Search List
FARSIGHT PRECISION CO., LTD.
Booth Number :
Product Description :
ZeroClamp原點夾持快換系統之優異特性:
◎操作簡單、易於上手。
◎沒有定位突塊，安全不干涉。
◎氣壓驅動放鬆(只要5.5bar)，無需額外的油壓單元。
◎只用一種夾持拉栓，設計與使用簡單。
◎不受熱型變影響。
◎HSK兩面拘束設計，高抗震與高精度，
重現性達2.5μm以內。
◎適用於各種機器上使用, 亦適合於量床上使用。
◎最傑出的性能價格比。
CLAMPTEK ENTERPRISE CO., LTD.
Booth Number :
Product Description :
＊High supporting force
CSP-P/ CSP-K increases the holding force between the piston rod and the inner jacket to arise the higher supporting force.
＊Coolant cleaning measures
In order to prevent the malfunction from the intrusion of high-pressure coolant and the cutting dust entering the internal structure, air can be cleaned at the breathing port when replacing the workpiece. Air cleaning requires a dedicated air circuit. (recommended cleaning pressure is 0.3 - 0.5MPa).
＊Universal piping base
CSP-P/ CSP-K piping base is interchangeable, which can be installed with other low-pressure cylinders in the same specifications.
HUI BAO ENTERPRISE CO.,LTD
Booth Number :
Product Description :
FEATURES：
Able to clamp the workpiece from both inside and outside, apply for embedded sensor, two directions inlet
APPLICATION：
CNC loading and unloading the workpiece, jigs and fixture
JIN YEAR PRECISION CO., LTD
Booth Number :
Product Description :
Features:
1.Pressure Constant. Clamping force can presetting, repeat use the same clamping force.
2.Vise body is made of ductile iron FCD-60.
3.Vise bed hardened to HRC45° and maintain accuracy for long.
4.Vise body height-size and the guide block side are all made with full control, can 2、3 or 4 vises to perform a job at a time.
5.The length of vise body is very short, but the clamping range is very big. It works with every kind of milling machine, CNC machine center.....
EARTH-CHAIN ENTERPRISE CO., LTD.
Booth Number :
Product Description :
1.Suitable for move plate steel, block steel and round steel, such as machine parts, press molds, plastic molds and iron material .....etc.
2.Made by “Rare Earth” magnet with technology of improvement.
3.All new models with “light weight” “less dimension” and “lower price”.
4.Made by permanent magnet, require no power supply, thus eliminating hazards due to failure wiring system as electric type.
5.It features powerful magnetic force, with 3.5 times safety coefficient makes more safety in use.
UNITIDE INDUSTRIAL CO., LTD.
Booth Number :
Product Description :
與傳統的機械螺紋鎖固方式相比，Loctite®樂泰螺絲固定劑的優勢
● 防止意外的移動、鬆脫、洩漏和腐蝕
● 螺紋密封，可以使用在通孔的密封
● 單液型，容易施膠及清除
● 可以應用在所有型號的緊固件上，降低庫存成本
● 抗震動
Protool Industrial Corp.
Booth Number :
Product Description :
Drilling length can achieve up to D x 250.
Excellent hole straightness and concentricity.
Excellent surface quality.
Easy regrinding.
CLAMPTEK ENTERPRISE CO., LTD.
Booth Number :
Product Description :
The Thread-body single acting hydraulic cylinder use imported oil seal and accessories to guarantee the quality. No oil leakage while clamping in high pressure for a long time. The volume of the thread-body single acting hydraulic cylinder is small. It can be utilized in a small space in the fixture.
This hydraulic cylinder is used to extend out, and when spring returns, but it can't be used for pulling back.
The angle degree between the cylinder and workpiece could not be larger than 10° while installing.
The bottom of the cylinder barrel needs a leakage-proof gasket.
Max. operating pressure: 250 kgf/cm²
Min. operating pressure: 20 kgf/cm²
Single acting
Usable fluid:
SAFEWAY MACHINERY INDUSTRY CORPORATION
Booth Number :
Product Description :
Material : FCD 600~60 kgs/mm2 Ductile Iron ( high tensile casting )
WEI-SHIN PRECISE CO.,LTD.
Booth Number :
Product Description :
1.Suitable for use on CNC Milling Machine (Horizontal Spindle), CNC Milling machine (Vertical Spindle), Plano Milling Machine, Vertical Lathe and Grindering Machine ...etc.
2.Powerful magnetic force up to 1300kg / 100cm² (4-poles ).
3.Electricity-saving; electricity needed only for magnetization and demagnetization.
4.Quickly load and unload workpiece, more fixed than clamp plate saving 50% of time.
5.Stable and excellent Magnetic Chuck, it could be used for long time and never get hight temperatures to affect the accuracy of workpieces.
6.The controllers can be adjusted by way of different shifts, and can cope with processing of thick and thin pieces.
7.The hole piercing and five-sided processing can be conducted based on different situations upon the choice of induction block.
8.Customization of magnetic chuck is acceptable.
Asmith Manufacturing Company
Booth Number :
Product Description :
Spring Loaded Draw Latch ｜The proposed load of 22~50 kgf.
Both sides spring design with compression function.
Standard Lock-hole can using with lock. Suitable for vibration equipment.
Smooth surface, excellent brushed finish appearance, in accordance with RoHS.
The draw latch is including the horizontal keeper [CS(T)-0120-2 or CS(T)0130-2], if you need another type keeper then you can reference the below "Accessories".
➤Material: SUS304(Stainless steel)-vibration ground and brushed finish, SPCC(cold-rolled steel)-zinc plated
