Theme
Digital Transformation
Green Transformation
WELE MECHATRONIC CO., LTD.
Product Description :
1.高剛性高穩定性結構
A. 底座：機器底座採用整體式鑄件，有效確保機器剛性。Z底座採4線軌設計，全行程範圍內直接落地支持，有絕佳的剛性及穩定性，確保整體長期幾何精度。
B. 滑座：滑座採用整體式鑄件，支撐於Z底座上，4線軌設計增加滑座負載剛性。
C. 立柱：立柱採用整體式鑄件，有效確保機器剛性；且固定不移動，大大減少主軸移動行程中所帶來的幾何精度誤差影響。
2. XYZ三軸及W軸導軌均採用先進的超重負荷型「滾柱」線性導軌，大幅度提高導軌「剛性」和「重切削能力」，也繼續保有「低摩擦力、低磨耗、低遲滯現象、低失位量、高速度、高精度、高動態特性、高壽命、不需調整」等線性導軌的優良特性。
3.XYZW四軸的均有過負載保護，如因誤操作造成撞機，可有效降低對機器的損傷。
4.雙編碼器回饋裝置（配置於XYZ三個進給軸)，B軸採用(圓光栅-角度編碼器) 廠牌：發格Fagor。
5.主軸箱等關鍵零件係利用「大型臥式搪孔機」及「大型高精度三次元量測儀（三座標量床）」確實達成應有的加工精度，確保優良的組裝基礎。
6.鞍頭：110主軸系統配備搪孔軸直徑110mm，搪孔軸行程W=500mm、3500 rpm(兩檔齒輪箱)。搪孔軸為氮化處理高硬度合金鋼件，前段支持使用傳統的硬化襯套外，後段附加線性導軌的加強支持，借助滾動低磨耗的特性，增長搪孔軸的精度壽命。
7.主軸前軸承採用直徑150mm的高精度主軸軸承，加上改良設計的軸承配置及潤滑設計，有效的提高主軸剛性和壽命。
8.主軸鬆刀採浮動式抓鬆刀裝置，鬆刀時不會施力於主軸軸承上，可長保主軸最佳精度；另，新式鬆刀缸配置設計，可使主軸於任一行程(W軸)位置換刀。
9.特殊設計的自動潤滑系統；潤滑油與切削液分開， 單獨收集可確保切削液的穩定性及工作環境的清潔。
10.刀庫採立柱側背式設計；刀庫與立柱接合，不同於落地型式，立柱固定不移動，刀庫與鞍頭配置可達成左右平衡架構，提高W軸動態穩定特性。
11.承襲歐美先進工具機廠的標準，以嚴格維護的「1.2米x1.2米」高精密度的方形標準平板做為精密度的基礎，對各項關鍵零件進行精密鏟花（刮研），使機器的各處結合面和滑動面均能達到正確的幾何精度，確保機器應有的精度和壽命。
12.採用的各項配套零組件均經過長期使用驗證，可確保機器長期運行的可靠性。
13.電氣箱採全密閉式循環熱交換系統，內部配線均參考德國工業安全標準，電源部份與訊號線區隔，以增加機器使用上的安全。
14.搭配高規格的Fanuc 0i MF Plus數控系統，標準功能包含：15吋彩色液晶螢幕、Fanuc全鍵式操作面板、1280米記憶容量、Ethernet網路接口、Flash記憶卡插口、Manual Guide i圖形對話式編程、剛性攻牙、手動剛性攻牙、AI contour control II等多項高規格功能，能經濟有效的滿足各種使用需求。
15.完整的品檢測試流程，搭配先進的自動光學直準儀、雷射干涉儀、球桿檢測儀、線上動平衡儀等精密檢測儀器，確保出廠的機器都能達到設計的性能和應有的功能。
16.經驗豐富的研發團隊，突破老舊的包袱，協助客戶達成各種特殊需求。
17.兼具經驗和熱誠的服務團隊和完整的服務體系，可以及時有效的讓用戶的機器長保最佳使用狀態。
HAWE Hydraulik Singapore Pte. Ltd. Taiwan Branch
Product Description :
Compact hydraulic power packs are a type of hydraulic power pack. They arecharacterised by a highly compact design, since the motor shaft of the electric drive also acts as the pump shaft. Compact hydraulic power packs are designed to supply hydraulic circuits with hydraulic fluid.
The compact hydraulic power pack type INKA consists of the tank, the integrated motor and the radial piston pump or gear pump directly attached to the motor
shaft. The directly mounted electronic communication box with integrated realtime operating system allows the operating state to be recorded and visualised. The
measured values of the integrated multi-sensor (including the motor speed) can be passed on to the higher-level machine controls via standardised interfaces and processed there.
