Theme
Digital Transformation
Green Transformation
CHIEN CHENS MACHINERY CO., LTD.
Product Description :
Specification
Table size: 1515 x 470 mm
Longitudinal travel: 1300 mm
Cross travel: 600 mm
A axis travel: 370 mm
Y slide way width: 720 mm
Z Slide high: MAX 700 mm
Z Slide way width: 420 mm
Spindle taper: NT#40(BT)
Spindle motor: 5HP / 4P
Spindle speed: 70~3600 RPM
Horizontal Spindle motor: 5HP / 4P
HorizontalSpindle speed: 70~3600 RPM
Feeding speed: 10~6000 mm/min
Ballscrew: Ø32 mm C5
Net weight: 3500 kgs
FUI JET TECH CO., LTD
Product Description :
The zero-point positioning system is a normal clamping mechanism, which is opened during ventilation and the air pressure is cut off. When the zero-point positioning system is ventilated, the pressure will pass through the compressed spring inside the piston, causing the piston to rise, and the steel balls can retreat toward the water pump. When the air source is turned off, the spring will push back the piston, and the piston handle will The steel ball is pushed toward the middle, causing the ladder bolt to
BENIGN ENTERPRISE CO., LTD.
Product Description :
• Selective bed width: 300 mm
• With FAG or SKF precision bearings installed on spindle, maximum cutting depth can be 8 mm on 50 mm diameter and best roundness 0.003 mm (200 mm long).
• Thermal treated and precision ground alloy gears.
• Universal gearbox for both imperial and metric thread-conversion table also attached.
• Tracks of cross slide and bed are well lubricated with lubrication pump (manual).
• CE certified
HC FENG CO., LTD.
Product Description :
Replenishing Fluid automatically, accurate cutting fluid concentration. One equipment to multiple CNC machining centers. The supply line can be as long as 20 meters.
#Filtration by 3 filters #Sterilization by ozone # Oil-water mixer to precise mixing 0-10% cutting fluid #Stirring device avoid cutting fluid become stagnant water. #oil tank level meter for 50 gallon barrel low level detection.
HEIDENHAIN CO., LTD. (TAIWAN)
Product Description :
Angle encoders for rotary and tilting axes are indispensable for machine tools on which high positioning accuracy and a high machining rate are essential. Because angle encoder measure angular motion of the axis directly and immediately. Mechanical transfer elements therefore have no influence on position measurement, both kinematics errors and the influences of forces are measured by the angle encoder and considered in the position control loop. This can eliminate a number of potential error sources: Gear errors, reversal error, errors due to deformation of the drive mechanics by machining forces.
MONGTEC PRECISION INC.
Product Description :
BODY
Re-designed main body to improve rigidity and reduce vibration. Specially treated corrosion resistant steel body.
Bearings
Angular contact preloaded ball bearings of precision class P4 / ABEC 9.
Bevel Gears
Gleason computer based calculations for the Gleason cut spiral bevel drive gears with ground teeth in order to guarantee a bigger torque.
Torque and Speed
With Speeder 1：4：32,000 Rpm
(Standard 1：1：6000~12000Rpm)
Max Torque：160Nm
Internal Coolant
Max Pressure：70-100 bar
TONGTAI MACHINE & TOOL CO., LTD.
Product Description :
‧The VP-12 combines the advantage of a smaller footprint with a large internal machining space, equipped with a high-speed spindle to meet the requirements of efficient and precise machining.
‧Direct-drive spindle BBT-40 provides a high rigidity and high efficiency.
‧The tool magazine allows for flexible tool placement and pre-selection, coupled with a high-speed ATC mechanism to reduce non-cutting time, showcasing efficiency similar to drilling and tapping machining centers.
‧High quality spindle and high rigidity structure design subject to high standards of machine accuracy to achieve good cutting performance.
‧By Tongtai production system, we check every detail process from design, manufacturing, assembly and QC.
