Theme
Digital Transformation
Green Transformation
LOTUS INNOVATION TECHNOLOGY CO., LTD.
Product Description :
蓮花創新科技為了讓國內工具機產業有更強的國際競爭力，不惜重資研發綠色科技專利，其成功開發具有五道過濾系統的「油霧回收空氣清淨機」，最新產品「煙塵淨化機:LOMA-AD」則為最新升級機型，最高能達到99.99％的油霧回收率，不僅能讓油霧回收再利用，更能有效過濾0.2μm的懸浮微粒達96.8％以上，為綠色工具機的最佳環保配備。<br />
另有選配產品:濾桶過濾等級為HEPA/H13，能有效過濾細懸浮微粒PM0.2μm達99.95%以上，符合無塵(淨)室的等級要求。
RENISHAW (TAIWAN) INC.
Product Description :
FORTiS 光學尺具備 Renishaw 經過實證的絕對式光學尺技術，並採用卓越的耐用封閉式設計，可在最嚴苛的環境進行高效能量測，比一般系統提供更大的優勢。
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
Product Description :
1. KGC and KGCP types are suitable for grease NLGI grades 000, 00 and 0.
2. Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir.
3. KGC and KGCP types are controlled by PLC (Programmable Logic Controller). It can work with CV type Progressive Feeders which can supply fixed volume of grease. CV type Progressive Feeders can assure each of lubrication point has equal amount of grease.
4. Pressure switch can be added on request for checking if the piping works normally. The standard setting is at 60 bars and the standard specification is NC (Normally Closed) contact, which means if the pressure doesn't reach the default setting, it sends continuous signals. NO (Normally Open) contact is available on request.
5. Magnet Level Switch is also an optional accessory that can be added upon request. It sends continuous signal automatically when the grease level is lower than the minimum level.
6. For the first time use, slightly press the Feed button (F button) to feed grease immediately. F button can be used as manually grease feeding for no more than 3 minutes.
7. AC110V and AC220V motors have thermal controls. When the motor temperature reaches 100℃, the sensor will be on to stop the motor continue running about 5 minutes.
8. It has a pressure gauge that the operator can check the pressure easily.
9. It can be used for the machines requiring strictly rationing grease flow. It usually works with rubber or plastic machines, press machines, machine centers, woodworking machines, etc.
HAI JU TRADING CO., LTD.
Product Description :
Acme Keylocking插銷式螺紋襯套應用於<br />
快速修復損壞線圈，產生全新的堅固螺紋；<br />
或用於未加工的母材上。<br />
使用Acme螺襯不需特殊的鑽頭, 絲攻或預置式裝入工具。
Sterling TSI Co., Ltd.
Product Description :
FAR品牌為印度製油壓中心支架！已在台耕耘多年並受到台灣當地客戶的青睞，有效地幫助客人在加工物件的精度上不至於花費高額的成本達到所需的精度～適用於細長比大的車床加工物件上，幫助物件在高速旋轉時保持在應有的中心度上！
HERZOG TAIWAN
Product Description :
Precision-engineered solid carbide micro drills from German STOCK, ideal for applications in electronics, medical devices, semiconductors, and micro molds. Offers exceptional wear resistance, tool life, and dimensional accuracy, especially in ultra-small diameter drilling tasks.
PARFAITE TOOL CO., LTD.
Product Description :
柄部型式:BT40 / BT50
轉速:12,000rpm~30,000rpm
柄部型式:直柄式
轉速:1,000rpm~60,000rpm
SING LUNG TRADING CO., LTD.
Product Description :
德國EMUGE-FRANKEN 在螺紋加工技術和銑削領域享有盛名，同屬於EMUGE集團公司的高精度夾具也是業內的佼佼者，但由於其非標特性而沒有讓大家所熟知，然而實際上，其絲攻和銑刀及夾具在汽車製造業和航太業加工及工具機製造業等諸多領域已有長期和廣泛的應用。
TSYR TZUN INDUSTRIAL CO., LTD.
Product Description :
1.With circuit protection of breaking for motor, once any wire of three phases power source is broken off, this unit could cut off current to motor to prevent motor from being burn out.
2. Drill sleeves、tapping adaptors and borer holder are with rapid adaptors, very convenient for replacement of cutters.
3.Tapping adaptors with torsion control, tap bits are protected from being twisted off.
4.MTM-932ADL comes with drilling force control unit for Auto-feeding:
When drill bit is worn out, this unit will drive feeding intermittently or stop feeding.
Once feeding becomes difficult while making a hole, Please replace a new drill bit or re-sharpen the worn out one in order to protect both drilling tool and machine body from being damaged.
5. MTM-932ADL comes with three intermittent breaking rates for breaking chips :
Choose different feeding rates according to different drill bits and material to perform Auto-feeding operation.
This device can break chips intermittently and discharge them while Auto-feeding is processing, so that chips would not roll on drill bit. Easier to discharge chips.
6. MTM-932ADL comes with three feeding rates for Auto-feeding:
Feeding rates are separately 0, 0.15 and 0.25, please choose suitable rate according to size of drill bit and material of work-piece for drilling.
7. The rotation speed of the MTM-932ADL can be changed quickly during running.
It's very convenient for the operator, and the efficiency is increased accordingly.