The consistently modular design of the type INKA means that different usage volumes and delivery flows can be realised quickly and easily from the modular
system. Compatible, ready-for-connection, complete solutions can be assembled easily using a wide range of connection blocks and the valve banks that can be combined with them.
Features and benefits
■ Prepared for condition monitoring with integrated sensors and communication box
■ Optimum efficiency through under-oil motor cooling, direct power transmission,and sophisticated heat dissipation
■ Suitable for nominal operating modes S2 (short period operation) and S3 (periodic intermittent operation)
■ Resource-saving due to small oil filling volume
Intended applications
■ Machine tools and material testing
■ Hydraulic tools
■ Handling systems
■ Presses and processing machines
KAO FONG MACHINERY CO., LTD.
Product Description :
KG series gantry five-sided machining center is able to choose to carry all kinds of automatic additional head (90゜angle milling head, universal head, extension head, speed-up extension head ... etc.) auto tool changer. Standard verticaland horizontal tool changer magazine tool with optional multi-head library for automatic head exchange. Angle head part has 5° division curved tooth with standard high precision, and are able to select 1/2.5°division or watering function at the center. KG5A series bridge crane five-axis machining center is mainly designed for the processing demand on medium and large weight workpieceparts, with world-class high-quality five-axis manufacturing technology to complete the five-axis processing, it synchronously completes vertical, horizontal and a variety of free angle of processings, which substantially increases the processing efficiency. Floor-type workbench with super load capacity, up to 2.5 tonsweight per square meter. Adopting HSK-A63 24,000 rpm high-speed spindle or the heavy cutting spindlewithHSK-A100 10,000 rpm high-torque output depends on different maching applications, which greatly improves the processing efficiency of large workpiece, and fully meets the processing needs of different industries.
YEONG CHIN MACHINERY INDUSTRIES CO., LTD.
Product Description :
￭ The unique IDD spindle design provides power, speed, and stiffness required for the most adverse machining applications while providing long spindle life.
￭ Ceramic bearings help to minimize heat and provide thermal stability improving overall machining accuracy.
￭ High precision rotary encoders in the B and C
axes as a standard feature, allowing for the most demanding machining accuracies.
￭ ø650 mm table provides stable machining performance with a wide machining area and trunnion support.
GENTIGER MACHINERY INDUSTRIAL CO., LTD.
Product Description :
- “U” shaped base is one-piece fabricated for maximum stability and rigidity.
- X-axis federate is transmitted through a specially designed rotating nut, it prevents the ball-screw runs out during rotating and makes feed motion response faster.
- Coolant inter ball-screws on three-axis prevent ball-screw deformation, it suppresses thermal growth and thermal displacement on the ball-screw while assuring smooth feed motions and high positioning accuracy.
HAWE Hydraulik Singapore Pte. Ltd. Taiwan Branch
Product Description :
Directional spool valves are a type of directional valve. They control the direction of
movement and the velocity of single and double-acting hydraulic consumers.
The directional spool valve type CWPN is a 4/3- or 4/2-way directional valve with standard connection pattern NG 6 (CETOP 03). It is directly actuated and a binary
valve.
The directional spool valve type CWPN can be flexibly combined with the common HAWE valve banks and compact hydraulic power packs. It can also be mounted on customer-specific manifolds or sub-plates.
Features and benefits
■ Universally usable thanks to standard connection pattern NG 6 (CETOP 3) according to ISO 4401-03 or DIN 24 340-A6
■ Modular system with various circuit symbols and actuation variants
■ Optionally also available with additional valves in port P
Intended applications
■ Machine tools
■ Wind turbines
■ Solar power plants
■ Industrial hydraulics
EUMACH CO., LTD.
