Theme
Digital Transformation
Green Transformation
YOKE INDUSTRIAL CORP
Product Description :
•Rotates through 360° and pivot 180°, and simultaneously allows lifting from any direction.
•Manufactured from forged alloy steel, quenched and tempered.
•Manufactured and tested in accordance with EN1677-1.
•Load rated parts are 100% magnaflux crack detected.
•Individual forged parts and cap screw are traceable to Test Certification.
•Bolt are Metric thread (ASME / ANSI B18.3.1M).
•Proof tested to 2.5 times the WLL.
•Fatigue rated to 1.5 times the WLL.
•All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.
•Quick and simple assembly, just a tapped hole is required.
SPINTECH PRECISION MACHINERY CO., LTD.
Product Description :
●To meet the demand of processing hard and brittle material, toughness material, and dead soft material.
●To provide the cutting line speed for the tool of micro machining to increase high yield rate of processing.
●Can be used on the existing machine equipment for current machine tool equipment manufacturers.
●To conform the processing needs between traditional milling and ultrasonic.
SING CHIUN ENTERPRISE CO.,LTD.
Product Description :
Connector products include:
(1) LIQUID-TIGHT CONNECTORS
(2) COMBINATION CONNECTORS
(3) POLYESTER LIQUID-TIGHT CONNECTORS
(4) THREAD PG & M CONNECTORS ADAPTER (Metal)
(5) MS-PLUG/CONNECTORS ADAPTER (Metal)
(6) SQUEEZE LIQUID-TIGHT CONNECTORS(Hydraulic
clamp is not loose)
(7) METAL CABLE GLAND
(8) POLYESTER CABLE GLAND
(9) MS-PLUG/CONNECTORS ADAPTER (Polyester)
(10) METAL 90° ANGLE-SHAPED WALL-MOUNTED
OUTLET SOCKET
(11) MTR METAL ADAPTER
ASMITH MANUFACTURING COMPANY
Product Description :
Dust-resistant, waterproof (IP66), resistance to heat and corrosion.
Patent: Pawl is fixed by 4 positioning points and the grooved shaft-bolt, easy for assembly and adjustment. Need only to slide the pawl through the shaft-groove to the correct position, more stable and accurate.
Left, right and top opening. The pawl moved forward and reversed vertically 3mm while the compression latch is opened and closed.
Used widely for door panel of general cabinet boxes.
Pawl can be easily positioned to accommodate the suitable compression.
In accordance with RoHS.
➤Material-body and lever: SUS304(stainless steel)-vibration ground and brushed finish in front.
➤Material-shaft, pawl and mounting bracket: SUS304(stainless steel).
MONGTEC PRECISION INC.
Product Description :
◎ The general spindle speed is only 6000-15000rpm, and the tool can be pushed up to 55000rpm through 15-70bar coolant pressure, saving 70% of cycle time
◎ Various interfaces can choose BT/HSK/ER/PCS/straight
◎ Tool can be changed by ATC
◎ Display processing tool speed with chip transmission
◎ Excellent run out within 0.003mm
Skeye Machinery co.,LTD
Product Description :
The appearance and structural dimensions of the YRTS high-speed turntable bearing (referred to as YRTS turntable bearing) series are the same as the YRT series, but the internal structure is different from the YRT series. This determines that the YRTS turntable bearing series has a higher limit speed than the YRT turntable bearing series. The friction torque is lower and more uniform than that of the YRT turntable bearing series. Therefore, this series can be selected for applications that require relatively low friction but relatively high speed, such as bearings used for shafts driven by direct drive motors.
The radial rollers use nylon retainers, so that the YRTS bearing has the characteristics of high limit speed and low and stable friction torque, so this kind of bearing is suitable for engines with torque.
Cartell Chemical Co., Ltd.
Product Description :
我們的厭氧膠分為四大類：
◆螺絲固定劑：能完全填充螺紋之間的空隙，可以取代彈簧墊圈、雙螺母，及其他機械固定裝置，簡化產品的設計，並可防止螺絲扣件腐蝕、卡死、鬆動、滲漏、減少維修時間，永久確保螺絲裝配的安全，提高機械的穩固性。
◆圓形配件固定劑：主要應用於各種金屬圓柱型零組件的組裝。如：軸承、軸套、插銷、鍵槽、齒條、輪轂及滑輪等圓形配件的組裝固定，取代傳統的壓配、插銷、鍵槽等費時費力高成本的工作方式，改為簡易的輕壓配或滑配的方式。
◆管路密封劑：適用於金屬螺紋配管。它可以固定、密封金屬管路系統，填充金屬零件與螺紋之間的空隙，並防止洩漏、承受管路壓力、防止熱脹冷縮或震動引起的鬆脫和洩漏。
◆法蘭墊片密封劑：適用於各種尺寸的平面表面。它取代了傳統墊片，從而降低庫存成本。其特點包括無溶劑成分、高黏度、耐壓性和使用便捷性。相較於預先切割的墊片，其優勢在於簡化工藝、降低缺陷率、減少生產混亂，以及與多種黏著方法相容。
HOLD WELL INDUSTRIAL CO., LTD.
Product Description :
● With a U-Drive unit commanding the feed control of the tool slide and the tool placement even during rotation, it is made to o er the solution to a series of processes such as threading, conical threading, grooves, slots, curve surface machining and other complex pro les. It makes it possible to
do turning operations on all machining centers.
● It is designed to be used on automatic tool changers to maximize the working e ciency.
● Modular tool-holder slide with interchangeable design permits the various tool applications and machining.
● It is specially designed with two counter-weights for automatic balancing, which move opposite to the slide to e ectively eliminate oscillations.
