Theme
Digital Transformation
Green Transformation
YANMECH Industrial Co., Ltd.
Product Description :
【J Series：】
1. Adapter Plates can be selected.
2. Install side strips and chips cover sealed base jaw to prevent chips and coolant ingress.
3. The jaw can be individually operated, and irregularly shaped workpieces can be clamped.
4. Special specifications can be customized.
【L Series：】
1. Adapter Plates can be selected.
2. The jaw can be individually operated, and irregularly shaped workpieces can be clamped.
3. Special specifications can be customized.
Taiwan TeamA Tech. Co., Ltd.
Product Description :
Form 3L為 Formlabs 推出的大型光固化3D列印機，是一款成型空間達擁有達33.5*20*30cm的桌面級3D列印機，讓您的想像力不受限！採用最新專利研發的低應力光固化成型技術（LFS），擁有彈性樹脂槽與封閉式光學模組（LPU）等，大幅增加了機器的可靠與穩定性，精確度、平滑度及透度都大大增加，讓您的大物件也擁有精緻細節！搭配Form Wash L自動清洗機與Form Cure L溫控光固機，以磁力迴旋可一次清洗一個Form 3L平台或是兩個Form 3平台，並使用兩個500W加熱器與大功率紫外線燈全方位高度強化，發揮材料最佳性能！
Form 3L特色包含
1. 33.5*20*30cm 超大列印空間
2. 大型物件也有大大的細緻度
3. 彈性成型槽印大型實心物件也不怕
4. 專利LFS技術配合光學模組使透度平滑度大幅提升
5. 雙卡匣智能給料，安心列印不中斷
6. 高達20多種樹脂滿足外觀、功能驗證需求
7. 輕觸支撐材，好拆不麻煩
8. 繁體中文切片軟體PreForm超好用
Taiwan TeamA Tech. Co., Ltd.
Product Description :
建立於 Fuse 1 成功的基礎下，formlabs 推出進階款選擇性雷射燒結（Selective Laser Sintering, SLS）3D列印機 Fuse 1+30W 及粉末回收系統 Fuse Sift。提升2倍的列印速度，在3倍的雷射功率下，實現真正快速的企業內部生產！使用尼龍粉末燒結技術，搭載高轉換效率的「掺鐿光纖雷射」與專利研發技術「表面盔甲技術」（Surface Armor），讓用戶獲得更穩定的列印品質與更堅固的物件表面。
Formlabs一直以來對於人體健康與環境保護都十分重視，Fuse 1在運轉時，通過國家室內空氣品質標準，其中包含甲醛、TVOC、PM2.5、及PM10…等揮發性有機物測試，列印中不會產生有害氣體，另外也配有完善的粉末回收系統Fuse Sift。除了能將舊粉末過濾後重複使用，還可自動化混合新舊粉、自行選擇刷新比例，減去繁雜的手動混合程序，不僅環保不浪費，更能以最低耗損帶來最高產值。
【Fuse 1+30W 六大特色】
1. 16.5*16.5*30cm 超大列印空間
2. 掺鐿光纖雷射穩定的光束品質
3. 專利Surface Armor技術物件更堅固
4. 粉末回收率高、擁有自動粉末混合系統
5. 兼具高韌性、耐高溫、耐衝擊的多元性能列印材料
6. 繁體中文切片軟體PreForm超好用
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
The Thread-body single acting hydraulic cylinder use imported oil seal and accessories to guarantee the quality. No oil leakage while clamping in high pressure for a long time. The volume of the thread-body single acting hydraulic cylinder is small. It can be utilized in a small space in the fixture.
This hydraulic cylinder is used to extend out, and when spring returns, but it can't be used for pulling back.
The angle degree between the cylinder and workpiece could not be larger than 10° while installing.
The bottom of the cylinder barrel needs a leakage-proof gasket.
Max. operating pressure: 250 kgf/cm²
Min. operating pressure: 20 kgf/cm²
Single acting
Usable fluid:
FARSIGHT PRECISION CO., LTD.
Product Description :
Finished leaking testing just only 1 minute !!!
Leaking Testing Machine (Pressure testing machine)
◎ Our company could according to products request of
condition of client, design and manufacturing dry type,
wet type or dry-wet 2 ways in one leaking testing
machine.
◎ 2 workpiece finished at the same time.
◎ The client can select the "COSMO", "FUKUDA" or other
leaking testing instrument, and install user-interface
system.
◎ Attach computer storage, calculation and network output
etc...
◎ The equipment could exchange the workpiece quickly.
◎ The equipment could exchange fixtures for other
workpiece.
◎ It can set the water tank in time.
◎ The client can option to mark on workpiece with laser or
punching.
JIN YEAR PRECISION CO., LTD.
Product Description :
1.Down thrust with"semi-sphere"to prevent workpiece lift.
2.Mechanical/Hydraulic. Two operate methods.
3.Vise body is made of ductile iron FCD-60.
4.Vise bed hardened to HRC45 and maintain accuracy for long.
5.Vise bed height-size and the guide block side are all made with full control, can 2.3 or 4 vises to perform a job at a time.
6.Vise have 4 ways of clamping. For you to choice.
HAWE Hydraulik Singapore Pte. Ltd. Taiwan Branch
Product Description :
Directional seated valves are a type of directional valve. As cone valves they are tightly sealed, with zero leakage in the closed state.
The directional seated valve type ROLV is available as a 3/2, 4/2 or 4/3-way directional seated valve with different plug types. The patented assembly consists of two parts: a round basic valve with the valve inserts, and an adapter plate which can be designed for manifold mounting with nominal size NG 6 as the
standard connection pattern, or for direct pipe connection.
Additional elements such as a check valve, a restrictor (on the consumer side) and/ or restrictor check valves can be integrated, depending on the functional requirement and adapter plate. The type ROLV can be combined in the valve bank type BA with other types of valves.
Features and benefits
■ Dirt-resistant design with high switching reliability
■ Interchangeable solenoid for greater flexibility and easy servicing
Intended applications
■ Machine tools (cutting and non-cutting)
■ Clamping tools, punching tools, fixtures
■ Testing machinery
■ Wind turbines
DI CHUN IRON WORK CO., LTD.
Product Description :
Drawdown power chuck feature of radial clamping will lead to almost no workpiece uplifting displacement; for machining casting and forging part:
1. For the clamped workpiece is oppressed to the surface, chucks are suitable for heavy machining.
2. Chuck Actuators with the cylindrical structure is durable and ensures high clamping repeatability.
3. Accurate self-centering and pull back features are adequate or precise length control machining requirements.
