Theme
Digital Transformation
Green Transformation
TAIWAN 3AXLE TECHNOLOGY CO., LTD
Product Description :
Feature of product :
The light spot can be adjusted from 0 to 300mm;
Rust removal gun weight 0.7KG
The system monitors the running status from time to time, monitors and collects the running status of lasers, chillers, and control panels;
Light weight, small size, ergonomic design, comfortable grip;
The safety lock touches the light;
The operation is simple and easy to use, and the requirements for operators are extremely low;
Strong anti-interference;
The fully sealed structure has built-in water and air channels;
Safe and pollution-free, low maintenance cost;
The hand-held laser rust removal and cleaning machine adopts the latest generation of optical fiber laser, which has the advantages of simple operation, small appearance and fast cleaning speed. It has an irreplaceable cleaning process in hardware material rust removal and oil removal. Easy to install, control and automate. Simple to operate, turn on the power and turn on the equipment, you can clean without chemical reagents, media, dust and water, you can manually adjust the focus, clean with curved surfaces, and clean the surface with high cleanliness Advantages, can remove resin, oil, stain, dirt, rust, coating, plating, paint on the surface of the object.
TSYR TZUN INDUSTRIAL CO., LTD.
Product Description :
PRODUCT FEATURES
With circuit protection of breaking for motor, once any wire of three phases power source is broken off, this unit could cut off current to motor to prevent motor from being burn out.
Drill sleeves、tapping adaptors and borer holder are with rapid adaptors, very convenient for replacement of cutters.
Tapping adaptors with torsion control, tap bits are protected from being twisted off.
The rotation speed of the MTM-930A can be changed quickly during running.
It's very convenient for the operator, and the efficiency is increased accordingly.
RICH SOU TECHNOLOGY CO., LTD.
Product Description :
This machine is an improved model from the Y Rail model, featuring similar functions.
Designed standard with 4-station hanger with two side doors on blasting chamber. To meet your specific production line requirements, additional hangers are available for the entire working environment. Contact us for further details.
Features:
1.The machine employs a PLC controller for continuous cycles of blasting operation.
2.The cycle motions are: the hanging shaft enters the blasting chamber, and then moves to a fixed position at a lower speed. The door closes automatically.
Once the door is closed, the blade starts running automatically, and the machine performs blasting. Once operation is accomplished, steel balls are supplied and the blade stops automatically.
When the blade comes to a complete stop, the door opens automatically. When the door opens to the fixed position, the chain conveyor quickly delivers the nest hanging rod into the blasting chamber, then moves forward at a lower speed to a fixed position.
The door closes automatically and performs the nest cycle of blasting operation.
HOLDING ELECTRIC CO., LTD.
Product Description :
Holding Magnetic tools honing edge machines can achieve the following effects in a short time.
1. Trim the chipped and sawn edges to remove burrs and burrs.
2. Achieving consistent rounding processing, making the blade smooth, smooth, and sharp, durable.
3. Improve the surface finish and surface roughness of the workpiece.
4. Increase tool life and reduce the probability of chipping. The measured value can increase the tool life by up to 65%.
MAHO ENTERPRISE CO., LTD.
Product Description :
Hydraulic tapping machine is suitable for different size taps (from M4 to M50). The machine is equipped with hydraulic pump system for controlling the spindle to tap. The arm is equipped with lubricated for life bearings at all swivel points, provides weightless operation through the use of gas counter balance springs and permits the operator to bring the tap to the hole with ease.
JAR HON MACHINERY CO., LTD.
Product Description :
1.Both cutting TAP and forming TAP are suitable.
2.Fully automatic tapping process. One operator can easily operate several machines at the same time.
3.By using proper master pitch gears(change gears A and B pair), highly accurate thread can be tapped. It is easy and quick to change different size.
4.The length of the tapping stroke can easily be adjusted for high accuracy which is suitable for tapping blind hole parts.
5.It has safe device to monitor the feeding, torque, radial, and clamping to keep TAP's long life and ensure safe working job.
6.It governed by PLC.
7.Long parts or those can't feed in vertical position are suitable.
8.Pre-work parts auto-checking and machine auto-stop if abnormal.
XIN GONG YANG MACHINERY CO., LTD.
Product Description :
◎Spindle Taper：ISO-50
◎Outside Diameter of Flange：Ø250 / Ø300
◎Max. Speed：800RPM / 2000RPM
◎Can be opposite-side milling, no need to correct the accuracy again.
◎Spindle water repellent.
XIN GONG YANG MACHINERY CO., LTD.
Product Description :
◎Spindle Taper：ISO 50
◎Outside Diameter of Flange：Ø250 / Ø300
◎Max. Speed：3000RPM
◎Applicable work:
0~800RPM-light cutting；
800~3000RPM-finish milling
XIN GONG YANG MACHINERY CO., LTD.
Product Description :
◎Types: 12.5HP x 4P ;15HP x 4P
◎Designed for machine tools, including CNC heavy-duty double-column milling machines, dedicated machinery etc.
