Theme
Digital Transformation
Green Transformation
ASIA PACIFIC ELITE CORP.
Product Description :
G800T,a single machine completes all cutting processing.
The APEC 5-axis mill-turn machining center G800T is built with a vertical structure to tackle the limitations faced by traditional lathe machining. After turning, it seamlessly transitions into milling without having to move the workpiece, cutting down on time and human errors. This means you can complete the job in one go without switching processes, leading to a more efficient and modern machining experience.
Taiwan TeamA Tech. Co., Ltd.
Product Description :
Form 3L為 Formlabs 推出的大型光固化3D列印機，是一款成型空間達擁有達33.5*20*30cm的桌面級3D列印機，讓您的想像力不受限！採用最新專利研發的低應力光固化成型技術（LFS），擁有彈性樹脂槽與封閉式光學模組（LPU）等，大幅增加了機器的可靠與穩定性，精確度、平滑度及透度都大大增加，讓您的大物件也擁有精緻細節！搭配Form Wash L自動清洗機與Form Cure L溫控光固機，以磁力迴旋可一次清洗一個Form 3L平台或是兩個Form 3平台，並使用兩個500W加熱器與大功率紫外線燈全方位高度強化，發揮材料最佳性能！
Form 3L特色包含
1. 33.5*20*30cm 超大列印空間
2. 大型物件也有大大的細緻度
3. 彈性成型槽印大型實心物件也不怕
4. 專利LFS技術配合光學模組使透度平滑度大幅提升
5. 雙卡匣智能給料，安心列印不中斷
6. 高達20多種樹脂滿足外觀、功能驗證需求
7. 輕觸支撐材，好拆不麻煩
8. 繁體中文切片軟體PreForm超好用
E-TECH MACHINERY INC.
Product Description :
EGP-2520CNC is a high-efficiency cylindrical grinding machine with ultimate reduction in footprint. With a floor space requirement of less than 1.8m2 and 500mm diameter grinding wheel, it is suitable for small workpieces machining. Distance between center is designed to be 200mm, the center height is 125mm, and the maximum weight of workpiece can be processed is 5 kilogram.
HYDROKOMP GmbH
Product Description :
Coupling elements of HYDROKOMP are made of stainless materials. This enables the elements to be used for all fluids and gases that are not aggressive. Special designs eg. for water steam or other media are available on request. HYDROKOMP offers coupling elements for two different operating modes depressurized coupling or pressurized coupling. The elements for depressurized coupling can be coupled pressurized up to 25 bar, if the specified volume flow is not be exceeded. When using higher operating pressure there ockures a risk of demaging the soft seal in the check valve as the result of high flow velocities of the fluid. This means for coupling of air up to 10 bar there should be always used the coupling elements for depressurized coupling. This also applies when the coupling process is initiated pressurized. The elements which can be coupled pressurized may be coupled up to the maximum specified operating pressure on one side and / or on both sides.
VAST MILLTURN TECHNOLOGIES CO., LTD.
Product Description :
T series turning centers are designed from structure to entire operation flexibility; extreme rigidity provides the best stability for long and large diameter work-pieces. With the various spindle choices, make it possible for the best powerful performance for many types of job.
JAR HON MACHINERY CO., LTD.
Product Description :
1.Both cutting TAP and forming TAP are suitable.
2.Fully automatic machine so a person can operate many machines.
3.Gear-pitch type auto. tapping will get a precise & accurate thread for finished workpiece.
4.It can option to add inverter or use servo motor to control the spindle speed.
4. Especially suitable for light workpiece.
NINE-9 CUTTING TOOLS CO., LTD.
Product Description :
NC Helix Drill cuts material by helical interpolation; serrated cutting edge minimizes chip length.
Low spindle power is not a problem, good for drilling material that generates long, soft chips.
● Reduce Your Tool Inventory
Each holder can machine di erent diameters and hole depths, saving your tool inventory and cost!
No need to peck drill or dwell in operation even machine without internal coolant.
● Lower spindle power consumption Easy to cut!
• Thanks to the small cutting load of the serrated cutting edge and helical interpolation lower power consumption. Work quicker, smarter and achieve better results.
• Circular ramping milling, maximum ramping angle is 20°. For example: tool HD27 machining Ø50 mm hole, 9 mm pitch for aluminum, 6 mm pitch for carbon steel.
● Special insert geometry - exceptional swarfs control.
• Serrated cutting edge makes the chips short and small, and easier to evacuate.
• Eliminate swarf and vibration problems while drilling di cult material or deeper holes.
● “One tool” performs multiple applications
• Not only a drill, but an end mill too.
• Small radius path to cut a hole or step hole, various curved cavity shapes on di erent materials.
TOP POWER MACHINERY ENTERPRISE CO.
Product Description :
The oil-water separator can separate the slide oil and cutting oil from the water in the water tank of the machine tool, thereby realizing the centralized discharge of waste oil while maintaining clean oil and water for circulating filtration. Features: It can be used without horizontal calibration and has a built-in double-layer impurity interception device to ensure efficiency and safety during operation. It is easy to install and use, and can easily extend the service life of the cutting fluid. It adopts pneumatic drive, which is safer and more reliable. The product has zero consumables and no additional burden.
HONG JI PRECISION MACHINERY LTD.
Product Description :
Drilling capacity is from Ø5mm to Ø40mm and the max. drilling length is 3000mm
The machine is suitable for drilling accessories of petroleum system, tube holes of heat-exchangers, long mechanical sleeves and long aerospace parts.
Slideways of all axis are harden box ways with heat-treatment to HRC52, this design has good damping to absorb vibration as drilling big and long holes.
The worktable is loaded on the harden box slideways with width 200mm. The max. loading weight on the worktable is 20tons.
The width of column is 2 meters with two sub-columns to provide the excellent support to Y-axis as moving up and down. Total weight of the machine is about 38tons.
