Theme
Digital Transformation
Green Transformation
SCN MACHINERY CO., LTD
Product Description :
180°油壓反轉合模機 - SDP series<br />
<br />
Tonnage: 50 - 600 ton<br />
Bolster Area: 1000 x 800 - 4500 x 3000 mm<br />
<br />
龍門型高強性、高精度機身設計，操作簡單的控制系統。<br />
動作精確，機台易操作，可減少勞動者的勞累，提高工作安全。<br />
適用於各類精密成型模具精修。(沖壓模、射出模、鋁壓鑄模)<br />
上模可180°完全翻轉，方便工作人員精修模具。<br />
標準附件：10"LCD觸控螢幕。<br />
符合ISO 9001:2015認證
TOPSDISK CO., LTD.
Product Description :
(1) Backlash approach zero
(2) Better rigidity, compared to traditional rotary table
(3) Apply with powerful brake to ensure position machining stability
(4) Better transmission efficiency due to rolling friction
(5) Min. division degree: 0.001 degree
TAI CHONG CO., LTD.
Product Description :
用途： CNC切削中心機，銑床，龍門銑床，電腦銑床等切削作業。<br />
特性：<br />
本體與面板一體成型加工完成。<br />
以電控操作，快速充脫磁場變換。<br />
以永久磁鐵吸著工件，沒有停電的危險性。<br />
吸磁作業面，螺栓孔可應用於模具及固定方式的變化。<br />
可配合彈性導磁塊，針對變形平面，作平面加工，大量節省調整時間，提高工作效率。<br />
結構剛性佳，配合精度穩定，適合高精度加工作業。<br />
與強力型電磁鐵比較，大幅度節省電力消耗。<br />
防水效果最確實，保證不漏水，不漏電。<br />
平均吸磁力18kgf/cm2以上。
PHASIC CORPORATION
Product Description :
磁力研磨機<br />
1.磁針藉由機身的磁場進行離心式的研磨拋光作業，能深入內孔、夾縫中進行研磨拋光．<br />
2.清洗後工件的篩選，藉由濾網及磁場將磁針吸附走，能迅速的分離磁針及工件．<br />
3.數控式操作介面，程式控制可以精準設定運轉時間、正反轉時間及結束提示鈴等參數值．
7-LEADERS CORP.
Product Description :
JIS 3XD Drills with Oil-Feed
140° S-shape drill tip design to reduce axial force.
Design with groove shape to provide higher chip removal rates.
Good wear resistance and lubrication with Nano multilayer coating.
Oil-feed design could reduce temperature effectively and increase chip removal rates during cutting process.
Application for drilling with Steels which under HRC48, Cast Iron…etc.
Suitable for drilling with 3XD depth.
GSA TECHNOLOGY CO., LTD.
Product Description :
Dual lead worm wheel / worm shaft which allowable easy backlash adjustment。
Double bearing design suitable for heavy cutting。
One piece of faceplate and spindle design which offer rigid construction。
Large thru hole design which allowable large work piece going thru spindle。
VICTOR TAICHUNG MACHINERY WORKS CO., LTD.
Product Description :
．Turning & Milling in one set-up
．Y-axis travel 260 mm (10.2")
．Max. turning dimension Ø500 x 1075 mm
．Turning spindle 4200 rpm / 15 KW with 8” chuck for Vmt-X200, or 3500 rpm / 22 kW with 10” chuck for Vmt-X260
．Milling spindle 12000 rpm / 22 kW
．with HSK-T63 / A63 tooling
．ATC-40 tools
ANNN YANG MACHINERY CO., LTD.
Product Description :
CNC Lathe with big spindle bore 255mm, double chucks, for oil pipe
YANMECH Industrial Co., Ltd.
Product Description :
【A Series：】
1. The jaw can be individually operated, and irregularly shaped workpieces can be clamped.
2. Install side strips and chips cover sealed base jaw to prevent chips and coolant ingress.
【D Series：】
1. Install side strips and chips cover sealed base jaw to prevent chips and coolant ingress.
2. Adapter Plates can be selected.
3. The base jaw is lower than the body surface and can be used for multipurpose.
4. Alternative spindle adaptors:
ASA or DIN adaptors can be supplied as requested.
VICTOR TAICHUNG MACHINERY WORKS CO., LTD.
Product Description :
．One piece 30˚ slant bed with large swing diameter
．10" Power chuck / 3500 rpm (A260)
． Z-axis travel 750 mm
．High thrust force by small pitch ballscrew
．High rapid feed 24 m/min (Z-axis)
．Shortened belt driven spindle
．Digital tailstock
．8” chuck for subspindle (opt.)
