Theme
Digital Transformation
Green Transformation
Taiwan TeamA Tech. Co., Ltd.
Product Description :
Form 3L為 Formlabs 推出的大型光固化3D列印機，是一款成型空間達擁有達33.5*20*30cm的桌面級3D列印機，讓您的想像力不受限！採用最新專利研發的低應力光固化成型技術（LFS），擁有彈性樹脂槽與封閉式光學模組（LPU）等，大幅增加了機器的可靠與穩定性，精確度、平滑度及透度都大大增加，讓您的大物件也擁有精緻細節！搭配Form Wash L自動清洗機與Form Cure L溫控光固機，以磁力迴旋可一次清洗一個Form 3L平台或是兩個Form 3平台，並使用兩個500W加熱器與大功率紫外線燈全方位高度強化，發揮材料最佳性能！
Form 3L特色包含
1. 33.5*20*30cm 超大列印空間
2. 大型物件也有大大的細緻度
3. 彈性成型槽印大型實心物件也不怕
4. 專利LFS技術配合光學模組使透度平滑度大幅提升
5. 雙卡匣智能給料，安心列印不中斷
6. 高達20多種樹脂滿足外觀、功能驗證需求
7. 輕觸支撐材，好拆不麻煩
8. 繁體中文切片軟體PreForm超好用
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
Clamptek’s CLF5H series designed with connecting rod structure which can operate conveniently. CLF5H series can also reduce the interference with loading and unloading operation, because when CLF5H series is in the unclamping state, it’s clamping arm can be put lower than holding position.
Clamptek’s CLF5H series’ clamping arm is very flexible. By reducing the interference of the surrounding equipment, CLF5H series can save lots of working space.
Clamptek’s CLF5H series equipped with special dust proof design and high sealing, which can prevent the cutting chips and coolant to infiltration. Therefore, CLF5H series can be used in more severe conditions.
Please kindly check the suggested operating pressure as below,
Max. operating pressure: 70 kgf/cm2
Min. operating pressure: 10 kgf/cm2
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
Clamptek’s CLKA series is using the optimal designation, so the clamping capacity is higher than other cylinders. The cylinder body and the fulcrum are integrated structured. Therefore, the cylinder’s size is smaller and it’s more solid and firm.
Clamptek’s CLKA series uses special dust seals to ensure the high dust proof and high sealing performance. As for the lower flange part, which uses minimized designation, it’s suitable for the compact and light fixture.
If you have any customized requests, please feel free to contact us.
Please kindly check the suggested operating pressure as below,
Max. operating pressure: 70 kgf/cm2
Min. operating pressure: 10 kgf/cm2
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
The Thread-body single acting hydraulic cylinder use imported oil seal and accessories to guarantee the quality. No oil leakage while clamping in high pressure for a long time. The volume of the thread-body single acting hydraulic cylinder is small. It can be utilized in a small space in the fixture.
This hydraulic cylinder is used to extend out, and when spring returns, but it can't be used for pulling back.
The angle degree between the cylinder and workpiece could not be larger than 10° while installing.
The bottom of the cylinder barrel needs a leakage-proof gasket.
Max. operating pressure: 250 kgf/cm²
Min. operating pressure: 20 kgf/cm²
Single acting
Usable fluid:
HAWE Hydraulik Singapore Pte. Ltd. Taiwan Branch
Product Description :
Directional seated valves are a type of directional valve. As cone valves they are tightly sealed, with zero leakage in the closed state.
The directional seated valve type ROLV is available as a 3/2, 4/2 or 4/3-way directional seated valve with different plug types. The patented assembly consists of two parts: a round basic valve with the valve inserts, and an adapter plate which can be designed for manifold mounting with nominal size NG 6 as the
standard connection pattern, or for direct pipe connection.
Additional elements such as a check valve, a restrictor (on the consumer side) and/ or restrictor check valves can be integrated, depending on the functional requirement and adapter plate. The type ROLV can be combined in the valve bank type BA with other types of valves.
Features and benefits
■ Dirt-resistant design with high switching reliability
■ Interchangeable solenoid for greater flexibility and easy servicing
Intended applications
■ Machine tools (cutting and non-cutting)
■ Clamping tools, punching tools, fixtures
■ Testing machinery
■ Wind turbines
ASMITH MANUFACTURING COMPANY
Product Description :
Spring Loaded Draw Latch ｜The proposed load of 22~50 kgf.
Both sides spring design with compression function.
Standard Lock-hole can using with lock. Suitable for vibration equipment.
Smooth surface, excellent brushed finish appearance, in accordance with RoHS.
The draw latch is including the horizontal keeper [CS(T)-0120-2 or CS(T)0130-2], if you need another type keeper then you can reference the below "Accessories".
➤Material: SUS304(Stainless steel)-vibration ground and brushed finish, SPCC(cold-rolled steel)-zinc plated
