Theme
Digital Transformation
Green Transformation
Hantop Intelligence Technology
Product Description :
Tool Holder Spec. provided:
BT30, BT40, HSKA63, HSKE25, HSKE32, HSKE40, CAT40
1. High Speed, high efficiency ultrasonic machining solution for high precision advanced materials machining(can reach 38000 rpm)
2. Plug and Play design for convenient and flexible Installation
3. Effective Intelligent Tracking System for advanced materials machining, finding the suitable resonance between tools and modules
4. Non-Contact transmission Design doesn't limit the high spindle rotation and reduce the impact from cutting heat, enhancing tool life and quality to next level.
TSYR TZUN INDUSTRIAL CO., LTD.
Product Description :
PRODUCT FEATURES
FM-35DL Comes with drilling force control unit for Auto-feeding:
When drill bit is worn out, this unit will drive feeding intermittently or stop feeding. Once feeding becomes difficult while making a hole, please replace a new drill bit or re-sharpen the worn out one in order to protect both drilling tool and machine body from being damaged.
FM-35DL Comes with two intermittent breaking rates for breaking chips:
Choose different feeding rates according to different drill bits and material to perform Auto-feeding operation. This device can break chips intermittently and discharge them while Auto-feeding is processing, so that chips would not roll on drill bit.
Easier to discharge chips.
The machine body is with height adjustment. It’s suitable for both lone and short annular cutters as well as general chuck which is for holding drill with straight handle.
The general chuck is applicable for holding drill which is with straight handle for drilling smaller holes(from 8-13mm).
TSYR TZUN INDUSTRIAL CO., LTD.
Product Description :
1.With circuit protection of breaking for motor, once any wire of three phases power source is broken off, this unit could cut off current to motor to prevent motor from being burn out.
2. Drill sleeves、tapping adaptors and borer holder are with rapid adaptors, very convenient for replacement of cutters.
3.Tapping adaptors with torsion control, tap bits are protected from being twisted off.
4.MTM-932ADL comes with drilling force control unit for Auto-feeding:
When drill bit is worn out, this unit will drive feeding intermittently or stop feeding.
Once feeding becomes difficult while making a hole, Please replace a new drill bit or re-sharpen the worn out one in order to protect both drilling tool and machine body from being damaged.
5. MTM-932ADL comes with three intermittent breaking rates for breaking chips :
Choose different feeding rates according to different drill bits and material to perform Auto-feeding operation.
This device can break chips intermittently and discharge them while Auto-feeding is processing, so that chips would not roll on drill bit. Easier to discharge chips.
6. MTM-932ADL comes with three feeding rates for Auto-feeding:
Feeding rates are separately 0, 0.15 and 0.25, please choose suitable rate according to size of drill bit and material of work-piece for drilling.
7. The rotation speed of the MTM-932ADL can be changed quickly during running.
It's very convenient for the operator, and the efficiency is increased accordingly.
JAR HON MACHINERY CO., LTD.
Product Description :
1.Both cutting TAP and forming TAP are suitable.
2.Fully automatic tapping process. One operator can easily operate several machines at the same time.
3.By using proper master pitch gears(change gears A and B pair), highly accurate thread can be tapped. It is easy and quick to change different size.
4.The length of the tapping stroke can easily be adjusted for high accuracy which is suitable for tapping blind hole parts.
5.It has safe device to monitor the feeding, torque, radial, and clamping to keep TAP's long life and ensure safe working job.
6.It governed by PLC.
7.Long parts or those can't feed in vertical position are suitable.
8.Pre-work parts auto-checking and machine auto-stop if abnormal.
MAHO ENTERPRISE CO., LTD.
Product Description :
Hydraulic tapping machine is suitable for different size taps (from M4 to M50). The machine is equipped with hydraulic pump system for controlling the spindle to tap. The arm is equipped with lubricated for life bearings at all swivel points, provides weightless operation through the use of gas counter balance springs and permits the operator to bring the tap to the hole with ease.
