Theme
Digital Transformation
Green Transformation
NINE-9 CUTTING TOOLS CO., LTD.
Product Description :
NC Helix Drill cuts material by helical interpolation; serrated cutting edge minimizes chip length.
Low spindle power is not a problem, good for drilling material that generates long, soft chips.
● Reduce Your Tool Inventory
Each holder can machine di erent diameters and hole depths, saving your tool inventory and cost!
No need to peck drill or dwell in operation even machine without internal coolant.
● Lower spindle power consumption Easy to cut!
• Thanks to the small cutting load of the serrated cutting edge and helical interpolation lower power consumption. Work quicker, smarter and achieve better results.
• Circular ramping milling, maximum ramping angle is 20°. For example: tool HD27 machining Ø50 mm hole, 9 mm pitch for aluminum, 6 mm pitch for carbon steel.
● Special insert geometry - exceptional swarfs control.
• Serrated cutting edge makes the chips short and small, and easier to evacuate.
• Eliminate swarf and vibration problems while drilling di cult material or deeper holes.
● “One tool” performs multiple applications
• Not only a drill, but an end mill too.
• Small radius path to cut a hole or step hole, various curved cavity shapes on di erent materials.
MONGTEC PRECISION INC.
Product Description :
◎ The general spindle speed is only 6000-15000rpm, and the tool can be pushed up to 55000rpm through 15-70bar coolant pressure, saving 70% of cycle time
◎ Various interfaces can choose BT/HSK/ER/PCS/straight
◎ Tool can be changed by ATC
◎ Display processing tool speed with chip transmission
◎ Excellent run out within 0.003mm
VISION WIDE TECH CO., LTD.
Product Description :
GSF Series 5-axis Gantry Type Machining Center, provided excellent 5-axis simultaneous accuracy performance for 5-axis machining in mold cutting, highly precise contour finishing, milling, drilling, and tapping. Vision Wide manufactured the 5-axis machining center to shorten tool displacement travel and cutting process effectively, and to extend tool lifetime and offer the best choice for composite angle machining. GSF Series had excellent dynamic performance on one-piece structural and equipped high accuracy 2-axis head to achieve 5-axis simultaneous accuracy performance.
•Continuous 2-axis head
•5 axis dynamic rotation synchronization accuracy (TCPM) 0.04mm.
•Built-in Spindle Direct-Driven on B&C axis, 12,000~24,000rpm spindle speed.
•Backlashless driving on B/C axis，Rotation Positioning accuracy ±5”.
•Low table height, closer operating zone, wider door width are convenient design for user.
•Chain type chip conveyor (standard) is able to remove iron chips efficiently.
NINE-9 CUTTING TOOLS CO., LTD.
Product Description :
The “ i-Center ” is a trademark of Nine9,
the developer of the first indexable center drill in the world.(Patented)
Offering an indexable insert system for the 1st time, Nine9’s “i-Center ” design improves your process performance. Shortens set up and center drilling time.Increases tool life and reduces tooling costs.
● High Speed, High Feed Rate
• The special ground insert and rigid holder design facilitate high performance speed and feed rates. For example, drilling alloy steel
at 6000 rpm and feed rate of 600 mm/min. (0.1 mm/rev.).
● Excellent Repeatability
• The positioning repeatability of the insert is within 0.02 mm
(.0008”) in radial direction, thus ensuring conformity to any national
standards.
● Easy Tool Length Setting
• The axial position accuracy of the insert is 0.05 mm (.002”). It is
not necessary to reset the tool length when changing or cutting edge.
● Extended Tool Life
• Coolant can be supplied through the center of the holder to increase performance and extend tool life.
• Insert geometry, grades and coating process are specifically engineered for centering applications.
SHARPMAX TOOL INC.
Product Description :
● Designed for high performance rough machining of
Titanium and other exotic materials.
● Optimum performance with maximum chip load per
tooth and efficient chip formation with higher
volume of metal removal.
● Exclusive PVD coating for long life.
● Vibration Free.
JIN LI CHENG CUTTING TOOL CO., LTD.
Product Description :
睽違2年，深受全球客戶喜愛的金利成SUPER系列，再加入新的主力軍!!!
從大家熟知的JAVN/SUS/ALUS/JIB等四大革命性航太與難切削材刀具，JLC團隊再以最新刀款設計與鍍層來支援航太，複合材，高效抗震與擺線加工等客戶多種加工系統的應用，以滿足日趨多元的加工需求。
這次的SUPER系列新增JMD碳纖複合材專用銑刀，NEO高效抗震銑刀以及 HP5擺線加工專用的銑刀，融合了先前對歐系棒材的堅持與刀款鍍膜的創新，不但在加工上解決客戶最難處理的材料問題，更在穩定度及與效率上考慮到客戶的需求。因此，除了獲得國家專利的認可，相信更能為客戶提供最優質的加工選擇。
SUPER系列新品已開始量產，竭誠歡迎全球客戶諮詢與測試。
JLC研發團隊的用心，絕對讓您在加工上安心。
