Theme
Digital Transformation
Green Transformation
7-LEADERS CORP.
Product Description :
Multipurpose End Mills- 4 Flutes
Effectively decrease the vibration by various helix geometry and unequal flutes designs.
Big chip breaker is designed to reach high removal rate for various work materials.
Obviously improve tool life with Nano multilayer coating AlTiCrN.
Suitable for different kinds of materials cutting.
NINE-9 CUTTING TOOLS CO., LTD.
Product Description :
Nine9 chamfer mill is designed for chamfering and countersinking with an indexable insert.
The insert is a specifically designed for use in high speed machining ; the multiple flutes
provide for increased feed rate, optimizing performance and reducing cutting time.
High performance chamfer tool for upgrading your machining process.
For front and back chamfering. Eliminates 2nd operation or deburring time.
● Excellent Repeatability
• Smallest Indexable counter sink, diameter ø7 mm.
• The insert is dual-relief angle, specially edge honning and optimized coated for high cutting speed.
• Optimized the number of teeth on the holder to achieve higher feed rate.
● Economical
• Each insert has 4 cutting edges.
• Long tool life.
● Applications
• For front and back chamfering.
• 90° counter sink and 45° chamfering.
• For counter sink, circular chamfering, contour chamfering and face milling.
NINE-9 CUTTING TOOLS CO., LTD.
Product Description :
NC Helix Drill cuts material by helical interpolation; serrated cutting edge minimizes chip length.
Low spindle power is not a problem, good for drilling material that generates long, soft chips.
● Reduce Your Tool Inventory
Each holder can machine di erent diameters and hole depths, saving your tool inventory and cost!
No need to peck drill or dwell in operation even machine without internal coolant.
● Lower spindle power consumption Easy to cut!
• Thanks to the small cutting load of the serrated cutting edge and helical interpolation lower power consumption. Work quicker, smarter and achieve better results.
• Circular ramping milling, maximum ramping angle is 20°. For example: tool HD27 machining Ø50 mm hole, 9 mm pitch for aluminum, 6 mm pitch for carbon steel.
● Special insert geometry - exceptional swarfs control.
• Serrated cutting edge makes the chips short and small, and easier to evacuate.
• Eliminate swarf and vibration problems while drilling di cult material or deeper holes.
● “One tool” performs multiple applications
• Not only a drill, but an end mill too.
• Small radius path to cut a hole or step hole, various curved cavity shapes on di erent materials.
JIN LI CHENG CUTTING TOOL CO., LTD.
Product Description :
向全球使用金利成刀具的加工航太客戶，深深感謝。
JLC為全球客戶開發了多款加工鈦與WASPALOY及鎳基材料的經典刀款，獲得客戶的持續讚賞與肯定，我們也因為航太客戶的持續互動，一直追求創新與進步。
航空零部件不僅採用了很多新結構、新技術和新材料，零件也越來越講求精密與材料合適性。為了讓客戶在航太的加工上，有更多元的因應方式，我們正式推出新設計的航太特殊材料用刀– AP系列。
整體子彈流動力學的設計理念，與一貫的優質歐系棒材，再搭配更勝一般鈦矽的複合及類鑽鍍層，經過廠內多次的實驗，AP航太系列刀具，絕對讓您面對航太材料加工上游刃有餘。
歡迎全球客戶指教，金利成再次感謝您的支持。
NINE-9 CUTTING TOOLS CO., LTD.
Product Description :
This is a revolutionary new concept of engraving tools with indexable carbide inserts. They offer you the ability to produce HIGH QUALITY ENGRAVING in most materials.
The latest coated carbide grades help you to obtain higher speed and feed rate, dramatically reducing your cycle time.
● High Positive Rake Angle
• Indexable insert.
• Suitable for engraving all types of materials, such as plastic, non-ferrous metal, aluminum, copper, carbon steel and stainless steel.
● Multi-Side Grinding
• Full peripherally ground insert to ensure efficient repeatability.
• It performs excellently without producing any burrs, especially in copper, aluminum and stainless steel.
● High Speed, High Feed Rate
• Designed to run at high speed, up to 40,000 r.p.m.
• Feed rate 0.08mm (0.003”) / rev. apply to aluminum; 0.05mm (0.002”) / rev. apply to stainless steel.
• Reduces engraving cycle time!
● Economical
• Each indexable insert has 2 cutting edges.
• No resharpening required. Tool length is unchanged.
• No need to reset after changing insert or cutting edge.
• Excellent repeatability!
VISION WIDE TECH CO., LTD.
Product Description :
GSF Series 5-axis Gantry Type Machining Center, provided excellent 5-axis simultaneous accuracy performance for 5-axis machining in mold cutting, highly precise contour finishing, milling, drilling, and tapping. Vision Wide manufactured the 5-axis machining center to shorten tool displacement travel and cutting process effectively, and to extend tool lifetime and offer the best choice for composite angle machining. GSF Series had excellent dynamic performance on one-piece structural and equipped high accuracy 2-axis head to achieve 5-axis simultaneous accuracy performance.
•Continuous 2-axis head
•5 axis dynamic rotation synchronization accuracy (TCPM) 0.04mm.
•Built-in Spindle Direct-Driven on B&C axis, 12,000~24,000rpm spindle speed.
•Backlashless driving on B/C axis，Rotation Positioning accuracy ±5”.
•Low table height, closer operating zone, wider door width are convenient design for user.
•Chain type chip conveyor (standard) is able to remove iron chips efficiently.
MAROX TOOLS INDUSTRIAL CO., LTD.
Product Description :
【External Turning Tools with coolant】
AACLN、AATJN、AATQN、AAWLN、ADCLN、ADDJN、ADDQN、ADTEN、ADTJN、ADTQN、ADVJN、ADWLN、AMCLN、AMDJN、AMTJN、AMVJN、APCLN、ASCLC、ASDNC、ASDJC、ASTUP、ASVJB、ASVJC、ASVJP、ASVKB、ASVKC、ATJNR、AWLNR
【Boring Bar with coolant】
L-SCLC-V、L-SDUC-V、L-STLC-V、L-STUP-V
【Threading Tools with coolant】
ASER、ASER-WP、ASER-NA
【Grooving holder with coolant】
ACGWS、AEVSC/M、ADGT、AGHR、AGNDMR、AGHSR、AGWC、AKGD、ASLAL-38、ATGTR、ATSE、ATTE、AWGCSM、AUASR、AUSR
HON JAN CUTTING TOOLS CO., LTD.
Product Description :
●Internal and external threading for both left-thread and right-thread with one tooling
●Safe machining operation and easier to reach the bottom inside the blind holes
●Evacuate the chip more efficiently than the traditional milling process. shank: 20mm~40mm , Internal Thread Insert: 12I , 14I, 21I, 30I , 40I , External Thread Insert: 14E, 21E, 30E , 40E
VISION WIDE TECH CO., LTD.
Product Description :
One of the proudest products of Vision Wide which fulfills automatic 5-face machining with super rigidity structure and high positioning accuracy. HF satisfies demands in mold surface cutting, angle cutting, 3D mold cutting, and precise contour finishing.
