Theme
Digital Transformation
Green Transformation
TAI CHONG CO., LTD.
Product Description :
用途： CNC切削中心機，銑床，龍門銑床，電腦銑床等切削作業。<br />
特性：<br />
本體與面板一體成型加工完成。<br />
以電控操作，快速充脫磁場變換。<br />
以永久磁鐵吸著工件，沒有停電的危險性。<br />
吸磁作業面，螺栓孔可應用於模具及固定方式的變化。<br />
可配合彈性導磁塊，針對變形平面，作平面加工，大量節省調整時間，提高工作效率。<br />
結構剛性佳，配合精度穩定，適合高精度加工作業。<br />
與強力型電磁鐵比較，大幅度節省電力消耗。<br />
防水效果最確實，保證不漏水，不漏電。<br />
平均吸磁力18kgf/cm2以上。
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
Clamptek’s CLKA series is using the optimal designation, so the clamping capacity is higher than other cylinders. The cylinder body and the fulcrum are integrated structured. Therefore, the cylinder’s size is smaller and it’s more solid and firm.
Clamptek’s CLKA series uses special dust seals to ensure the high dust proof and high sealing performance. As for the lower flange part, which uses minimized designation, it’s suitable for the compact and light fixture.
If you have any customized requests, please feel free to contact us.
Please kindly check the suggested operating pressure as below,
Max. operating pressure: 70 kgf/cm2
Min. operating pressure: 10 kgf/cm2
JIN YEAR PRECISION CO., LTD.
Product Description :
1.Down thrust with"semi-sphere"to prevent workpiece lift.
2.Mechanical/Hydraulic. Two operate methods.
3.Vise body is made of ductile iron FCD-60.
4.Vise bed hardened to HRC45 and maintain accuracy for long.
5.Vise bed height-size and the guide block side are all made with full control, can 2.3 or 4 vises to perform a job at a time.
6.Vise have 4 ways of clamping. For you to choice.
Taiwan TeamA Tech. Co., Ltd.
Product Description :
Form 3L為 Formlabs 推出的大型光固化3D列印機，是一款成型空間達擁有達33.5*20*30cm的桌面級3D列印機，讓您的想像力不受限！採用最新專利研發的低應力光固化成型技術（LFS），擁有彈性樹脂槽與封閉式光學模組（LPU）等，大幅增加了機器的可靠與穩定性，精確度、平滑度及透度都大大增加，讓您的大物件也擁有精緻細節！搭配Form Wash L自動清洗機與Form Cure L溫控光固機，以磁力迴旋可一次清洗一個Form 3L平台或是兩個Form 3平台，並使用兩個500W加熱器與大功率紫外線燈全方位高度強化，發揮材料最佳性能！
Form 3L特色包含
1. 33.5*20*30cm 超大列印空間
2. 大型物件也有大大的細緻度
3. 彈性成型槽印大型實心物件也不怕
4. 專利LFS技術配合光學模組使透度平滑度大幅提升
5. 雙卡匣智能給料，安心列印不中斷
6. 高達20多種樹脂滿足外觀、功能驗證需求
7. 輕觸支撐材，好拆不麻煩
8. 繁體中文切片軟體PreForm超好用
