Theme
Digital Transformation
Green Transformation
NINE-9 CUTTING TOOLS CO., LTD.
Product Description :
This is a revolutionary new concept of engraving tools with indexable carbide inserts. They offer you the ability to produce HIGH QUALITY ENGRAVING in most materials.
The latest coated carbide grades help you to obtain higher speed and feed rate, dramatically reducing your cycle time.
● High Positive Rake Angle
• Indexable insert.
• Suitable for engraving all types of materials, such as plastic, non-ferrous metal, aluminum, copper, carbon steel and stainless steel.
● Multi-Side Grinding
• Full peripherally ground insert to ensure efficient repeatability.
• It performs excellently without producing any burrs, especially in copper, aluminum and stainless steel.
● High Speed, High Feed Rate
• Designed to run at high speed, up to 40,000 r.p.m.
• Feed rate 0.08mm (0.003”) / rev. apply to aluminum; 0.05mm (0.002”) / rev. apply to stainless steel.
• Reduces engraving cycle time!
● Economical
• Each indexable insert has 2 cutting edges.
• No resharpening required. Tool length is unchanged.
• No need to reset after changing insert or cutting edge.
• Excellent repeatability!
VISION WIDE TECH CO., LTD.
Product Description :
GSF Series 5-axis Gantry Type Machining Center, provided excellent 5-axis simultaneous accuracy performance for 5-axis machining in mold cutting, highly precise contour finishing, milling, drilling, and tapping. Vision Wide manufactured the 5-axis machining center to shorten tool displacement travel and cutting process effectively, and to extend tool lifetime and offer the best choice for composite angle machining. GSF Series had excellent dynamic performance on one-piece structural and equipped high accuracy 2-axis head to achieve 5-axis simultaneous accuracy performance.
•Continuous 2-axis head
•5 axis dynamic rotation synchronization accuracy (TCPM) 0.04mm.
•Built-in Spindle Direct-Driven on B&C axis, 12,000~24,000rpm spindle speed.
•Backlashless driving on B/C axis，Rotation Positioning accuracy ±5”.
•Low table height, closer operating zone, wider door width are convenient design for user.
•Chain type chip conveyor (standard) is able to remove iron chips efficiently.
NINE-9 CUTTING TOOLS CO., LTD.
Product Description :
NC Helix Drill cuts material by helical interpolation; serrated cutting edge minimizes chip length.
Low spindle power is not a problem, good for drilling material that generates long, soft chips.
● Reduce Your Tool Inventory
Each holder can machine di erent diameters and hole depths, saving your tool inventory and cost!
No need to peck drill or dwell in operation even machine without internal coolant.
● Lower spindle power consumption Easy to cut!
• Thanks to the small cutting load of the serrated cutting edge and helical interpolation lower power consumption. Work quicker, smarter and achieve better results.
• Circular ramping milling, maximum ramping angle is 20°. For example: tool HD27 machining Ø50 mm hole, 9 mm pitch for aluminum, 6 mm pitch for carbon steel.
● Special insert geometry - exceptional swarfs control.
• Serrated cutting edge makes the chips short and small, and easier to evacuate.
• Eliminate swarf and vibration problems while drilling di cult material or deeper holes.
● “One tool” performs multiple applications
• Not only a drill, but an end mill too.
• Small radius path to cut a hole or step hole, various curved cavity shapes on di erent materials.
DEEP JET INDUSTRY CO., LTD.
Product Description :
1. Use in high speed machining and hard workpiece machining. It improves the quality and machining speed which is the best choice for precision processing.
◆Carbide Asymmetric Corner Radius End Mill (Steel)-Asymmetric helix angle 40º/42º and unequal flute design to effectively reduce the vibration rate and increase the tool's stability.
◆Carbide Asymmetric End Mill (Aluminum)- Reinforced asymmetric 50/50.5/51 and unequal flute design to effectively reduce the vibration rate and increase the tool's stability. This makes the surface smoother.
◆Carbide Asymmetric End Mill (Steel)-Reinforced asymmetric 36º/38 º design with special grinding technique to reach better surface roughness. Avoid vibration problem during machining and increase tool's stability.
◆Carbide Asymmetric End Mill (Aluminum)- Reinforced asymmetric 44.5º/45º/45.5º design with special grinding technique to reach better surface roughness. Avoid vibration problem during machining and increase tool's stability.
CHIN MING PRECISION TOOLS CO., LTD.
Product Description :
★ For titanium alloy, stainless steel and alloy steel(≦45°HRC) machining.
★ Chattering is decreased dramatically with unequal flute spacing ＆ nonequivalent helix angle, increase processing speed and stability.
★ Circular flute design for better chip disposal, reduces chip packing, release stress and improving rigidity of the tool.
★ Use for roughing cutting, semi finishing, finishing.
NKO TOOL INC.
Product Description :
End mills for Mould making.
For high-speed machining of Mould and Die materials.
LIN PONG TRADING CO., LTD.
Product Description :
BIG以精良優越的技術與不斷的研發創新的精神，製造高品質的產品提供給廣大的愛用者使用。
產品計有刀把系類、切削刀具系類、效率化系列、感測與量測系列、週邊設備等，種類齊全，可因應各類型的客戶的需求。
CHIN MING PRECISION TOOLS CO., LTD.
Product Description :
★ Single Crystal Diamond(Ultra Precision Cutting)：
【CVD- HV8,000 ~ 10,000】
【MCD- HV5,000 ~ 10,000】
Work Material：Ceramic, Gold / Silver / Aluminum / Copper / Zinc / Magnesium Alloy, Titanium Alloy, Graphite, Carbon Fiber / Glass Fiber, Wood, Bakelite, Acrylic, Stone, Electroless Nickel, Carbide.
★ Polycrystalline Compound Diamond【HV6,500 ~ 8,000】：
Work Material：Ceramic, Aluminum / Copper, Titanium Alloy, Graphite, Carbon Fiber / Glass Fiber, Wood, Bakelite, Acrylic, Stone, Carbide.
★ Polycrystalline Cubic Boron Nitride【HV3,000 ~ 5,000】：
Work Material：Hardened Steel(HRC45~65°), Powder Metallurgy.
