Theme
Digital Transformation
Green Transformation
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
The Thread-body single acting hydraulic cylinder use imported oil seal and accessories to guarantee the quality. No oil leakage while clamping in high pressure for a long time. The volume of the thread-body single acting hydraulic cylinder is small. It can be utilized in a small space in the fixture.
This hydraulic cylinder is used to extend out, and when spring returns, but it can't be used for pulling back.
The angle degree between the cylinder and workpiece could not be larger than 10° while installing.
The bottom of the cylinder barrel needs a leakage-proof gasket.
Max. operating pressure: 250 kgf/cm²
Min. operating pressure: 20 kgf/cm²
Single acting
Usable fluid:
MAHO ENTERPRISE CO., LTD.
Product Description :
Pneumatic tapping machine is suitable for different size taps (from M2 to M27). The arm is equipped with lubricated for life bearings at all swivel points, provides weightless operation through the use of gas counter balance springs and permits the operator to bring the tap to the hole with ease.
EANG LIAN CORPORATION
Product Description :
Professional Abrasive Brushes-Specifically designed for mechanical finishing tasks .
Specifically designed for mechanical finishing tasks .
That can be used in both conditions: dry grinding or wet grinding;
ideal for deburring parts in which the burred edges are in the same plane. Such as: deburring, sharp edge removal, radiusing,
edge contouring, de-fuzzing .
STAND TOOLS ENTERPRISE CO., LTD.
Product Description :
◎ Quickly and safely to clean up sharp cuts like iron & steel
chips and waste.
◎ Release iron filings by pulling the bar.
◎ Easy to pick and release scrap and ferrous debris.
◎ Light, non-rusting stainless steel shaft.
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
Clamptek’s CLF5H series designed with connecting rod structure which can operate conveniently. CLF5H series can also reduce the interference with loading and unloading operation, because when CLF5H series is in the unclamping state, it’s clamping arm can be put lower than holding position.
Clamptek’s CLF5H series’ clamping arm is very flexible. By reducing the interference of the surrounding equipment, CLF5H series can save lots of working space.
Clamptek’s CLF5H series equipped with special dust proof design and high sealing, which can prevent the cutting chips and coolant to infiltration. Therefore, CLF5H series can be used in more severe conditions.
Please kindly check the suggested operating pressure as below,
Max. operating pressure: 70 kgf/cm2
Min. operating pressure: 10 kgf/cm2
Taiwan TeamA Tech. Co., Ltd.
Product Description :
建立於 Fuse 1 成功的基礎下，formlabs 推出進階款選擇性雷射燒結（Selective Laser Sintering, SLS）3D列印機 Fuse 1+30W 及粉末回收系統 Fuse Sift。提升2倍的列印速度，在3倍的雷射功率下，實現真正快速的企業內部生產！使用尼龍粉末燒結技術，搭載高轉換效率的「掺鐿光纖雷射」與專利研發技術「表面盔甲技術」（Surface Armor），讓用戶獲得更穩定的列印品質與更堅固的物件表面。
Formlabs一直以來對於人體健康與環境保護都十分重視，Fuse 1在運轉時，通過國家室內空氣品質標準，其中包含甲醛、TVOC、PM2.5、及PM10…等揮發性有機物測試，列印中不會產生有害氣體，另外也配有完善的粉末回收系統Fuse Sift。除了能將舊粉末過濾後重複使用，還可自動化混合新舊粉、自行選擇刷新比例，減去繁雜的手動混合程序，不僅環保不浪費，更能以最低耗損帶來最高產值。
【Fuse 1+30W 六大特色】
1. 16.5*16.5*30cm 超大列印空間
2. 掺鐿光纖雷射穩定的光束品質
3. 專利Surface Armor技術物件更堅固
4. 粉末回收率高、擁有自動粉末混合系統
5. 兼具高韌性、耐高溫、耐衝擊的多元性能列印材料
6. 繁體中文切片軟體PreForm超好用
SHARPMAX TOOL INC.