SHARP ONE CO., LTD.
Product Description :
M26AB is of good quality and meets market needs. It solves the
incomplete design of the traditional end mill grinding machine on the
original market. Compared to other brands, M26AB features are as
follows.
Single piece grinding wheel can grind different end gash, first to none.
It can grind variable index and spiral.
Positioning is visible. Grinding intensive and powerful blades is
adjustable.
Grinding carbide flat drill bit.
Grinding chip flutes positive angles.
Standard vacuum can decrease chips spreading, good for health and
machine.
M26AB multi-function machine greatly reduces the cost of end mills
and increases the efficiency. It is the first end mill grinding machine with
standardized positioning, standardized & friendly operation, and multifunction
on the market. These advantages attract users to test our
machines and prove that M-26-AB can help their daily work.
HOLDING ELECTRIC CO., LTD.
Product Description :
Holding Magnetic tools honing edge machines can achieve the following effects in a short time.
1. Trim the chipped and sawn edges to remove burrs and burrs.
2. Achieving consistent rounding processing, making the blade smooth, smooth, and sharp, durable.
3. Improve the surface finish and surface roughness of the workpiece.
4. Increase tool life and reduce the probability of chipping. The measured value can increase the tool life by up to 65%.
TAIWAN 3AXLE TECHNOLOGY CO., LTD
Product Description :
. Processing size: 1300*900mm.
. Metal cutting configuration with Raycus fiber laser, laser wattage 1000W
. Non-metal cutting configuration 320W Co2 laser tube + professional thick plate cutting head
. Professional cutting system, "one-key switch button" on the machine, can easily switch between metal cutting function and non-metal cutting function.
. This equipment is specially designed for cutting a variety of materials, whether metallic or non-metallic.
. We combine the top-standard Co2 non-metal laser cutting machine configuration with the most popular fiber laser cutting configuration currently used in one machine
. Metal cutting head, 10mm focus Z axis direction adjustment, wide cutting range; excellent and stable beam quality, perfect water-cooled structure, advanced dustproof design, effectively avoid dust intrusion.
. Co2 non-metallic laser cutting performance can perform acrylic cutting with a thickness of 30mm. Because the laser head of this model is specially designed, it shows a bright clean surface without ripples after the acrylic cutting of thick plates.
. Optical fiber laser metal cutting performance Stainless steel can be perfectly cut to 3mm without post-processing. For carbon steel, it can also be cut to a degree of 6~8mm. It is the same grade for professional cutting applications.
YAW SHENG MACHINERY CO., LTD.
Product Description :
Yao Sheng Machinery Industrial Co. is committed to developing and manufacturing shot blasting machines. We have accumulated rich experience in the field over the four decades. This blasting machine equipped with rails, hangers and hooks, by special design-ensures an even shot blasting and satisfactory treatment in a shorter time. Widely applied in surface treatment in various industrial sectors includes casting, forging, die-casting parts, automobile parts and paint industry, etc.
We set up a R&D division and provide more varieties and customized machines to various industrial sectors. Manufacturing of all products is conformed to ISO standard, and we hold quite a few patents for the machine. Our product is high-functioning. This machine features the mechanism of rotation and spinning, by the special design can greatly reduces blasting time and cost. For all materials that require surface treatment.
YIH KUAN ENT CO., LTD.
Product Description :
1. IK milling heads can upgrade or replacement your original machine body, milling machine or special machine.
2. Chrome quill with super precision preloaded bearing can bring the high quality cutting benifits for machine and we also offer P4 bearings for your optional.
3. Machining travel can up to 127mm (5").
4. This product offer NT30 or R8 two kind of spindle machine model for you to optional.
5. Offer table 254x1720mm、X.Y.Z travel 851x405x440mm turret milling machine body (whole body) for you to optional.
6. There are 11 models in IK Turret Milling Machine Head Series.
With ultra-precision pre-load bearings, can bring you high-quality cutting benefits, but also provide P4-class bearings for you to choose from
