Theme
Digital Transformation
Green Transformation
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
The Thread-body single acting hydraulic cylinder use imported oil seal and accessories to guarantee the quality. No oil leakage while clamping in high pressure for a long time. The volume of the thread-body single acting hydraulic cylinder is small. It can be utilized in a small space in the fixture.
This hydraulic cylinder is used to extend out, and when spring returns, but it can't be used for pulling back.
The angle degree between the cylinder and workpiece could not be larger than 10° while installing.
The bottom of the cylinder barrel needs a leakage-proof gasket.
Max. operating pressure: 250 kgf/cm²
Min. operating pressure: 20 kgf/cm²
Single acting
Usable fluid:
BEST DIAMOND INDUSTRIAL CO., LTD.
Product Description :
[AR-800 旗艦多功能型]
Multi-function Flagship Type
*With the most advanced design that provides the
multi-function of Ultrasonic, Brush DC (direct-current) and
Brushless DC output.
*All new design with high-efficiency microprocessor that
give the machine with perfect performance.
*The brushless DC with max. 250 watts and brush DC with
max. 150 watts output power that gives your handpiece
with high torque and high speed running.
*The LED speed display shows you the running speed of
brushless hanpiece. You can select the best and safe speed
according to various tools and diameter.
*Once turn on the machine, the system will automatically
adjust the speed to “Zero”, that keep you away from
the damage caused by high speed running of handpiece.
[AR-108 單功能型]
Single Function Practical Type
*Ultrasonic lapping function only.
*The machine provides reliable quality and good
performance.
*Max.40 watts output that satisfy difference of
polishing works.
*It is not only effective for lapping task, but also good for
correction of PCB patterns.
ASMITH MANUFACTURING COMPANY
Product Description :
Spring Loaded Draw Latch ｜The proposed load of 22~50 kgf.
Both sides spring design with compression function.
Standard Lock-hole can using with lock. Suitable for vibration equipment.
Smooth surface, excellent brushed finish appearance, in accordance with RoHS.
The draw latch is including the horizontal keeper [CS(T)-0120-2 or CS(T)0130-2], if you need another type keeper then you can reference the below "Accessories".
➤Material: SUS304(Stainless steel)-vibration ground and brushed finish, SPCC(cold-rolled steel)-zinc plated
FARSIGHT PRECISION CO., LTD.
Product Description :
Finished leaking testing just only 1 minute !!!
Leaking Testing Machine (Pressure testing machine)
◎ Our company could according to products request of
condition of client, design and manufacturing dry type,
wet type or dry-wet 2 ways in one leaking testing
machine.
◎ 2 workpiece finished at the same time.
◎ The client can select the "COSMO", "FUKUDA" or other
leaking testing instrument, and install user-interface
system.
◎ Attach computer storage, calculation and network output
etc...
◎ The equipment could exchange the workpiece quickly.
◎ The equipment could exchange fixtures for other
workpiece.
◎ It can set the water tank in time.
◎ The client can option to mark on workpiece with laser or
punching.
Taiwan TeamA Tech. Co., Ltd.
Product Description :
擺脫時間、地點的限制，利用自動化生產解決方案再創生產率新高！無需人工操作，24小時不停機生產，製造大量、高質量物件，使用 Formlabs 自動化解決方案（包含 Form Auto、群機管理和高容量樹脂系統），在 3D 列印工作流程中更高效的工作並重新定義生產能力。在不增加列印機管理複雜性的情況下擴展您的零件生產。從任何地方點擊發送，Formlabs 自動化解決方案將處理剩下的工作流程。
【最大程度地降低每個零件的成本，節省高達 80% 的勞動力】
在 Form Auto 出現之前，每個完成的零件都需要在後處理之前從成型平台上手動移除。Form Auto 透過將 Formlabs 獲得專利的「快速剝離技術」與「成型平台 V2 」結合使用，完全自動化地移除零件。蒐集的零件被放置在防紫外線的容器中，無縫批量轉移到 Form Wash。
【24 小時不間斷 3D 列印，無需額外程序】
Form Auto 自動化生產系統旨在不閒置列印機、不讓列印物件在序列中等待，無論現場是否有操作人雃，Form Auto 始終準備好開始下一次列印。 隨時隨地構建多列印機群，從辦公室點擊「列印」，立即在生產間開始生產。透過群機管理中的圖像和影片遠程監控和審查成品零件，設備內相機在完成時捕獲每個列印件來保存每個部分的記錄。
YANMECH Industrial Co., Ltd.
Product Description :
【A Series：】
1. The jaw can be individually operated, and irregularly shaped workpieces can be clamped.
2. Install side strips and chips cover sealed base jaw to prevent chips and coolant ingress.
【D Series：】
1. Install side strips and chips cover sealed base jaw to prevent chips and coolant ingress.
2. Adapter Plates can be selected.
3. The base jaw is lower than the body surface and can be used for multipurpose.
4. Alternative spindle adaptors:
ASA or DIN adaptors can be supplied as requested.
HOMGE MACHINERY IND. CO., LTD.
Product Description :
1) Patented stud bolt seat design can efficiently calibrate the clamping center.
2) It is recommended to operate with a Master Plate on a five-axis machine.
3) Compatible with Robotic Arms.
Product Data:
1.Vise body is made of High quality Steel (S50C) and its slideways gone through high-frequency hardening to achieve HRC50, which makes the whole part durable.
2.Detachable jaws are made of High quality Tool Steel (SCM440) and gone through carburizing to achieve HRC55. Since both sides are fixed size and able to be used as a datum, users can reverse them to increase clamping range.
3.The vise's clamping force can achieve 1300KG, the repeatability positioning precision of its clamping center is within ±0.02mm.
4.Users can calibrate the clamping center of vise by adjusting the screws on both ends.
5.The 45° dovetail structure with teeth on the upper jaw ensures the bottom of the workpiece to be firmly clamped.
6.Applications: precision machining of four-axis, five-axis, CNC indexing table and vertical and horizontal CNC milling machines.
BEST DIAMOND INDUSTRIAL CO., LTD.
Product Description :
All New BESDIA® Ceramic Fiber Stone use the special ceramic fibers combinated with the unique bonding material and manufacturing process. Compare to other brand :
1. Our improvements in production processes give better tensile strength to the stones, hence fewer breakages.
2. A polishing efficiency increase of 10% to 20% has been achieved.
3. Durability under the same working conditions has been increased by 10% to 30%.