Product Description :
● Engineered with eccentric relief for maximum edge strength in both roughing and finishing applications.
● Variable pitch geometry results in higher quality parts by decreasing chatter and harmonics.
● ZrN coating offers high hardness for estended tool life in high temp alloys and ferrous metals including stainless stee.
STAND TOOLS ENTERPRISE CO., LTD.
Product Description :
◎ Two tones of a loud buzzer are easily recognized when closing the target torque
◎ A large LCD and a stable torque increment avoid misreading, which is often occurred
with mechanical torque wrench. LED lights are flashing when closing the target torque.
◎ The square or round handle is vibrating when reaching the target torque.
◎ Unit conversions are automatically made among Nm, Ibf-ft, Ibf-in, and kgf-m.
◎ The DG-ll@ digital torque wrench has the capacity to store up to 32 torque values in
memory, and can be reviewed easily after working.
Optional
BEST DIAMOND INDUSTRIAL CO., LTD.
Product Description :
Compared to resin bond and metal bond wheels, Electroplated Grinding Tools are noted for relatively large grit protrusion and higher abrasive concentration. This results in very free cutting properties and in high stock removal capacity. Besides, these tools are noted for:
1. Allow special shapes and profile tools to be made at short notice.
2. Cause very little change on wheel shape after used, suitable for precision grinding.
Application and Processing Material for Electroplated Grinding Tools :
1. Internal grinding: Suitable for the internal grinding of carbide and High Speed Steel. The smallest diameter of our electroplating area is 0.3mm so it could be used in drilling for fined ceramics.
2. Jig grinding: Mostly used in fined ceramics processing and precision grinding for quartz. Customized items are also provided to cater your needs. Common grit size is #80~#325, good for rough and fine processing.
3. Touchscreen Processing: Drilling and chamfering for the glass panel of the smart phone and tablet computer. In order to improve work efficiency, we could also combine different grit sizes in the same diamond mounted point.
4. Grinding for Cutting tools: Normal end-mill grinder and drill grinder go with electroplated wheel. Carbide can be ground by diamond wheel and High Speed Steel could be ground by CBN wheel. Bowl-shape wheel with standard specification is also provided, suitable for the grinding of turning tools.
5. Precision grinding: Electroplating can produce wheel of different shapes without deforming it. Therefore, it is suitable for precision grinding or trimming aluminum oxide wheel.
6. Gem grinding: shape grinding for gem, semi-precious stones, shell and jade.
JIN YEAR PRECISION CO., LTD.
Product Description :
Features:
1. This machine has the "CE safety authentication".
2. Operates is fast and simple.The quality is stable.
3. Point Angle 90°~135°.(Generally is suitable 118°)
4. Chisel edge grinding. Can adjusting by your demand.(Generally is suitable 0.7mm)
5. It's the first to research and development "up to down" swinging grinding way.The finished drill is sharpest, and the most durable.
Our company new researches and develops, swing the drill grinding from up to down, very sharp.
Generally rotate the drill grind left to right, it's blunt.
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
＊High supporting force
CSP-P/ CSP-K increases the holding force between the piston rod and the inner jacket to arise the higher supporting force.
＊Coolant cleaning measures
In order to prevent the malfunction from the intrusion of high-pressure coolant and the cutting dust entering the internal structure, air can be cleaned at the breathing port when replacing the workpiece. Air cleaning requires a dedicated air circuit. (recommended cleaning pressure is 0.3 - 0.5MPa).
＊Universal piping base
CSP-P/ CSP-K piping base is interchangeable, which can be installed with other low-pressure cylinders in the same specifications.
YATAGHAN ENTERPRISE CO., LTD.
Product Description :
Miracle Air Grinders and Profiler-Linears have different types with high torque and excellent concentricity.
The variety of our tools can help you handle all processing conditions.
We provide all kinds of high quality Air Grinders and Profiler-Linears available on the market at competitive prices.
We provide all kinds of high quality Air Grinders and Profiler-Linears available on the market at competitive prices.
