lips. The seal jacket is made from PTFE compounds using high-performance polymer fillers to enhance overall spring seal life and wear resistance properties. The system pressure ultimately increases the sealing force and creates a leak tight seal. Because the spring loaded seal utilizes a spring, slight misalignment is tolerated, and the sealing force and jacket wear is more consistent. Spring energizers are available in corrosion resistant metal alloys such as stainless steel, Elgiloy and Hastelloy to meet the most serious corrosive and high temperature applications. We offer a wide variety of springs energizers including Canted Coil springs, Helical springs and Cantilever springs. For more information, you may refer to the tab "Spring" under "Products".
WEXTEN PRECISE INDUSTRIES CO., LTD.
Product Description :
■All models use DC inverter compressors with smooth start-up, no instantaneous large
starting current characteristics, and low power consumption.
■When the heat load is low, the cooling unit operates at a low load, with high energy efficiency.
■The exclusive design of the multi-function LCD panel with an accuracy of ±1℃ can keep the
electric cabinet at a constant temperature, control heat sources, and improve the lifespan of
electronic components.
■ Uses environmentally friendly refrigerants with low Global Warming Potential (GWP) values.
■More than 95% of materials that can be recycled, contributing to environmental protection.
R PLUS TECHNOLOGY CO., LTD
Product Description :
1.Effectively and quickly remove water and particles
2.Easy replacement of 40μm and 5μm filter cartridges
3.Simple and accurate pressure adjustment
4.Do not turn off the air supply and stop refueling
5.Fine oil spray to ensure effective protection and extend the life of parts
6.Acid and alkali resistant cups and aluminum cups for use in volatile solvents in organic solvents and chemicals in the surrounding environment
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
Product Description :
1. CEN03 type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors. With CAB or CBB type volume distributor, oil will feed during operation time. With CDB or T type volume distributor, oil will feed during interval time.
2. The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil.
3. It has a spark-eliminator inside to prevent the sparks producing when the electric current is running. The spark-eliminator can avoid PLC (Programmable Logic Controller) being interfered.
4. CEN03 type has a pressure switch device and been set up as 8kg/cm2, which assures the oil volume of lubrication point and check if the piping works normally. The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have signal. NO (Normal Open) contact is available on request.
5. It has a float switch that can detect the oil volume. When oil is lower than the minimum level, the float switch will automatically send a continuous signal.
6. It has a pressure gauge where an operator can check the pressure easily.
7. Do not press the force feed-oil (F button) more than three minutes in order to avoid overloading. When the temperature reaches 100℃, the sensor will be on to stop the motor continuing running about 5 minutes.
8. It can be used for the machines requiring strictly rationing oil flow. It is usually used for such as processing machines or projecting machines.
DYNA COMPRESSOR CO., LTD.
Product Description :
PM MOTOR
With powerful driving core, it is more energy-saving and energy-saving
The biggest advantage of permanent magnet variable frequency air compressor is energy saving by 10%~35% in average. It depends on the working condition of the air compressor and the setting of the frequency converter.
If the air consumption fluctuates, the energy-saving effect is better. Using a high-efficiency and energy-saving control system, the starting current is small and reduce the impact on the motor and electrical components; the life of the motor is extended, and the impact on the equipment and machinery is relatively reduced.
HABOR PRECISION INC.
Product Description :
HABOR_ HIG DC Inverter Cooler_ High energy-saving X Low-carbon emission
Upgraded with new generation refrigerant_ R513A which is Low-GWP to reduce the warming influence, Habor HIG series is the best partner for green machine tools.
Habor HIG series is a DC inverter cooler integrated technologies of smart IoT, energy-saving, high-accuracy control, equipped with Ethernet Communication protocol for remote setting and real time monitoring, intelligent management of predictive maintenance and status detection.
Thanks to speed control and frequency conversion technology, HIG series can save energy cost up to 60%. In 2024, we announced new coolers which uses LOW-GWP refrigerant R513A on the base of use less refrigerant system to reduce carbon emission up to 70% .
Habor provides wide range of high precision temperature control system to machining process, such like cooling for spindles, coolant, linear motors, ball screw, gear box, hydraulic systems….etc.
Going forward Net Zero by 2050, except DC inverter cooler unit, Habor also provides various solutions to help users to save cost of factory electrical consumption. For more information, you are welcome to our booth in TMTS2024.
Habor Booth No. P0114, 1F Hall 2
