Theme
Digital Transformation
Green Transformation
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
Clamptek’s CLF5H series designed with connecting rod structure which can operate conveniently. CLF5H series can also reduce the interference with loading and unloading operation, because when CLF5H series is in the unclamping state, it’s clamping arm can be put lower than holding position.
Clamptek’s CLF5H series’ clamping arm is very flexible. By reducing the interference of the surrounding equipment, CLF5H series can save lots of working space.
Clamptek’s CLF5H series equipped with special dust proof design and high sealing, which can prevent the cutting chips and coolant to infiltration. Therefore, CLF5H series can be used in more severe conditions.
Please kindly check the suggested operating pressure as below,
Max. operating pressure: 70 kgf/cm2
Min. operating pressure: 10 kgf/cm2
Taiwan TeamA Tech. Co., Ltd.
Product Description :
formlabs 熱銷光固化機種 Form 3+/3B+ 搭載專利研發「低應力光固化成型技術（LFS）」，其特色包含彈性樹脂槽與封閉式光學模組（LPU）等，雷射光可垂直照射到物件，大幅增加機器的可靠與穩定性，可印出高精確度、平滑度及透度更佳的高品質物件，桌面級的機種，也能達到工業級的效果。
搭配上為 Form 3+/3B+ 量身打造的後處理設備－自動清洗機 Form Wash 及恆溫光固機 Form Cure，提供完整、快速的 3D 列印製造流程。
Form 3+ 六大特色包括：
1. 前所未有的表面精細度
2. 極平滑的物件表面與透度
3. 彈性樹脂槽使成功率大增
4. 遠端列印超easy
5. 無與倫比的30多種多元樹脂材料
6. 輕觸支撐材帶來最佳效率
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
＊High supporting force
CSP-P/ CSP-K increases the holding force between the piston rod and the inner jacket to arise the higher supporting force.
＊Coolant cleaning measures
In order to prevent the malfunction from the intrusion of high-pressure coolant and the cutting dust entering the internal structure, air can be cleaned at the breathing port when replacing the workpiece. Air cleaning requires a dedicated air circuit. (recommended cleaning pressure is 0.3 - 0.5MPa).
＊Universal piping base
CSP-P/ CSP-K piping base is interchangeable, which can be installed with other low-pressure cylinders in the same specifications.
JIN YEAR PRECISION CO., LTD.
Product Description :
1.Down thrust with"semi-sphere"to prevent workpiece lift.
2.Mechanical/Hydraulic. Two operate methods.
3.Vise body is made of ductile iron FCD-60.
4.Vise bed hardened to HRC45 and maintain accuracy for long.
5.Vise bed height-size and the guide block side are all made with full control, can 2.3 or 4 vises to perform a job at a time.
6.Vise have 4 ways of clamping. For you to choice.
Taiwan TeamA Tech. Co., Ltd.
Product Description :
建立於 Fuse 1 成功的基礎下，formlabs 推出進階款選擇性雷射燒結（Selective Laser Sintering, SLS）3D列印機 Fuse 1+30W 及粉末回收系統 Fuse Sift。提升2倍的列印速度，在3倍的雷射功率下，實現真正快速的企業內部生產！使用尼龍粉末燒結技術，搭載高轉換效率的「掺鐿光纖雷射」與專利研發技術「表面盔甲技術」（Surface Armor），讓用戶獲得更穩定的列印品質與更堅固的物件表面。
Formlabs一直以來對於人體健康與環境保護都十分重視，Fuse 1在運轉時，通過國家室內空氣品質標準，其中包含甲醛、TVOC、PM2.5、及PM10…等揮發性有機物測試，列印中不會產生有害氣體，另外也配有完善的粉末回收系統Fuse Sift。除了能將舊粉末過濾後重複使用，還可自動化混合新舊粉、自行選擇刷新比例，減去繁雜的手動混合程序，不僅環保不浪費，更能以最低耗損帶來最高產值。
【Fuse 1+30W 六大特色】
1. 16.5*16.5*30cm 超大列印空間
2. 掺鐿光纖雷射穩定的光束品質
3. 專利Surface Armor技術物件更堅固
4. 粉末回收率高、擁有自動粉末混合系統
5. 兼具高韌性、耐高溫、耐衝擊的多元性能列印材料
6. 繁體中文切片軟體PreForm超好用
