Theme
Digital Transformation
Green Transformation
TAIHO TOOL MFG. CO., LTD.
Product Description :
The AERO series is very suitable for high-power equipment above 80KW.
It has a sharp cutting edges and grooves for great efficiency of discharging the chips. The coating is OSG's diamond coating with glossy surface. This bright and smooth surface optimizes the performance of the end mill, especially in aluminum alloy that weldability and lubricity are required.
The 3-short-blade type and center jet type (AERO-ETS, AERO-O-ETS) are corner radius end mills applied to roughing and finishing.
The 3-long-blade type and extra long blade type (AERO-ETL, AERO-EXTL) are corner radius end mills applied to roughing and finishing.
The 2-short-blade type (DLC-AIR-EDS) is corner radius end mills applied to roughing and finishing.
NINE-9 CUTTING TOOLS CO., LTD.
Product Description :
The “ i-Center ” is a trademark of Nine9,
the developer of the first indexable center drill in the world.(Patented)
Offering an indexable insert system for the 1st time, Nine9’s “i-Center ” design improves your process performance. Shortens set up and center drilling time.Increases tool life and reduces tooling costs.
● High Speed, High Feed Rate
• The special ground insert and rigid holder design facilitate high performance speed and feed rates. For example, drilling alloy steel
at 6000 rpm and feed rate of 600 mm/min. (0.1 mm/rev.).
● Excellent Repeatability
• The positioning repeatability of the insert is within 0.02 mm
(.0008”) in radial direction, thus ensuring conformity to any national
standards.
● Easy Tool Length Setting
• The axial position accuracy of the insert is 0.05 mm (.002”). It is
not necessary to reset the tool length when changing or cutting edge.
● Extended Tool Life
• Coolant can be supplied through the center of the holder to increase performance and extend tool life.
• Insert geometry, grades and coating process are specifically engineered for centering applications.
7-LEADERS CORP.
Product Description :
End Mills for Aluminium- 3 Flutes
Design with sharp cutting edge, high removal cutting geometry, and fine grinding smooth surface to prevent sticking problem.
Higher finishing of cutting edge to have better surface roughness after processing.
Application for roughing and finishing in various Aluminium.
CHIN MING PRECISION TOOLS CO., LTD.
Product Description :
★ For titanium alloy, stainless steel and alloy steel(≦45°HRC) machining.
★ Chattering is decreased dramatically with unequal flute spacing ＆ nonequivalent helix angle, increase processing speed and stability.
★ Circular flute design for better chip disposal, reduces chip packing, release stress and improving rigidity of the tool.
★ Use for roughing cutting, semi finishing, finishing.
BEST DIAMOND INDUSTRIAL CO., LTD.
Product Description :
Compared to resin bond and metal bond wheels, Electroplated Grinding Tools are noted for relatively large grit protrusion and higher abrasive concentration. This results in very free cutting properties and in high stock removal capacity. Besides, these tools are noted for:
1. Allow special shapes and profile tools to be made at short notice.
2. Cause very little change on wheel shape after used, suitable for precision grinding.
Application and Processing Material for Electroplated Grinding Tools :
1. Internal grinding: Suitable for the internal grinding of carbide and High Speed Steel. The smallest diameter of our electroplating area is 0.3mm so it could be used in drilling for fined ceramics.
2. Jig grinding: Mostly used in fined ceramics processing and precision grinding for quartz. Customized items are also provided to cater your needs. Common grit size is #80~#325, good for rough and fine processing.
3. Touchscreen Processing: Drilling and chamfering for the glass panel of the smart phone and tablet computer. In order to improve work efficiency, we could also combine different grit sizes in the same diamond mounted point.
4. Grinding for Cutting tools: Normal end-mill grinder and drill grinder go with electroplated wheel. Carbide can be ground by diamond wheel and High Speed Steel could be ground by CBN wheel. Bowl-shape wheel with standard specification is also provided, suitable for the grinding of turning tools.
5. Precision grinding: Electroplating can produce wheel of different shapes without deforming it. Therefore, it is suitable for precision grinding or trimming aluminum oxide wheel.
6. Gem grinding: shape grinding for gem, semi-precious stones, shell and jade.
CHIN MING PRECISION TOOLS CO., LTD.
Product Description :
★ Single Crystal Diamond(Ultra Precision Cutting)：
【CVD- HV8,000 ~ 10,000】
【MCD- HV5,000 ~ 10,000】
Work Material：Ceramic, Gold / Silver / Aluminum / Copper / Zinc / Magnesium Alloy, Titanium Alloy, Graphite, Carbon Fiber / Glass Fiber, Wood, Bakelite, Acrylic, Stone, Electroless Nickel, Carbide.
★ Polycrystalline Compound Diamond【HV6,500 ~ 8,000】：
Work Material：Ceramic, Aluminum / Copper, Titanium Alloy, Graphite, Carbon Fiber / Glass Fiber, Wood, Bakelite, Acrylic, Stone, Carbide.
★ Polycrystalline Cubic Boron Nitride【HV3,000 ~ 5,000】：
Work Material：Hardened Steel(HRC45~65°), Powder Metallurgy.
TAIHO TOOL MFG. CO., LTD.
Product Description :
AE-VM features good stiffness, unequal lead and helix angle to enhance anti-vibration.
New flute design fulfills better chip removing.
New Coating “DUARISE” provides advantage on lubricity, wearability, high temperature oxidation resistance, and muti-layer structure can prevent it from thermal cracking.
Standard Type and Short Blade Type(AE-VMS、AE-VMSS):Square, Radius, and 90°(-RA) end mill.
3D, 4D Long Blade Type(AE-VML):Square, Radius, and Chip-breaking flute(AE-VML-N) end mill.
Side Milling Type(AE-VMFE): Square, and Radius end mill.