Product Description :
HSM-5X系列是最新的機器與萬能的應用，完美回應數控五軸加工與工件的定位與刀具軸空間要求，為複雜零件的加工提供了廣闊的應用範圍。
本機採用C型架構，機床為高剛性完全支撐結構，機械經久使用，能長時間維持穩定狀態，旋轉銑頭B軸與旋轉工作臺C軸為獨立分開無重迭之兩旋轉軸，便利於工件、刀具及夾制具等設計及擺放，尤其相互干涉現象較旋轉兩軸重迭之銑頭或工作臺大幅減少。並可選用車銑主軸及高速旋轉工作台，達到車銑複合綜合加工。
HSM-5XC是大型高效切割和加工應用的最佳解決方案，無論您的重點是靈活的單元生產還是大批量精密製造，如航空工業的渦輪葉輪，葉盤等，或醫療的心臟瓣膜，人工關節或牙齒等，當然，一般加工，如模具加工或僅5面或多面加工都非常容易！
本機採用實的米漢娜鑄鐵結構，三軸為重型滾柱直線導軌進給系統，能很短時間內加速到48m/min，三軸行程1020/610/610mm，力矩電機驅動B軸連續擺動銑頭0.001角度分割，旋轉範圍-30~120ﾟ，裝進口電機主軸26&32Kw / 124&154Nm / 18000RPM/HSK-A63設計及標準長工作台崁入φ610mm由力矩電機驅動的旋轉工作臺(C軸)，最大轉速50RPM承重500KG，搭配HEIDENHAIN TNC640，15”螢幕的五軸連動控制器，HEIDENHAIN高精度三軸光學尺，刀臂式60把刀，該加工中心用於多面高性能加工和最智能的加工概念提高了生產力。
YING HAN TECHNOLOGY CO., LTD.
Product Description :
5-AXIS VERTICAL MACHING CENTER BELONGS LINEAR WAYS ON THREE AXES, X, Y, Z -AXIS TRAVEL: 800x600x550mm, MEEHANITE CAST IRON IS TEMPERED FOR STRESS RELIEF TO ENSURE STRUCTURAL STABILITY WITHOUT DEFORMATION. REINFORCED COLUMN BASE GREATLY INCREASES STRUCTURAL STRENGTH AND WILL EXHIBIT ULTRA-HIGH STABILITY DURING HIGH SPEED OPERATION. WITH THE EQUIPMENT OF CNC TILTING ROTARY TABLE, THE MACHINE IS ABLE TO PERFORM 5-AXIS MACHINING, IT CAN MACHINE COMPLEX, MULTI-SIDED PARTS IN A SINGLE SETUP, THEREBY REDUCING SETUP TIME WHILE INCREASING PART ACCURACY.
CAMPRO PRECISION MACHINERY CO., LTD.
Product Description :
Campro manufactures a family of Double Column Machining with size up to 5,200 x 3,100 mm travels. The machines offer the highest accuracies of any bridge mill on the market and can machine large parts efficiently with its rigid design. The extended Y-axis has full supported and constructed with a base/bed casting. The PV-XX16 (1,600 mm travels on Y-axis) is one-piece monoblock column structure that is bolted to the bed, delivers rigidity and stability. The PV-xx21 and PV-xx26 have wider door span and bigger machining range, the optional 1,000 mm Z-axis travel is best for attached head requested user.
YIDA PRECISION MACHINERY CO., LTD.
Product Description :
1. T structure bed with high-quality cast-iron frame for enhanced rigidity and stability.
2. Extremely rigid mobile column with linear guide ways ensures stability and cutting accuracy while allowing rapid traverse of the X, Y and Z axes.
3. High rigidity roller type linear guideways, rugged massive linear guideways on X, Y and Z axes maintain precision and ensure a rapid traverse rate.
GENTIGER MACHINERY INDUSTRIAL CO., LTD.
Product Description :
1. High Speed, stability, and high precision provide a competitive edge in precision mold and die machining.
2. Precision cooling system with thermal compensation function to improve accuracy.
3. Environmental protection design reduces environmental pollution.
4. Could be equipped with automation/remote monitoring to improve production efficiency.
5. The machine's appearance combines fashion and technology while injecting the meaning of high speed, stability, and eco-friendly
VISION WIDE TECH CO., LTD.
Product Description :
GSF Series 5-axis Gantry Type Machining Center, provided excellent 5-axis simultaneous accuracy performance for 5-axis machining in mold cutting, highly precise contour finishing, milling, drilling, and tapping. Vision Wide manufactured the 5-axis machining center to shorten tool displacement travel and cutting process effectively, and to extend tool lifetime and offer the best choice for composite angle machining. GSF Series had excellent dynamic performance on one-piece structural and equipped high accuracy 2-axis head to achieve 5-axis simultaneous accuracy performance.
•Continuous 2-axis head
•5 axis dynamic rotation synchronization accuracy (TCPM) 0.04mm.
•Built-in Spindle Direct-Driven on B&C axis, 12,000~24,000rpm spindle speed.
•Backlashless driving on B/C axis，Rotation Positioning accuracy ±5”.
•Low table height, closer operating zone, wider door width are convenient design for user.
•Chain type chip conveyor (standard) is able to remove iron chips efficiently.
