Theme
Digital Transformation
Green Transformation
Taiwan Auto-Design Co.
Product Description :
// SolidMEN-300的優點
✅ 材料: 不綁材料僅建議合格廠商,未來可自行選用適合材料
✨ 雷射: 德國 500W 水冷式雷射穩定性佳
⚡ 層厚: 層厚可控範圍 10~100μm (最小進給單位 10μm)
🛠️ 成品: 可列印多種金屬材料,強度超過鑄造,可作為表面後處理及拋光使用
🔬 研發: 不綁參數開放製程研究,未來材料無受限可自行開發
⬆️ 尺寸: 300x300x300 可製作大尺寸工件,另有機型可增大或縮小
💎 緻密度>99.5%,品質優於鑄造,近似鍛造
🤖 搭配遠端資訊與智能化視覺模組,方便製程穩定性及智慧化整合。
(即時錄影、列印層數/高度、雷射功率、粉未剩餘量、腔體含氧量、製程時間等)
MING HUNQ MACHINERY CO., LTD.
Product Description :
GD-100 is a device that can serve your need for grinding and chamfering of sheet metal. Such as flame cutting, laser cutting, punching of the residue and bristles after stamping. All of the sharp angle of the edges and inner holes can easily be done on this machine.
RINGTECH INSTRUMENTS CO., LTD.
Product Description :
IFP vacuum cleaning machine can effectively clean any size and structure of complex metal products, great for either large or small amount of cleaning, it is also the best vacuum cleaning machine available for environmental protection and energy-saving! The cleaning cycle is carried out in a complete vacuum environment that the working environment is clean and odourless. During operation, the user can select different options from spray, rotate, ultrasonic, rinse...etc. based on the workpiece. With the cutting edge iFP cleaning technology, overcoming difficult cleaning situations such as cleaning blind holes, slits can be effortless. After cleaning, the chips and residual cutting oil will be separated from the cleaned workpiece, the chips are fully dried and can be collected from the filter; the residual cutting oil will also be separated from water and could be recycled and reused.
Facing the new industry trend and the new future, IFP cleaning machine is your best cleaning choice!
JAR HON MACHINERY CO., LTD.
Product Description :
1.The machine can be attached double spindle head and work efficiency can be more increased.
2.Both cutting TAP and forming TAP are suitable.
3.The length of the tapping stroke can easily be adjusted for high accuracy which is suitable for tapping blind hole parts.
4.It has safe device to monitor the feeding, torque, radial, and clamping to keep TAP's long life and ensure safe working job.
5.It can install additional hopper to increase automatic working.
6.It can install additional sheet metal cover to gain more safety and reduce noise.
7.Pre-work parts auto-checking and machine auto-stop if abnormal.
SHARP ONE CO., LTD.
Product Description :
M26AB is of good quality and meets market needs. It solves the
incomplete design of the traditional end mill grinding machine on the
original market. Compared to other brands, M26AB features are as
follows.
Single piece grinding wheel can grind different end gash, first to none.
It can grind variable index and spiral.
Positioning is visible. Grinding intensive and powerful blades is
adjustable.
Grinding carbide flat drill bit.
Grinding chip flutes positive angles.
Standard vacuum can decrease chips spreading, good for health and
machine.
M26AB multi-function machine greatly reduces the cost of end mills
and increases the efficiency. It is the first end mill grinding machine with
standardized positioning, standardized & friendly operation, and multifunction
on the market. These advantages attract users to test our
machines and prove that M-26-AB can help their daily work.
TAIWAN 3AXLE TECHNOLOGY CO., LTD
Product Description :
Colour Marking Fiber Laser
Marking Machine
Good for metal materials, All polycarbonate material, plastic Stainless steel and other metal materials surface marking.
Laser safty goggles, Simple Fixture, External red light, Foot Switch.
Taiwan laser marking software
Availavle in 9 languages, English, Traditional/Simplified Chinese, German, Japanese, Polish, Portuguese, Turkish, Vietnamese, Portuguese, Turkish, Vietnamese.
Deep engraving, Metal marking, Serial number, QR code, Data matrix all in one machine.
Auto focus up to 4cm.
3D Rotary up 120º degree.
TAIWAN 3AXLE TECHNOLOGY CO., LTD
Product Description :
. Processing size: 1300*900mm.
. Metal cutting configuration with Raycus fiber laser, laser wattage 1000W
. Non-metal cutting configuration 320W Co2 laser tube + professional thick plate cutting head
. Professional cutting system, "one-key switch button" on the machine, can easily switch between metal cutting function and non-metal cutting function.
. This equipment is specially designed for cutting a variety of materials, whether metallic or non-metallic.
. We combine the top-standard Co2 non-metal laser cutting machine configuration with the most popular fiber laser cutting configuration currently used in one machine
. Metal cutting head, 10mm focus Z axis direction adjustment, wide cutting range; excellent and stable beam quality, perfect water-cooled structure, advanced dustproof design, effectively avoid dust intrusion.
. Co2 non-metallic laser cutting performance can perform acrylic cutting with a thickness of 30mm. Because the laser head of this model is specially designed, it shows a bright clean surface without ripples after the acrylic cutting of thick plates.
. Optical fiber laser metal cutting performance Stainless steel can be perfectly cut to 3mm without post-processing. For carbon steel, it can also be cut to a degree of 6~8mm. It is the same grade for professional cutting applications.
JAR HON MACHINERY CO., LTD.
Product Description :
1.Both cutting TAP and forming TAP are suitable.
2.Fully automatic machine so a person can operate many machines.
3.Gear-pitch type auto. tapping will get a precise & accurate thread for finished workpiece.
4.It can option to add inverter or use servo motor to control the spindle speed.
4. Especially suitable for light workpiece.
